FPT DINOMAX

FPT Industrie DINOMAX

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.200 mm, pomik po osi Z: 1.100 mm, hitrost pomika os X: 50 m/min, hitrost podajanja osi Y: 50 m/min, hitrost podajanja os Z: 50 m/min, dolžina mize: 4.000 mm, širina mize: 2.000 mm, največja hitrost vretena: 22.000 obr/min, vrtilni moment: 128 Nm, nos vretena: 63, CNC Heidenhain iTNC 530 S.P. WORKING RANGE X-axis longitudinal travel: 4,000 mm Y-axis transverse travel: 2,200 mm Z-axis vertical travel: 1,100 mm Maximum speed with interpolating axes: 50 m/min WORKTABLE Dimensions: 4,000 x 2,000 mm Height: 300 mm Load capacity: 15 T/m² T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling pads. Orientation of T-slots: parallel to the X-axis movement. AXIS CHARACTERISTICS: Feed rate: 50,000 mm/min Acceleration: 4 m/sec² WORKING CLEARANCES Maximum horizontal passage: 3,200 mm Maximum vertical clearance under crossbeam: 1,926 mm Table height from the floor: 330 mm CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE HOLDER Automatic universal head indexed to 360,000 positions (every 0.001°). The rotation movement is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut. Integrated cooling system for bearings and axis motors. Hsdpfx Aqezb Evletot B-axis rotation range: +/- 185° A-axis rotation range: +/- 185° Maximum axis rotation speed: 30 rpm Maximum working torque on A/C axis: 450 Nm Axis clamping torque: 1,400 Nm Available spindle power (S1/S6): 22/33 kW Available spindle torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Tool interface: HSK – A63 DIN 69893 The head is supplied complete with cradle for handling and storage. The cradle is used outside the effective working area, so it does not reduce the machine’s actual capacities. 30-POSITION HSK CHAIN TOOL MAGAZINE: Automatic chain-type tool changer with 30 stations located on the rear side of the work area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter with adjacent stations occupied: 90 mm Max tool length: 300 mm Max tool weight: 10 kg MEASURING SCALE PRESSURIZATION: Complete pneumatic system with control unit for pressurization of measuring scales. SPRAY-MIST TOOL COOLANT SYSTEM: Mist lubrication system. The mist is produced by mixing air and oil. Activated via M function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and acts as a coolant. Very useful for improving finishing quality. EXTERNAL TOOL COOLANT: Coolant supply system managed by CNC with nozzles arranged on the spindle flange, complete with 1,200-liter tank for collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS: Maximum installed power: 150 kW Maximum required current: 235 A The machine is complete with: • Remote electronic handwheel Heidenhain HR550 • Various tool sets included • Renishaw probe • BLUM laser presetter • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and electrospindle • Two chip conveyors on either side of the worktable • User and maintenance manual with CE declaration of conformity

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, Prodajamo ta stružnica. Priloženi so lunete in dodatna rezkalna naprava. Dolžina struženja: 8000 mm Hedpfx Aqjx Auwgotjt Premer nad ležiščem: Ø 2020 mm Premer nad prečnim pomikom: Ø 1600 mm Vrtina vretena: 120 mm Obrati / območja: 180 obr/min Moč vretena: 80 kW Premer konjička: Ø 400 mm Hod vretena: 250 mm Mere: Dolžina: 15360 mm Širina: 3520 mm Višina: 2600 mm Teža: 78000 kg Stroj se nahaja v kompleksu nekdanjih livarn Vítkovice v Ostravi, Češka. Stroj je priključen in ga je možno preizkusiti. Lahko pošljemo video stroja preko WhatsApp-a.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 2.200 mm, pomik po osi Z: 1.100 mm, dolžina mize: 4.500 mm, širina mize: 2.500 mm, največja hitrost vretena: 22.000 obr/min, CNC Heidenhain iTNC 640 WORKING AREA X-axis longitudinal travel: 4,000 mm Y-axis transverse travel: 2,200 mm Z-axis vertical travel: 1,100 mm Maximum interpolated feed rate: 50 m/min WORKTABLE Dimensions: 4,500 x 2,500 mm Height: 300 mm Load capacity: 15 T/m² T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling pads. T-slot direction aligned parallel to the Y-axis movement. UNIVERSAL CONTINUOUS POSITIONING HEAD FOR ELECTROSPINDLE Automatic universal head indexed at 360,000 positions (every 0.001°). Rotational movement is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for 10° undercuts. Internal cooling system for bearings and axis motors. Rotation range C-axis: +/- 270° Rotation range A-axis: +/- 185° Maximum rotation speed of axes: 30 rpm Maximum working torque on A/C axes: 450 Nm Clamping torque on axes: 1,400 Nm Spindle output power (S1/S6): 22/33 kW Spindle output torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Hjdpfxjyv In Ij Aqtjt Constant power speed range: 3,000 to 18,000 rpm Constant torque speed range: 10 to 3,000 rpm Tool holder: HSK – A63 DIN 69893 ELECTROSPINDLE HSK – A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM: Spindle output power (S1/S6): 37/43 kW Spindle output torque (S1/S6): 140/165 Nm Maximum spindle speed: 15,000 rpm Constant power speed range: 2,500 to 12,000 rpm Constant torque speed range: 10 to 2,500 rpm Tool holder: HSK – A100 DIN 69893 55-POSITION CHAIN TOOL MAGAZINE, HSK - A100 / HSK – A63: Floor-mounted fixed chain magazine located at the rear of the machine, enclosed for operator safety, with a vertical tool change arm and automatic tool preparation. "Fixed position" management. Hydraulic axis locking Total tools: 55 Tool type: HSK-A63 DIN 69893 Tools: 30 Maximum tool diameter: 90 mm Maximum tool diameter with adjacent slots free: 160 mm Maximum tool length: 300 mm Maximum tool weight: 10 kg Tool type: HSK-A100 DIN 69893 Tools: 25 Maximum tool diameter: 100 mm Maximum tool diameter with adjacent slots free: 160 mm Maximum tool length: 450 mm Maximum tool weight: 20 kg REQUIRED CONNECTIONS: Maximum installed power: 177 kVA Maximum required current: 235 A Machine equipped with: • Remote electronic handwheel Heidenhain HR550 • High-pressure water and air through spindle • Semi-automatic electrospindle change, with HSK – A63 and HSK – A100 interfaces • Assorted tooling included • Renishaw probe • BLUM laser presetter • AUTOCAL automatic head calibration system • Visormax remote monitoring subscription • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • User and maintenance manual and CE declaration of conformity

Stanje: rabljeno, STRUŽNIŠKI CENTER "MORI SEIKI" MOD. ZL 200SMC Z dvojno motorizirano revolversko glavo in kontraspenjalom CNC MSC-501 Hodpfx Ajxwxwtjqtot Dolžina struženja mm 452 Maksimalni premer struženja mm 388 Maksimalni premer nad ležiščem mm 510 Razdalja med konicama mm 751 Vpenjanje vretena A2-6 Hitrost vretena 4.000 vrt/min Moč vretena 11 kW Število orodij 12

Stanje: rabljeno, Leto izdelave: 2004, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 2.500 mm, pomik po osi Z: 1.400 mm, CNC HEIDENHAIN iTNC 530 HOD OSI X 6000 MM HOD OSI Y 1400 MM HOD OSI Z (VERTIKALNO) 2500 MM PRITRDITEV VRETENA ISO 50 DIN 69871-B50 OBRATI VRETENA 5000 RPM MOČ MOTORJA S1 37 KW - S6 56 KW AVTOMATSKA INDEKSIRANA GLAVA 1° X 2,5° MENJALNIK ORODIJ Z 40 MESTI NOTRANJE IN ZUNANJE HLAJENJE ODVAJALNIK OSTRUŽKOV PRITRDILNA MIZA 8000 X 2000 MM Hjdpfsxhqivjx Aqtet OBODNE ZAŠČITE

Stanje: dober (rabljeno), Leto izdelave: 2018, Ref. št.: 10531 Proizvajalec: HONOR SEIKI Tip: VL - 400CM Leto izdelave: 2018 Vrsta krmiljenja: CNC krmiljenje Krmilnik: Siemens SINUMERIK 840D Lokacija: Halberstadt Država izvora: Tajvan Št. stroja: 79XXX C-os: da Hitrost vrtenja C-osi: 50 - 2250 min⁻¹ Višina struženja: 2370 mm Premer mize: 4000 mm Hitrost hitrega pomika X-os: 10 m/min Hitrost hitrega pomika Z-os: 10 m/min Hitrost vrtenja mize: 1 - 85 min⁻¹ Največja teža obdelovanca: 30 kg Največji premer struženja: 4 mm Razdalja med plansko ploščo in prečno konzolo: 820 – 3320 mm Pomik suportne letve: 300 x 300 mm Hedpfxszc Dz Nj Aqtot Število orodij v verižniku: 24 Glavni pogonski motor vretena: AC 60/75/100 kW Servomotorji (X/Z osi): 5,5 / 5,5 kW Dolžina stroja: 9 mm Širina stroja: 7000 mm Višina stroja: 8000/9100 mm Teža stroja cca: 115 t Dodatne informacije: - 2-stopenjsko prestavljanje - ATC (avtomatska menjava orodij) 16/20/24 - Velikost orodja 25 x 32 x 40 - Motor za gnano orodje AC 15/18,5 kW Stroj je še vedno v proizvodnji in si ga je možno ogledati po dogovoru.

Stanje: rabljeno, Leto izdelave: 2018, Primerno za ponovno brušenje in izdelavo novih orodij za obdelavo lesa in kovin vseh vrst. Dodatna oprema: Polna zaščita Robotski podajalnik Fanuc s 6 nadzorovanimi osmi in sistemom kamer Hedpfx Aqjzdc Rlotjt Programska oprema Toolstudio Standard & Advanced, različica 3 Programska oprema Helitronic Toolstudio, možnost Step Tools/Drills Avtomatski sistem za gašenje požara, Hladilnik pogona za vse pogone Merilna sonda, Posoda za zbiranje olja, Steklene merilne letev na linearnih osi, Elektrostatični sistemi za odstranjevanje hlapov, Pnevmatska naprava za vpenjanje obdelovanca, Avtomatska, hidravlično upravljana podpiralna opora Merilni čep ISO 50, 3 nosilci za brusilne diske. Dolžinski gib (os X): 400 mm Avtomatska os X' za premikanje nosilca obdelovanca: 110 mm Vertikalni gib (os Y): 320 mm Prečni gib (os Z): 320 mm Območje vrtenja rotacijske mize (os C): –110° - +/160° Območje vrtenja osi B (brusilna glava): +/-20° Nosilec obdelovanca (os A): ISO 40 Območje hitrosti vrtenja: min Premer obdelovanca v proizvodnji: 0,1 – 12,7 mm Premer obdelovanca pri ponovnem brušenju: 2 – 12,7 mm maks. dolžina obdelovanca: 120 mm Dolžina reza: 70 mm Moč pogona brusilnega vretena 1: 5 kW Moč pogona brusilnega vretena 2: 1,5 kW Moč pogona brusilnega vretena 3: 1,5 kW Število vrtljajev brusilnega vretena, brezstopenjsko: 0 – 10.000 vrt/min. Priključna moč: 18 kW (400 V / 50 Hz) Teža: približno 6000 kg Dimenzije Š x G x V =: 2385 x 2200 x 2006 mm Barva: RAL 9003 bela / siv RAL 7011

Stanje: zelo dobro (rabljeno), MECOF AGILE CS 500 TNC 640 boring mill in excellent technical condition Technical data: – Spindle taper: ISO 50 – Longitudinal travel: 6000 mm – Cross travel: 1250 mm – Vertical travel: 1700 mm – Table size: 7300×1090 mm + (2 x 1520×1000 mm CUBES) – Spindle speed: 4000 rpm – CNC controller: fidia CXR – Tool changer capacity: PICK-UP MAGAZINE 10 POSITIONS (5 ISO 50 – 5 HSK 50 E) – Power: 30 kW SPINDLE The MECOF AGILE CS 500 TNC 640 offers a wide range of features and technical specifications to meet the most diverse requirements. With a longitudinal travel of 6000 mm and a cross travel of 1250 mm, it allows precise drilling and milling operations on large workpieces. The vertical travel of 1700 mm provides maximum flexibility and enables machining of workpieces at various angles. The table size is 7300×1090 mm and is complemented by two additional cubes of 1520×1000 mm each. In this case, the machine has been installed at floor level. This boring mill is equipped with a powerful 30 kW spindle motor, delivering a maximum spindle speed of 4000 rpm. The fidia CXR CNC control ensures precise programming and user-friendly operation. The 10-position tool changer (5 ISO 50 – 5 HSK 50 E) enables fast tool changes to optimize the production process. The machine has always been serviced and is in flawless technical condition. It can be inspected under power and during ongoing production. Comprehensive accessories included Further images available. Dismantling, removal, shipping, and reinstallation can be organized. Hodpey Rzklefx Aqtet

Stanje: rabljeno, Leto izdelave: 2007, x-os 3.600 mm y-os 920 mm z-os 820 mm Krmilni sistem iTNC530 Heidenhain B - os +/- 90 x 1 ° C - os 360 x 0,001 ° Hitrost podajanja osi X/Y/Z 1 - 20.000 mm/min Hitrost hitrega premika osi X 100 m/min Hitrost hitrega premika osi Y 60 m/min Hitrost hitrega premika osi Z 60 m/min Število vrtljajev vretena - brezstopenjsko 20 - 10.000 vrt/min Vpenjalna konica orodja SK50 Moč pogona 100 % ED 32,00 kW Moč pogona 40 % ED 48,00 kW Navor pri 40 % / 100 % ED 294 / 196 kW Ploščina pritrditve mize 4.200 x 900 mm Število T-utorov 9 Razdalja med T-utorovi 100 mm T-utor 1x 18H7 / 8x 18H12 Obremenitev mize - osrednja/maksimalna 4.200 kg Revija za orodja: 80 Premer orodja 115 mm Premer orodja pri 2 prostih mestih 160 mm Dolžina orodja - maks. 360 mm Teža orodja maks. 12,00 kg Skupna potrebna moč 85,00 kW Teža stroja pribl. 32,00 t Potreben prostor pribl. 11,50 x 6,60 x V3,30 m Vertikalni obdelovalni center s krmilnim sistemom HEIDENHAIN iTNC530, vrtljiva glava za frezanja, pregradna stena, rega za orodja z 80 mesti, sistem za odvajanje žagovine, Hedpfjy Sbiksx Aqtot sistem za hlajenje, vstavna miza NC Ø700 mm, način delovanja 4.

Leto izdelave: 2002, stanje: nepreverjeno (rabljeno), Robot No operator panel + connection cables Hedpfx Aqogu U Itstet Used, untested robot. No teach pendant. Not tested.