Kotni transportni trak, Z-transporter, višina 2.450 mm

Fimatech 1000005843, FB: 285 mm

Stanje: novo, Leto izdelave: 2024, Hacker knives 40 x 40 concave Djdpfx Aebxu Dheplokl Blades for Weima, Gross, etc. For almost all common chippers/shredders Available from stock in Bitburg Subject to prior sale

Stanje: dober (rabljeno), Leto izdelave: 2020, Rotor diameter 260 mm Feed opening approx. 800 x 1200 mm Rotor length approx. 800 mm Motor 18.5 kW Technical data available on request Required space approx. 2050 x 1550 mm Dodowzaizjpfx Apljkl All information provided without guarantee

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 7 kW (9,52 KM), premer žaginega lista: 305 mm, skupna dolžina: 3.100 mm, skupna širina: 3.100 mm, skupna masa: 3.000 kg, dolžina rezanja (maks.): 3.100 mm, višina reza z zareznim rezilom (max.): 70 mm, hitrost pomika os X: 40 m/min, hitrost podajanja os Z: 50 m/min, zahteva za prostor dolžina: 3.100 mm, potrebna širina: 3.100 mm, Oprema: dozator, vrtilna hitrost brezstopenjsko nastavljiva, Panel Dividing Saw SCHEER PA 4136 – 3100 x 3100 The PA 4136 is a powerful, electronically controlled panel dividing saw designed for precise, efficient, and automated cutting of wood-based panels. Ideally suited for industrial applications in joineries, furniture production, and panel processing. Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months CE-compliant and dust-tested (limit value < 2 mg/m³) Main Technical Data & Equipment: - Longitudinal cutting saw FM 20-3100 with hardened guides - Automatic forward and return movement of the saw unit (automatic lowering on return) - Feed drive via three-phase gear motor with frequency inverter control - Feed speed: 2 – 40 m/min (stepless) - Return speed (rapid traverse): 50 m/min - Extraction channels in machine base & pressure beam - Scoring saw adjustable from the outside (without opening the hood) - Safety hood locking with louver curtain SZ 5008 - 3-stage cutting height adjustment LA 4143 - 6 recesses in the pressure beam for residual cuts down to 5 mm - Main saw motor: 7.0 kW | Scoring saw motor: 1.1 kW (can be switched off) - Cutting length: 3100 mm | Cutting height: 70 mm Material Handling & Feed: - Angular pressure device WP 5003 with pressure claw for cross cuts - Adjustment range: 2400 mm - Fully automatic control via DNC-AT - Material feed table HP 5091 - 2 upper guides, rack and pinion guide - Servo drive for material pusher - Feed speed: 25 m/min (safety limited) - Return speed: 40 m/min - 6 clamp fingers, 4 double roller tracks - Table length: 3100 mm | Fence depth: 3150 mm - Closed phenolic (Pertinax) surface in the angular fence area Control & Operation: - Operating system: Ubuntu Linux - Integrated PC with hard drive, parallel & serial ports - Network capable (LAN/WLAN), remote servicing via Internet (TeamViewer, Remote Desktop) - USB print function - Multilingual dialog programming - 15" flat screen, multifunction keyboard at swiveling control panel - Graphical display of cutting plans and workflows Software / Programs: - OPTIMAX: Office optimization, offcut calculation, material requirements - OPTIMIN: Direct optimization at the machine PC with parts list entry - Processing via USB, diskette, or online (optional) - Manual, automatic & special operating modes (e.g., grooving, veneered parts) Additional Equipment: Dodpfx Aswrn Efsplokl - Angular fence table HP 5085: 1,720 x 800 mm | Phenolic top - Workpiece support table HP 5025: 1,720 x 800 mm | Phenolic top - Air cushion system LK 5030 integrated in both tables - Circular saw blade KSB 4005: Ø 305 mm, Z = 60 - Circular saw blade KSB 4006: Ø 200 mm, Z = 60, conical Reliability in Continuous Operation: This machine is in use worldwide — even under extreme conditions. Whether in Africa’s dry climate or the high humidity of Southeast Asia (e.g., Thailand), the PA 4136 delivers reliable operation in 3-shift systems — 365 days a year — and impresses with exceptional stability and durability. Guarantee: We are so convinced of the quality and durability of our machines that we offer a 7-year warranty on the machine structure and guideways. (Excludes electrical supplier parts and wear parts.) 📞 Contact us for an individual quotation or to schedule a viewing appointment. Machine available from stock. Delivery, commissioning, and training available as options.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 55 h, Machine with special rotor Available immediately Advantages: + special rotor, designed with reduced knife protrusion for processing both hard and soft materials + 22 kW motor + effective square knives *For pallets: up to a maximum of 10 pallets per hour (output depends on screen and material). Significantly higher throughput possible for smaller wood residue. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *interchangeable Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: Colour of the unit may vary Weight: 1,920 kg Standard equipment included: - Control cabinet with PLC controller - Automatic star/delta start - High-speed hydraulics - Automatic stop when rotor idles - 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing incremental control of the hydraulic pusher - Pertinax guides for hydraulic pusher Dodpfxex Af Rdj Aplekl - Vibration-damping machine feet - CE compliant The following options are available at extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled discharge conveyor (discharge height approx. 220 cm) + €12,980 net - Over-belt magnet + €5,980 net - Control for conveyor and over-belt magnet + €2,750 net (Start/stop synchronised with shredder) - Extended feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material feed must be free from metals and mineral contaminants. Damage to the tools and/or increased wear may result otherwise.

Stanje: dober (rabljeno), Leto izdelave: 1991, moč: 22 kW (29,91 KM), suitable for pallets or other residual material grab width = working width 98 cm 22 kW motor with discharge auger Dedpfx Apet Tvk Asljkl

Stanje: novo, Leto izdelave: 2025, Exhibition Machine Year of Construction: 2025 Features and Technical Data: - Base machine: DYNESTIC 7507 10.57 push - Upgrade from BetterNest rectangular nesting to: CAMPUS BetterNest freeform nesting software - Uninterruptible Power Supply (UPS) (ZB27) - Touchtool for tool length measurement Dsdjxc Rmkopfx Apljkl - 10.3 kW milling spindle - Drilling unit with 14 spindles - 1 additional processing area (Field A) at the rear with 1 stop, height 70 mm, pneumatically retractable - 2 electronically monitored lateral stops at the front Fields A + D in the X-direction for the front stop row (BF8) - 10-position tool changer 7873 - Tool changer 7872, single-position aggregate magazine pivotable in X and Y directions for Clamex aggregate - 2 x 140 m³/h and 1 x 250 m³/h vacuum pumps, dry-running, 400 V - 16-circuit vacuum system (VF16) - software controlled, incl. additional 25 meters of sealing cord - Laser pointer - red (single laser pointer) Field D (ZB8) for positioning vacuum cups or tracing the workpiece contour - Automatic central lubrication system - Vacuum cups for smooth table surfaces, complete 140x115 mm, height 30 mm with connection hose - Thin panel pusher as an addition to the standard pusher for special materials under 4 mm thickness and standard wood-based materials under 2 mm - Complete conveyor belt, pusher conveyor belt, pusher table - TouchLabel PRO – touchscreen and label printer mounted on stand - Production control computer NEXTEC 4.0 - Dust extraction hopper at the end of the pusher conveyor belt - Availability: by arrangement - Location: Flörsheim

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, Predmet moje dražbe je tračni transporter dolžine 1x3 m in širine traku 0,4 m. Možnost prevoza. Dodpfxot R R T To Aplokl

Stanje: novo, Leto izdelave: 2022, Shredding Machine 630 Dedpoku Abijfx Apljkl Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 30 concave pieces, multiple reversible Rotor diameter: 260 mm Rotor design: EcoRings Control system: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Screen perforation: 10 - 12 mm Extraction nozzle Ø 160 mm

Stanje: rabljeno, Leto izdelave: 2012, Used machine Year of manufacture: 2012 Dkedjw I U Ecspfx Aplel Base machine - Dynestic 7521 20.6 Dynestic table For classic nesting processing with wear plate Working length: 6250 mm (DYNESTIC 20.6 includes additional 4th stop in Y) Machine frame in welded construction with ground and hardened prism guides for the gantry, aggregate head, and consoles Gantry design for the moving column Helical rack-and-pinion drive in X and Y directions, ball screw drive in Z direction for precise positioning Technical data: Refer to the technical specifications for the DYNESTIC 7521 - 20.6. Please consult the relevant data sheets. Processing dimensions: Max. workpiece size for edge trimming: X = 6250 mm Y = 2100 mm Max. travel paths: X = 7360 mm Y = 2720 mm Z = 325 mm Max. bridge clearance, Dynestic table: Z = 1st level 318 mm / 2nd level 418 mm (from tabletop, without tool, without holder) Maximum programmable speed: Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage: 400 V, 50/60 Hz CONTROL SYSTEM: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network port 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for transmission of control and program data. Data transfer via high-speed internet connection Requirement: High-speed internet access at the machine. DYNESTIC Table Solid, continuous processing table with grid partitioning, continuous grooves in X and Y directions, groove spacing 50 mm with 25 meters of sealing cord for clamping the wear plate 1 processing field with stop rails/stops, height 30 mm, pneumatically retractable 2 stop rails in Y direction and 1 stop in X direction on the right (seen from the machine front) Vacuum zones Single-circuit vacuum system Drilling unit 7976, 24 spindles Drive power: 3.0 kW 18 vertical spindles, individually selectable, arranged in L-shape: 10 in X and 8 in Y direction 32 mm pitch Max. drill bit diameter: 35 mm Drill overall length: 70 mm from mounting end (depending on panel thickness) Spindle stroke: 70 mm Rotation direction: Alternating CW/CCW n(max.) 1000 - 5710 rpm steplessly adjustable Mount: M10 thread - 11 mm fit (no tool, no holder) 6 horizontal spindles 2 double-drilling spindles in X direction (32 mm distance between 1st and 2nd horizontal spindle) 1 double-drilling spindle in Y direction Mount: M10 thread, 11 mm fit Max. drill overall length: 70 mm from mounting end (no tool, no holder) Free space 1 for: Optional double drilling spindle in X direction or Vertical adapter with double feed power Free space 2 for: Optional saw in X direction or Vertical adapter with double feed power Milling unit 7831, 2-stage Power: 11.0 kW (S6) n(max.) = 1000 - 24000 rpm steplessly adjustable, two-stage feed stroke Max. power at 12000 - 24000 rpm air-cooled with HSK-F 63 tool holder with right-

Leto izdelave: 2022, stanje: novo, Discharge: 500 mm Incline conveyor: 1800 mm Feed: 600 mm (incl. hopper) Usable width: 250 mm Total width: 305 mm Cleat height: 30 mm Djdoh T T Tdjpfx Aplskl Angle adjustable Mobile