Polpriklopnik z nizko nakladalno ploščadjoFliegl
SDS 390, Nachlaufgelenkt, 3x VORHANDEN!
Polpriklopnik z nizko nakladalno ploščadjo
Fliegl
SDS 390, Nachlaufgelenkt, 3x VORHANDEN!
Fiksna cena plus DDV
24.900 €
Stanje
Rabljeno
Lokacija
Bovenden 

Prikaži slike
Prikaži karto
Podatki o stroju
Cena in lokacija
Fiksna cena plus DDV
24.900 €
- Lokacija prodajalca:
- Alte Bundesstraße 48, 37120 Bovenden, Nemčija

Pokliči
Tehnične podrobnosti
- Lastna masa:
- 6.990 kg
- Največja dovoljena obremenitev:
- 28.010 kg
- Skupna masa:
- 35.000 kg
- Konfiguracija osi:
- 3 osi
- Prva registracija:
- 01/2021
- Naslednji pregled (TÜV):
- 09/2026
- Dolžina tovornega prostora:
- 10.000 mm
- Širina tovornega prostora:
- 2.500 mm
- Višina nakladalnega prostora:
- 1 mm
- Vzmetenje:
- zrak
- Velikost pnevmatike:
- 235/75R17.5
- Barva:
- bela
- Prevoženi kilometri:
- 1.001 km
- Vrsta prenosa:
- drugo
- Voznikova kabina:
- drugo
- Oprema:
- ABS
Podrobnosti ponudbe
- ID oglasa:
- A20750407
- Referenčna številka:
- 89057
- Posodobitev:
- nazadnje dne 18.03.2026
Opis
Vehicle location: Bovenden, 3 axles, air suspension, rear axle steered, ABS (anti-lock braking system), lashing eyes, underrun protection, supports, storage box
Body: 3 units available! Total length approx.: 13,800 mm
Maximum total width: 2,550 mm
Total height approx.: 2,488 mm
Gooseneck length approx.: 4,050 mm
Lowbed length approx.: 9,600 mm
Loaded deck height in lowbed approx.: 900 mm
Internal width approx.: 2,480 mm
Coupling height approx.: 1,150 mm
Kingpin installation dimension approx.: 1,680 mm
Ihodpfox Hkcijx Adkew
Front corner dimension approx.: 2,040 mm
Fine-grain steel welded construction, reinforced design, fifth wheel plate with replaceable 2" kingpin, slightly inclined outer frame with "Load-Lock profile" for attaching tie-down straps, 8 additional pairs of lashing eyes recessed into the outer frame, each rated at 5 tons, 1 detachable compensating block on the lowbed deck (3-part), top timber cross member at least 200 mm wide for height compensation; gooseneck adjustable to 3 positions with parking position at the crank; 4 pairs of stake pockets 83 x 83 mm recessed into the floor for inserting the compensating block; open storage compartment for insertable stakes located below the loading area; 13 pairs of stake pockets recessed into the outer frame with 70 x 40 mm internal dimensions (3 pairs on gooseneck and 10 pairs on lowbed); 3 rows of stake pockets recessed into the floor, each with 7 stake pockets, 70 x 40 mm internal dimension, 26 plug-in stakes B=80/T=50/L=1200 mm, hot-dip galvanized; hardwood floor approx. 30 mm thick, laid lengthwise, with omega profiles for high point load capacity in the wheel recess area, steel/chequer plate floor. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted.
Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.
Body: 3 units available! Total length approx.: 13,800 mm
Maximum total width: 2,550 mm
Total height approx.: 2,488 mm
Gooseneck length approx.: 4,050 mm
Lowbed length approx.: 9,600 mm
Loaded deck height in lowbed approx.: 900 mm
Internal width approx.: 2,480 mm
Coupling height approx.: 1,150 mm
Kingpin installation dimension approx.: 1,680 mm
Ihodpfox Hkcijx Adkew
Front corner dimension approx.: 2,040 mm
Fine-grain steel welded construction, reinforced design, fifth wheel plate with replaceable 2" kingpin, slightly inclined outer frame with "Load-Lock profile" for attaching tie-down straps, 8 additional pairs of lashing eyes recessed into the outer frame, each rated at 5 tons, 1 detachable compensating block on the lowbed deck (3-part), top timber cross member at least 200 mm wide for height compensation; gooseneck adjustable to 3 positions with parking position at the crank; 4 pairs of stake pockets 83 x 83 mm recessed into the floor for inserting the compensating block; open storage compartment for insertable stakes located below the loading area; 13 pairs of stake pockets recessed into the outer frame with 70 x 40 mm internal dimensions (3 pairs on gooseneck and 10 pairs on lowbed); 3 rows of stake pockets recessed into the floor, each with 7 stake pockets, 70 x 40 mm internal dimension, 26 plug-in stakes B=80/T=50/L=1200 mm, hot-dip galvanized; hardwood floor approx. 30 mm thick, laid lengthwise, with omega profiles for high point load capacity in the wheel recess area, steel/chequer plate floor. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted.
Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Registriran od: 2002
2.301 Oglasi na spletu
Pošlji povpraševanje
Telefon & Faks
+49 551 8... oglasi
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake


























