Sistem verižnega transporterja Transportni trak

FLEXLINK 12.5m Aluminium-Fördersysteme Kunststoffketten

Stanje: kot nova (razstavni stroj), For sale Demag wheel blocks Cedpfx Ageh Uqibeqogw ATTENTION! We have more than 15,000 Demag parts in stock For further information, please visit our website or see our other listings.

Stanje: rabljeno, Leto izdelave: 2023, Used installation Year of construction: 2023 Condition: as new, system has only a few operating hours Equipment and technical data: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and chips - Fan: 2 x 7.5 kW - Airflow: 10,000 m³/h - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs, each 2.50 m - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter load: 129 m³/(m²xh) - Filter cleaning: AL-KO OPTI JET® - Pressure relief area: 0.84 m² (bursting disks) - Base frame with discharge hopper and rotary valve; dry discharge system with C-coupling Consisting of: - ECO JET DUO 6 UPPER SECTION, 2 x 7.5 KW: Clean air filter unit; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; including pressure relief area and Dry discharge system with C-coupling; without filters and control system; including pressure transducers - ECO JET DUO 6 ZWR XL – 1100 MM: Extension ring for increasing height/expansion with 2 suction inlets for extraction stubs - Substructure with discharge hopper and built-in rotary valve 960/1 FG: For chip disposal via customer-provided transport fan into an existing silo or similar; Transport duct DN 200 mm, approx. 1,260 mm length under rotary valve; connection to customer’s transport duct Rotary valve certified according to ATEX directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor power: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class/construction: IP 54 / B3 Insulation class: F Speed: 41 rpm Throughput*: 15,744 l/h* No. of cells: 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pieces required Filter BIA Category ‘M’ – electrically conductive; 2.50 m length, incl. support cages; 77.6 m² filter area - Suction stub 400 mm: with non-return flap in rectangular duct - ECO JET non-return flap 910x346x500 mm - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency converter up to max. 37 kW; suitable power modules and controls as well as the frequency converter are included in the base unit; the frequency converter is installed in the control cabinet. Cgjdpfx Ajyk I U Ajgqew Cascade control with frequency converter handover: Fan 1 runs on the frequency converter; when the threshold value is reached, it switches to mains operation; fan 2 takes over the frequency converter and adjusts as required. Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault message Display of fault message in clear text on the display and collective fault lamp on the door Manual start of discharge via display button Start cleaning via differential pressure Manual cleaning start via button Post-cleaning Fire protection monitoring

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 7.950 h, Funkcionalnost: popolnoma funkcionalen, Vertikalni obdelovalni center / Vertikalni stružni stroj Proizvajalec: EMAG Model: VL6 (FANUC) Leto izdelave: 2021 Obratovalne ure: cca. 7950 Skupna teža: 10,5 t Glavno vreteno: 28,5 kW Moč pri 40/100 % ED: 41/28,5 kW Navor pri 40/100 % ED: 491/340 Nm Polna moč pri hitrosti vretena: 800 min⁻¹ Najv. število vrtljajev: 3100 min⁻¹ Premični enoti X, Z Pogonska enota revolverja za gnana orodja (C362) s centralno dovodom hladilne tekočine v orodje Najv. število vrtljajev: 9600 min⁻¹ Polna moč pri 3000 min⁻¹ Navor pri 100 % ED: 33 Nm / 10,4 kW Navor pri 40 % ED: 44 Nm / 13,8 kW Navor pri 10 % ED: 56 Nm / 17,6 kW Držalo za gnana orodja: 12 x BMT65 Skladišče in transportni sistem za obdelovance, transporter tipa O (GO 240") sistem nosilnih prizmov za 10 obdelovancev Višina obdelovanca: maks. 250 mm Teža obdelovanca: maks. 40 kg Set (10 kos) nosilnih prizmov za premer obdelovanca: 150–300 mm Zračno pihalo za obdelovanec in vpenjalno pripravo (Pick-Up) Cgodpfswzwu Isx Agqsw Dovod hladilne tekočine: 15 bar Zmogljivost črpalke: cca. 80 l/min pri 15 bar Hladilna enota (6,5 kW, voda-zrak) Dvostranski filter hladilne tekočine, ročno preklopljiv Filtrirna finost: 100 μm, z električnim in mehanskim indikatorjem kontaminacije Transporter odrezkov, verižni tip – odvod zadaj Izvedba s tečajnim trakom: odvod zadaj Višina izmeta odrezkov: 1.100 mm (z integriranim rezervoarjem za hladilno tekočino, kapaciteta cca. 500 l) Izvleček emulzijske meglice: zmogljivost cca. 800 m³/h Izpiralna pištola Merjenje obdelovanca s sondo Pihanje sonde Nadzor trajanja orodja (upravljanje nadomestnih orodij) 3-barvni signalni stolp Hitromenjalna vpenjalna glava SMW autoblok KCNS-N400-128 maks. = 3500 min⁻¹ Set trdih osnovnih čeljusti Set mehkih vršnih čeljusti Programska oprema Navodila za uporabo / Navodila za vzdrževanje

Leto izdelave: 2026, stanje: novo, Magnetic separator for chip conveyor line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Immediately available Cedpfx Agocqvhxsqjgw Location: Ex-stock 54634 Bitburg

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Sušilni sistem – model 1T 184 TPR (z mobilnim transportnim trakom). Ponujamo visokokakovosten sušilni sistem, ki je idealen za sušenje lesnih žagovin, pridelkov, reciklirnih odpadkov in surovin živilske industrije. Sušilni stroj je popolnoma nov, v originalni embalaži. Cgodpfxeua D U Io Agqsw

Leto izdelave: 2009, stanje: rabljeno, 1-stations zuigerflesmachine Pneumatisch aangedreven Doseervolume 15-785 ml Codpfof Rkydox Agqjgw Momenteel uitgerust voor 15-100 ml Verkocht in huidige staat of Aanpasbaar aan klantspecificaties

Stanje: pripravljen za uporabo (rabljen), Prodajam transportni trak, viden na fotografijah. Konstrukcija iz nerjavečega jekla. Vabljeni k stiku. Možnost prevoza. Codpfxew Alxde Agqegw

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Nova naprava MASS International Z-dvigalni transporter NDZ Kotne transportne tračnice / tekoči trak Kratkoročna dobava možna Primer kot na sliki: Višinsko nastavljiv kotni transporter z nastavljivimi koti NDZ 1 Dovajalni del: 600 mm Vzpenjalni del: 1300 mm Odpremni del: 500 mm Uporabna širina: 250 mm Zunanja širina: 305 mm (brez motorja) Višinsko nastavljiva izhodna višina: 700 - 1000 mm Nastavljivi koti za dovajalni in odpremni del Nastavljiv nagib PU trak Barva: črna L-kovi prečniki Razmak med prečkami: 500 mm Višina prečkov: 30 mm Hitrost traku: 3 m/min Standardno upravljanje z gumbom za zasilni izklop / zaustavitev Premično na vodljivih zapornih kolescih Troslojni lijakasti ščiti za dovajalni del Csdpfoiz S Htox Agqegw Navedena cena je za model NDZ1.

Stanje: novo, Load capacity: 30,000 kg Dead weight: 429 kg Dimensions: 2450 mm Height: 535 mm Width: 265 mm Maximum length: 4250 mm Extendable to (+ 800 JP): 6200 mm Extendable to (+ 2 x 800 JP): 8500 mm Warranty: 12 months Shackles: 4 + 4 pcs Extensions (1 set each, 4 pcs.): 800 JP Mounting beam for straps: 800 LKP Additional lifting eye: 800 LK Lifting eye for wide straps: 800 NKL Alignment plate: 800 TL Unwinder: 800 AR 7 Storage rack: 800 ST 2 Codpod R Hvyofx Agqegw XLift Lifting Beam – The Number 1 for All Applications Various trades and industrial sectors have different load handling requirements. Therefore, universal cross beams are, of course, available in different load ranges. Our offering extends from lifting beams with a load capacity of three tons up to lifting devices with a load capacity of up to 50 tons. The beams have the lowest possible dead weight without compromising stability and thus safety in use. Each model is easy to handle and, thanks to small hole spacings, can cover a wide range of hanging lengths. Universal lifting beams are particularly suitable for a wide variety of lifting tasks, as they can be used as beam lifting beams, spreader beams, or 4-point beams. The cross-shaped arrangement of the beams, which gives the traverses their name, also ensures that the vertical faces of the load are only minimally compressed. Adjusting the individual hole spacings is effortless, even for laypersons, making these beams outstandingly user-friendly. When used as an X-beam, a greater distance between the load and chains or slings is achieved under load. Additionally, you can acquire optional accessories perfectly matched to our XLift series, such as lifting gear.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 14.553 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ML0405-000122, izvrtina vretena: 51 mm, največja hitrost vretena: 6.000 obr/min, prehod palice: 51 mm, Premer palice (maks.): 51 mm, Oprema: dokumentacija / priročnik, Zraven stružnice se prodaja tudi podajalec TOP AUTOMAZIONI FU350SX, letnik 2020. Cena je za komplet. Cedpfeyym Smjx Agqogw