Stroj za robne trakove

Format4 45.03 LX

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 4.650 h, največja debelina roba: 3 mm, višina izdelka (maks.): 45 mm, višina izdelka (min.): 10 mm, dolžina izdelka (min.): 140 mm, širina izdelka (min.): 70 mm, TECHNICAL DETAILS Machine Frame: Tempora 45.03L, made of thick-walled electro-welded steel construction Control System x-motion plus control: Swiveling 15" smartouch panel Unlimited storage space for user-defined edging programs Fine adjustment of travel path parameters Optimization of edge overhang during pre-trimming front and rear Feed Chain Feed speed: 9 m/min Drive motor: 1.5 kW (S6) Precision running and guide surfaces Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm Segmented, rubber-coated support pads with quick-change system Rotary Table Edge Magazine Roll edge material diameter: 740 mm Roll edge material thickness: 0.4 – 3 mm Extension Frame Workpiece support: extendable up to 450 mm with roller conveyor for ergonomic handling of larger workpieces Upper Pressure Beam Workpiece height: 8–45 mm Pressure beam made of welded, torsion-resistant steel construction Upper pressure rollers arranged in double-row staggered layout Edge Feeding Powered, rubber-coated feed roller Edge thickness: 0.4 – 3.0 mm Workpiece Feed Extendable workpiece support: up to 450 mm Jointing unit material removal: 0 – 2 mm (on feed fence), digital counter Jointing Unit Power: 2.2 kW, diamond cutter Z2, speed: 12,000 rpm 2 x 1.1 kW (1.5 hp) Material removal: max. 2 mm Workpiece height: max. 45 mm Jointing cutter with diamond blades Z2+2, D-80 x 49 mm (for angular and tear-free workpiece edges) Glue Unit Glue unit: Teflon-coated, for 1.5 kg EVA or PUR granulate Heat-up time: 10 minutes Linear meter performance: 375 lm (at 19 mm panel) Fine-adjustable glue roller Pressure Unit 1 aluminum roller at 90° angle 1 rubber-coated pressure roller Guillotine Shears Roll edge material thickness: 0.4 – 3 mm For pre-trimming, oscillating End Trimming Saw Unit 0.15 kW, speed 12,000 rpm with 90° round shaft guide End trimming saw with 45° travel path, 0.35 kW, 12,000 rpm Selectable between 0° and 10° cut angle Milling Unit Multifunctional milling unit: x-motion plus, 2 high-frequency motors, each 0.75 kW, 12,000 rpm Replaceable cutters: 4 pieces each Ffedpfswwq Dzsx Abvsw Precision: 2-axis adjustment enables fine tuning in the 1/100 mm range Motorized Corner Rounding Unit Corner processing unit for post-formed and softforming profiles Workpiece height: 10 – 45 mm Edge thickness: 0.4 – 3 mm TCT cutter with 2 blades Radius: max. 6 mm Workpiece length: min. 270 mm (at 19 mm height) Radius Scraper Unit Processing of 2 mm plastic edges Scraper adjustment via digital counter and m-motion positioning system Scanning of workpiece contours Polishing Unit Upper and lower polishing unit Spray device for cleaning agents Flat Scraper Upper and lower flat scraper for residual adhesive removal. Scanning of workpiece contours Multifunctional Milling Unit for Cup Hinge Boring For processing workpieces with cup hinge bores, back panel grooves and acute-angled workpieces

Stanje: dober (rabljeno), Leto izdelave: 2011, Panelna žaga HOLZ-HER Tip: 1255 Stanje: rabljeno Fjdpfx Aox Hyr Hsbvefw Leto izdelave: 2011 Dolžina reza: 6300 mm (maks.) Navpična višina reza: 2200 mm (maks.) Vodoravna višina reza: 2200 mm (maks.) Debelina obdelovanca: 60 mm (maks.) Višina predreza vodoravno: višina reza Višina predreza vodoravno: 2040 mm (maks.) Napetost: 400V 50 Hz Teža: 920 kg Oprema: - Navodila za uporabo - Naslednji UVV pregled: 05/2026

Stanje: novo, Leto izdelave: 2022, Working width: 630 mm Planing height: 300 mm Cutterblock: Tersa Number of knives: 4 Height adjustment: electric Planing thickness display: digital readout Feed speed: infinitely variable 5 - 22 m/min Infeed roller: steel Pressure bar: segmented Ffsdpfol D Rxfsx Abvsw Outfeed roller: rubber, 2x Table rollers: no Motor power: 9.2 kW Extraction connection: 160 mm Machine length: 1200 mm Machine width: 1200 mm Weight: 1000 kg

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, SCM Olimpic K 560 Automatski stroj za kantiranje, godina 2018 na prodaju! Kompletacija: - Lančani transport s brzinom 12/18 m/min - Debljina trake za kantiranje: 0,4–3 mm - EVA ljepilo - Jedinica za glodanje ploča "RT-V" - Jedinica za nanošenje ljepila „VC-S4.1“ - Jedinica za rezanje ruba "K-SEL" - Jedinica za glodanje ruba "R-K" - Jedinica za zaobljenje kutova "ROUND X" - Jedinica za struganje ruba RAS-K - Jedinica za poliranje SP-V Tehničke karakteristike: - Brzina transportera (dvije brzine) m/min: 12 - 18 Ffedpfew Sw Tkjx Abvsw - Minimalna/maksimalna debljina obratka mm: 8 - 60 - Debljina lijepljenog drvenog ruba mm: 0.4 - 6 (8 mm kod HP kompozicije) - Debljina lijepljenog rubnog traka mm: 0.4 - 3 - Maksimalna površina lijepljene trake mm²: 135 - Promjer nosača kalema („tanjur“) mm: 780 - Maksimalno preklapanje lijepljenog ruba u odnosu na obradak mm: 2+2 - Minimalni razmak između transportiranih komada mm: 600 - Minimalna duljina obratka (pri minimalnoj širini od 100 mm) mm: 140 - Minimalna duljina trake mm: 180 - Minimalna duljina drvenog ruba mm: 220 - Minimalna širina obratka (pri minimalnoj duljini od 210 mm) mm: 95 (60 mm opc.) - Širina produžetka stola mm: 560 - Visina radne površine od poda mm: 900 Jedinica za glodanje ploča „RT-V“: - Maks. površina skidanja odvarka mm²: 55 - Maks. debljina glodanja mm: 3 - Minimalna/maksimalna debljina obratka mm: 8–45 (60 mm opc.) - Snaga motora kW: 2 x 1,5 - Promjer glodala mm: 100 - Visina glodala mm: 49 (64 mm opc.) - Brzina rotacije alata o/min: 9.000

Stanje: rabljeno, številka stroja/vozila: 007913, Tip nameščenega roba: tanek rob, debel rob Lepilni sistem: EVA, vroč zrak Fjdswkf Dvopfx Abvsfw Spojno rezkanje: da Multifunkcijska enota: da Maksimalna debelina plošče: 60 mm Delovni agregati: 7 št.

Stanje: rabljeno, številka stroja/vozila: 006370, Type of applied edging: thin edge, thick edge Gluing system: EVA Fodpfx Abjl Txw Hsvjfw Joint milling: yes Multifunction unit: yes Top milling unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 12 units

Stanje: rabljeno, Leto izdelave: 2017, Direct numerical control (NC HOPS) with Campus software Working area X-axis: 3400 mm Working area Y-axis: 1600 mm Working area Z-axis: 300 mm Worktable with 6 adjustable rails No. 3 suction cups per work rail for securing the workpiece No. 1 electro-spindle, 5 axes, 10 kW, with automatic tool changer, cone type HSK F63 Drilling head with 24 spindles as follows: - No. 12 vertical spindles, Y-axis - No. 6 vertical spindles, X-axis - No. 4 horizontal spindles, Y-axis - No. 2 horizontal spindles, X-axis Automatic tool change system with 18 positions - located at the rear of the machine Front guard and safety system with mats and safety nets Automatic lubrication system Air conditioning for control cabinet Fodpfx Aowwiybjbvefw No. 1 vacuum pump

Stanje: zelo dobro (rabljeno), Panel dividing saw angular system Control: OSI Plus - Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lifting table (mm): 4500 x 2200 1st pusher saw with grippers (qty): 5 Rotating device (for panels) up to 90° 1st panel dividing saw max. cutting width (mm): 4500 Ffedpfxeukhd Aj Abvow Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 Waste cutting shear 2nd pusher saw with grippers (qty): 10 2nd panel dividing saw max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 No. 2 front air flotation tables (mm 2200 x 1500) Automatic unloading bridge for cut panels "RBO (BIESSE)" Model Lifter with 6 stacking positions

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.935 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X = 4600 mm, Y = 1935 mm, Z = 275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a chip conveyor belt, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 machine we offer for sale. Contact us for more information. Working Table and Clamping • 8 ATS panel supports (L = 1525 mm) and 24 sliding rails • Automatic positioning of panel supports and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working zones in X • 8 rear reference stops, stroke 115 mm • 8 stops with 140 mm stroke, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops with 140 mm stroke, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, 140 mm stroke (2 left + 2 right), pneumatic system • 4 removable center stops, 140 mm stroke (2 left + 2 right), with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting support bars • 6 lifting support bars for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Processing Units and Configuration • C3-A1 configuration: • Device for fitting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for fitting units on a machining group with 5 interpolating axes (units can only be used when the electric spindle is vertical) • C3-P2 configuration: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • BH 42 L drilling head • Chain tool changer with 22 positions (180 mm center-to-center) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electrospindle or 15 kW 5-axis electrospindle (requires chip deflector device; requires flange for mounting units when using a 5-axis electrospindle; requires C-axis when using a standard electrospindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment Fjdpfx Ajx D H Hcjbvofw • Conveyor belt for removal of chips and scrap parts (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electrospindles or one electrospindle plus one liquid-cooled drilling head) Note: The technical data and descriptions are taken from the original order confirmation and are for informational purposes only; they are not binding.

Stanje: dober (rabljeno), Leto izdelave: 2019, CNC throughfeed machining center with dual clamp drive in X-axis direction and gantry construction in Y-axis direction. The second gripper enables sizing down to 15 mm as well as continuous milling movement in the X-axis direction. The workpiece is measured in length (X-axis) using a sensor. Working area: X-axis 3,500 mm Y-axis 950 mm Z-axis 80 mm Milling spindle: 12 kW HSK-F63, max. 24,000 rpm 4-position linear tool changer for milling tools. Maximum tool diameter: 120 mm Maximum tool length: 100 mm Single pick-up station for ergonomic tool loading or unloading into/out of the machine. Alternatively, can be used as an additional tool station for 11 virtual tools. Automatic tool length measuring system in Z-direction Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter 8 mm; lengths: 20, 25, 30, 35, or 40 mm Ffjdpsxrahcsfx Abvew Front and rear air cushion tables, foldable Machine software WOODFLASH including: - CNC board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workstation license Dongle upgrade: 3D simulator with collision detection for WOODFLASH on the machine Workpiece release at the rear side of the machine Machine delivered without tools and HSK holders.