Valjčna brusilka

FERREL Giustina

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 2.500 mm, hitro pomikanje X-os: 35.000 m/min, hitri pomik os Y: 40.000 m/min, hitri pomik na osi Z: 40.000 m/min, skupna širina: 5.800 mm, skupna višina: 4.500 mm, skupna dolžina: 13.500 mm, dolžina mize: 10.000 mm, širina mize: 1.250 mm, Travelling column – high performance, precision, and metal removal capacity Linear RAM guide combined with HDS hydrostatic guidance ACD2 milling head with 5,000 rpm and 1,400 Nm torque Aitek ATC chain magazine with 60 positions, L = 400 and Ø 250, max. 35 kg Filtration with high-pressure coolant (IKZ) 15 bar Chip conveyor BLUM 3D touch probe Wide bed, linear guided in X-axis, traverse path W = 930 mm Rotary table drive prepared in control cabinet X-axis: 8,000 mm Y-axis: 1,300 mm Z-axis: 2,500 mm Table length: 10,000 mm Table width: 1,250 mm Spindle power: 40 kW Spindle speed: 5,000 rpm Tool holder: 40 ISO/Bt/Mk X-axis feed: 35,000 mm/min Y-axis feed: 40,000 mm/min Z-axis feed: 40,000 mm/min Psdpfoyr Dmdox Anporc Milling head auto-index: 0.001 x 0.001 degrees Operating hours: 3,800 h Length: 13,500 mm Width: 5,800 mm Height: 4,500 mm Weight: 45,000 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, no representation or contractual conditions are implied. We recommend verifying all critical details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7213, Manufacturing Origin: Switzerland Net Weight: approx. 2550 kg Customs Tariff: 8458.11 20 Dimensions: 2000x1260x1950 mm TECHNICAL SPECIFICATIONS 10-Axis Machine – Standard Version 10 axes, 6 spindles: Axes and Spindle Designation - 1 sliding headstock: Z1, S1 - 2 independent vertical gang tools: X1Y1, S6 – X2Y2, S2 - 1 combined unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent counter-operation rotating axis: X4, S5 Bar feed position: right side of operator Machine axis height: 1100 mm Main spindle stroke: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: - Guide bush machining: 180 mm - Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Prjdpfx Anow T Tcwspec Clamping collet, type: F20 (No. 76-201) Guide bush: fixed / rotating Guide bush collet, type: Meister 605 Number of lateral tool stations, combined: - Fixed: 2 x 5 - Rotating: 3 + 3 Number of frontal tool stations, combined: - Fixed: 4 - Rotating: 3 Number of rear tool stations, combined: - Fixed: 3 + 3 - Rotating: 3 + 3 Tool section: 12x12 mm Standard rotating tool holder: ESX 20 Bar feeder: yes Part catcher: yes All technical data is provided without guarantee and subject to change and/or errors.

Stanje: rabljeno, Pressure 160 t Passage width / mm Stroke / mm Working height 800 mm Total power requirement 15 kW Machine weight approx. 11.8 t - Table size: 1000x1000 mm Podpeiulkqefx Anpjrc - Distance between table and ram, large stroke at top, adjustment at top: 800 mm Additional information: Extendable table

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 4.000 t, Ковашки чук SMERAL тип KJH 4 Пневматично-хидравличен ковашки чук с обратно действие (counterblow hammer). Тегло на плъзгача (рам), кг: 1’800 Номинална енергия на удара, кгм: 4’000 Брой удари на плъзгача, 1/мин: 48 Ход на плъзгача, мм: 500 Площ за монтаж на матрицата, мм: 286 x 600 Pedjwbginspfx Anperc Минимална височина на матрицата, мм: 350 Мощност на главния двигател, kW: 45 Дължина на машината, мм: 3’100 Ширина на машината, мм: 1’900 Височина на машината, мм: 3’900 Тегло на машината, кг: 27’000

Leto izdelave: 1999, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in nearly new condition, equipped with a tool support system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Pulling force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Prjdpfsr A Hcbox Anpec Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by tool pan housing) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (excluding work area) Power supply: 400 V, 50 Hz Connected load: 9 kW Equipment: • Machine features electric control for the broaching movement with both manual and automatic operation • Integrated coolant and cutting fluid system • Tool support system for flat broaching tools (no feed mechanism) • Broaching slide with draw head mounting is equipped with flat guides on both sides Accessories: • 1 universal draw head for flat shanks from 3 mm up to max. 25 mm width and a maximum pulling force of 10 kN (10,000 kg) • Complete machine documentation, as well as CE declaration of conformity Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine's stable bed and the tool support system, it is particularly well suited for easy and fast use of flat broaching tools. The machine has seen very little use and is in like-new condition. The machine is available for inspection at our warehouse and is ready for demonstration under power. Our direct contact details, as well as further information about the machine, can be found in the attached PDF document.

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, HAAS VF-2SS | 4. os | Hladilno sredstvo skozi vreteno | 2014 Vertikalni CNC obdelovalni center HAAS VF-2SS, leto izdelave 2014. Stroj je opremljen s 4. osjo in hladilnim sredstvom skozi vreteno (TSC). Tehnične specifikacije: Gib X-osi: 762 mm Gib Y-osi: 406 mm Gib Z-osi: 508 mm Velikost mize: pribl. 914 × 356 mm Maks. nosilnost mize: pribl. 680 kg Hitrost vretena: 12.000 vrt/min Stožčastost vretena: CT/BT 40* Pogonski sistem vretena: neposreden pogon Menjalnik orodja: 24+1 položajev* Hitri premik X/Y/Z: do 35,6 m/min Podpfx Asz Dh Edsnpsrc CNC upravljanje: HAAS Hladilno sredstvo skozi vreteno (TSC) 4. os je vključena Nosilci orodja: niso vključeni Leto izdelave: 2014 Delovni čas: ni na voljo Predhodna uporaba: 2–3 izmene Oprema: 4. os Hladilno sredstvo skozi vreteno Visokohitrostna različica (Super Speed – SS) Avtomatski menjalnik orodja Sistem za hlajenje Pregled stroja je mogoč po predhodnem dogovoru.

Stanje: rabljeno, Leto izdelave: 1999, Pressure 180 t Podpfx Anoxab Erjporc Bending length 3100 mm Frame gap 2550 mm Throat depth 310 mm Stroke 200 mm Approach speed 80.0 mm/sec Working speed 10.0 mm/sec Return speed 58.0 mm/sec Installation height 385 mm Table width 240 mm Working height 885 / 1050 mm Oil capacity 180 ltr. Total power requirement 15.0 kW Machine weight approx. 9850 kg Dimensions L-W-H 4200 x 1750 x 2450 mm From a maintenance workshop Well-maintained condition (!!) - in inspected condition - machine video - ?v=o_t9BBMsNNs Equipment: - Simple, conventional electro-hydraulic press brake * with torsion bar for upper beam parallelism - Electric rear stop with ball screw spindles (X axis) * with 4x manually adjustable stop fingers * Fine adjustment via front handwheel, with analog position display - Electro-motorized adjustment of the depth of penetration (Y1+Y2 axis) * with digital position display - Pivotable control panel, mounted on left side - 1x set of upper tooling - 1x rotatable MULTI V universal die block 125x125 mm - 2x front / movable support arms - 1x freely movable two-hand/foot control - Operating manual (PDF)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Zasuk 806 mm, Zasuk nad prečno sani 527 mm, največji premer struženja 457 mm, 762 mm med konicami, 584 mm največja dolžina struženja, 0,01 stopinje C-os, 3000 rpm rezkanje 3,7 kW, +/- 50 mm Y-os, 76 mm premer palice, 22,4 kW motor vretena, 3400 rpm vreteno, 24 m/min hitri pomik, 24-postajni revolver, trak za odrezke, konjiček, nastavljalnik orodja, hlajenje, Psdpfxszg Efie Anporc

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 Prodpsyxr U Rjfx Anpjc MAIN SPINDLE - Spindle nose: A2-8 - Spindle drive power: 18.5 kW - Spindle speed: 4,000 rpm - Max. bar diameter: 80 mm - Max. machinable diameter: 366 mm - Minimum C-axis resolution: 0.001° TURRET - Number of positions: 12 - Number of driven positions: 12 - Travel X/Z: 280 x 785 mm - Travel Y: +/- 50 mm - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW TAILSTOCK - Tailstock type: Numeric - Taper type: MT5 - Distance between centers: 705 mm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 39 kVA MACHINE HOURS - Operating hours: 7,261 h WEIGHT AND DIMENSIONS - Required floor space: 3800 x 2143 mm - Machine height: 2,232 mm - Machine weight: 6,100 kg ACCESSORIES - Control: MORI MSX-850 III (Mitsubishi 720BM) - Tool measuring probe - 3-color status light - Coolant tank - Chip conveyor - 3-jaw chuck: hydraulic - Number of driven tool holders: 3

Leto izdelave: 1995, stanje: rabljeno, številka stroja/vozila: 18891, Tractive force: 10 t. Lift: 1000 mm 3 clearing stations With chip conveyor + platform for above-floor installation and safety door. Podpfx Anjbrcmkspjrc