Stroj za robne trakove

Format4 Tempora F600 / 60.06 ELX

Stanje: rabljeno, Leto izdelave: 2018, Edge Banding Machine AKV 3006 DK-F with Jointing Cutter Unit including DIA Tools - Jointing thickness up to 40 mm - Workpiece thickness up to 3 mm - Combination milling station Radius R 2.5 mm Technical Description: - Hot-melt glue application to the workpiece for edge materials up to 3 mm - Workpiece thickness: 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable knives (combination design) and fine adjustment of the cutter from the operator side - Provision for additional processing units (System Hebrock) - Feed rate approx. 10 m/min - Cutting depth adjustment of the trimming saw Bdedpexfh Tmofx Afqok - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically positioned control panel - Double roller top pressure beam - Aggregate viewing window from the rear and operator side of machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m / min - Panel thickness: 8 - 40 mm - Weight: depending on configuration approx. 1550 kg - Dimensions (L x W x H): 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment (1 pc) Switchable radius/chamfer for combination milling stations. Switching between chamfer or flush is manual by repositioning the stop flap inside the machine. Buffing unit (polishing mop): 1 pc Corner rounding cutter: 1 pc, incl. combination tool and pneumatic radius/chamfer adjustment, max. workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm Radius scraper: 1 pc, incl. pneumatic retraction device, radius R 2.0 mm Flat scraper: 1 pc with pneumatic control Glue station quick-change system including second glue pot and downward glue discharge (1 pc) for rapid color change Horizontal grooving saw unit into the edge: 1 pc, incl. pneumatic retraction and groove tool Separate extraction for jointing unit: 1 pc, direct connection on the jointing unit, vertical above, d = 80 mm for optimal extraction performance; strongly recommended from model AKV 3005 DK-F Ball bearing for corner rounding cutter, 24.1 mm: 1 pc Ball bearing for corner rounding cutter, 24.2 mm: 1 pc Replacement motor 0.37 kW for corner rounding cutter, with quick-change system including radius cutter R 1 Replacement spindles, 1 set = 2 pcs 1 set quick-change motors for longitudinal machining, top and bottom, including tool R 1 Compressed air requirement: 100 – 150 l/hr Location: Nattheim

Stanje: novo, Leto izdelave: 2024, IN STOCK!!! Max. edge thickness: 3 mm Min./Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Ready for operation: approx. 3.5 min Weight: approx. 900 kg Max. power consumption: Ø approx. 7.4 kW Extraction port: Ø 1 x 140 mm Electrical connection: 400 V - 3 Ph - 50 Hz Working table height: approx. 900 mm Bedpfx Afshymgdeqsdk Feed speed: approx. 10 m/min Machine dimensions: approx. 4,300 x 1,300 x 1,400 mm (LxWxH) Combination milling head Radius cutter R=2 mm Radius corner cutter R=2 mm Radius scraper blade R=2 mm

Stanje: rabljeno, Leto izdelave: 1997, Beam planer 260 x 160 mm, trailing chamfering unit on upper spindle, air cushion table with two-axis control for left and upper spindle, brand new control system (latest Weinig version). Maximum working width: 260 mm Maximum working height: 160 mm Number of spindles: 6 units 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW (shared motor with left spindle) 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering unit Motor brakes: mechanical Height adjustment for upper spindle: electrical Optional with/without feed Feed brake system: Yes Feed speed steplessly adjustable up to 3 - 23 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan Lubricant pump: manual Max. planing depth: 10 mm Jointing rebate cutter on jointer: Yes Powered rollers in table: 1 unit Control type: PLC control Spindle position display: mechanical numeric indicator Infeed rollers before jointer: Yes Air cushion table: three-track Central lubrication point: Yes Description: short infeed table 1050 mm with internal light Bdedpewwwkhjfx Afqsk Location: Nattheim

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, OTT model JU 2513 Hidravlična furnirska stiskalnica z elektro grelnimi ploščami Izvedba s podbatnicami BUSSE elektro grelne plošče Centralna nadzorna plošča z vsemi upravljalnimi elementi Analogni prikaz temperature za obe grelni plošči Pritisk stiskanja brezstopenjsko nastavljiv s tlačnim stikalom Glavno stikalo Bsdpsxgpaqofx Afqsdk dvostopenjska hidravlična črpalka z avtomatskim preklopnim ventilom iz nizkega v visok tlak Varnostna vlečna vrvica Izravnava z zobato letvijo Omejevanje hoda CE Stisna površina: 2500 x 1300 mm Število stiskalnih valjev: 4 Skupna stiskalna sila: 70 t Obratovalna napetost: 3 x 400 V + N, 50 Hz. Skupna priključna moč: pribl. 20,3 kW Potreben prostor (D x Š x V) pribl.: 2900 x 1250 x 1900 mm Teža: pribl. 3200 kg

Stanje: rabljeno, številka stroja/vozila: 007134, Vrsta pritrjenega roba: tanek rob, močan rob, masivni les Lepljenje: EVA, vroči zrak Spojno rezkanje: da Večnamenska enota: da Bedpet Hmtzofx Afqsdk Zgornja rezkalna enota: da Maks. podajalna hitrost: 25 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 10 kos

Stanje: zelo dobro (rabljeno), Single-sided edge banding machine (LEFT) Edge thickness (tape, min/max) mm: 0.3 - 3 Edge thickness (solid strips min/max) mm: 3 - 12 Panel thickness (min/max) mm: 8 - 60 Control system: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: Driven by V-belt Sprayer unit (for liquid non-stick agent) Jointing milling unit 08.376 (2 x 3 kW) Gluing unit (hot melt adhesive) 283.1513 Pressure zone for edging Edge magazine for tape (compartment no.): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius and profile milling) 08.342 (2 x 0.66 kW) servo-controlled Profile scraping unit 08.519 Flat scraping unit 08.50 Bodpfjd Nuu Hex Afqjdk Buffing unit 08.612 (2 x 0.25 kW)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, vrsta nastavitve višine: mehanski, vhodna napetost: 400 V, potrebna višina: 1.200 mm, Edge banding machine equipped with: - Trimmers - Edging tape magazine - Interchangeable hotmelt glue pot for EVA or PUR - Flush trimming - Corner rounders Bdodpfx Afswy Ugxeqjk

Stanje: rabljeno, številka stroja/vozila: 008018, Tip pritrjene obrobe: tanka obroba, močna obroba, masiven les Lepilni sistem: EVA, PUR Spojno rezkanje: da Multifunkcijska enota: da Maks. podajalna hitrost: 20 m/min Maksimalna debelina plošče: 60 mm Delovne enote: 7 kos Bdedpjwv Dfcefx Afqok

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0-250-87-6869, Vrtalna glava z 8 vreteni (V8 SW/32) Horizontalna vrtalna glava s 4 vreteni v smeri X Horizontalna vrtalna glava z 2 vreteni v smeri Y Žaga za utore D=100 mm (smer X) Zaporni cilinder za pozicioniranje obdelovanca Bjdpfovtyc Hjx Afqjdk Sistem za vpenjanje obdelovanca Dolžina obdelovanca 2500 mm Debelina obdelovanca 12–60 mm WOODWOP za stroj WOODWOP IMPORT DXF BASIC (1 licenca)

Stanje: novo, Leto izdelave: 2025, Robland products are manufactured by Landuyt N.V., headquartered in Bruges, Belgium. BM-3000: • Grooving saw unit (maximum groove depth 10 mm) • Left drill bit 5 mm for creating row drill holes • 20 mm drill bit for the installation of Minifix systems • 8 mm milling cutter for limited drilling and milling applications • 35 mm drill bit for hinges • The panel thickness that can be processed is 12–40 mm Bodpfxed Hz Nij Afqjdk • The machine is equipped with a 4-position drill chuck and a saw blade • Y-axis range: Drilling: 900 mm / Sawing: 850 mm Technical Data: • Y-axis range: - Drilling: 920 mm - Sawing: 860 mm • X-axis support: 3000 mm • Z-axis (panel thickness): 12 mm to 40 mm • A-axis rotation: 360° • Feed speed: 20 m/min • Minimum panel dimensions (X) 300 x (Y) 120 x (Z) 12 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Maximum and minimum drill hole diameters: 3 mm – 35 mm • The saw moves along the X-axis • Maximum groove depth with saw blade: 10 mm • Motor: 0.75 HP, 3x 400V/ 3x 230V • Minimum required extraction capacity: 2300 m³/h