Hidravlični agregat 11 kW/1450 vrt/min

Flutec Battenfeld PT-350/4.0/M/ FL086-E

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, BATTENFELD HM 60/350 S Injection Moulding Machine Year of manufacture: 2008 Injection unit: - Screw diameter: 35 mm - Shot weight: 153.8 g - Injection pressure: 2083 bar - Injection volume: 169 ccm Clamping unit: - Clamping force: 60 t - Tie bar clearance: 370x320 mm - Maximum platen dimensions: 550x530 mm Ejector: hydraulic Clamping system: hydraulic Control unit: UNILOG B6 Additional equipment: - Machine in very good technical condition - Euromap 67 interface Tsdpfok Rnq Njx Anpsd Dimensions: - Weight: 3100 kg - Length/Width/Height: 3.79x1.24x1.88 m Power supply: - Pump/Motor: 15 kW - Heaters: 10.4 kW - Total: 25.4 kW

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 2007, Funkcionalnost: nefunkcionalno, For sale is an injection moulding machine from the brand Netstal, model Synergy 1000-230. After a transport accident, the control cabinet is completely defective; for this reason, the machine is being offered as a spare parts donor or for repair. The machine would otherwise be fully operational and in good condition. Technical data: Operating pressure: 210 bar Injection force: 182 kN Clamping force: 1000 kN Opening stroke: 0-400 mm Mould installation height: 450-750 mm Total weight: 7,200 kg Operating hours: approx. 53,000 Available from March 2024. Tedpforfbnmjx Anpod Initial hydraulic oil fillings can be ordered from us. Upon request and for an additional charge, loading and transport (Europe-wide) can be organised. Prices plus VAT. Inspection possible by appointment. Please contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or ways to contact us, please visit our website.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times Tedpjmhhypefx Anpjd - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: rabljeno, Komplet stisnjenega zraka z kompresorjem in tlačno posodo – vijačni kompresor KAESER SK26 (letnik 2005) – tlačna posoda Gebre GmbH z volumnom 750 l (letnik 1996), stoječa na treh nogah z manometrom. Stroj (dodatno): Kompresor s tlačno posodo; letnik 1996 – 2005 Tjdsw Tbtkspfx Anpjd Dobava zraka pribl.: 2,2 m3/h Maks. delovni nadtlak kompresorja: 10 bar Volumen tlačne posode: 750 l Maks. delovni nadtlak posode: 11 bar Moč: 15 kW Tok: 31 A Napetost: 400 V Frekvenca: 50 Hz Dolžina: 0,8 m Širina: 0,8 m Višina: 1,03 m Upravljanje/nadzor: nadzorna plošča na kompresorju Osnovna konstrukcija: posoda na 3 nogah Oprema: kompresor, tlačna posoda Teža: 290 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, moč: 9,8 kW (13,32 KM), vhodni tok: 16 A, notranja dolžina: 80 mm, notranja širina: 120 mm, notranja višina: 16 mm, skupna dolžina: 140 mm, skupna širina: 153 mm, skupna višina: 200 mm, skupna masa: 600 kg, Število komor: 4, vrsta aktuacije: električni, vrsta goriva: električni, Peč za večjo količino peciva Wiesheu EBO 128-S Ločeno reguliranje zgornje in spodnje grelne enote 4 nadstropja, višina posameznega nadstropja: 16,5 cm Peč je mobilna in ima sistem zaklepanja Tsdpjzylhwefx Anpsd Modularni konstrukcijski sistem Priključna napetost: 400 V, vtič 16A-CEE Dimenzije: 1530 x 1400 x 2167 mm (Š x G x V) Uporabljena peč

Leto izdelave: 2006, stanje: rabljeno, Injection unit Krauss Maffei Size 700 Tedpedl Sf Ssfx Anped complete with 50mm Ø screw cylinder, equipped with all valves and servomotor

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), For sale is an injection moulding machine from Krauss-Maffei, model 125-520 C2. The machine was operated in a facility that places great emphasis on cleanliness and maintenance. Year of manufacture: 2004 Pneumatic needle shut-off 2x hydraulic core pullers 83,000 operating hours Clamping force: 1,500 kN MC 4 control unit with colour monitor and integrated control panel 4 additional cylinders included: 1* D35 / 2* D40 / 1* D45 Prices are subject to VAT. Inspection possible by appointment. Please contact us; our team will be happy to assist you. Part exchange or trade-in possible! Tsdpfslkbhwjx Anpsd Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 2004, ALUP screw compressor type SCK 31-10/SON, 3.12 m³/min flow rate, 10 bar final pressure, 22.0 kW, with refrigerated dryer and air receiver. Todjwmwpiopfx Anpod

Stanje: zelo dobro (rabljeno), Battenfeld Calzoni hydraulic motor MR 4500 L Battenfeld Part No. 21640528 Tjdjfpa Injpfx Anpjd

Stanje: dober (rabljeno), Leto izdelave: 1993, Netstal 1750 /870 HP Schließkraft: 175 Tonnen Todpfjg U Arxox Anpjd Baujahr: 1993