Polpriklopnik z nizko nakladalno ploščadjo

FAYMONVILLE Multimax Satteltieflader (2+2) - nachlaufgelenkt

Stanje: novo, skupna masa: 48.000 kg, največja dovoljena obremenitev: 36.410 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. Extract from the specification. Complete specification available on request. Gooseneck * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long * Rear with chamfer approx. 1,000 mm x 10°. For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Plug-in steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX on the front connection rail with sockets * 3 kW electro-hydraulic power unit for hydraulic operations (except hydraulic winches) * External beams of the gooseneck with mounting holes for screwable lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * Approx. 40 mm thick hardwood covering over the gooseneck * 2-inch kingpin * Gooseneck guide plate for the fifth wheel, approx. 500 mm wide * Round NATO socket on front connection rail (Maeler & Kaege VG 96 917) * 1 pair of stake pockets recessed in the gooseneck for insertable stakes approx. 100 x 50 mm (inside the chassis beam) Loading Platform * Extendable loading platform, approx. 8,800 mm long with rear chamfer approx. 500 mm x 10° * Recess in the loading platform and in the chamfer for excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Continuous 50 mm thick hardwood covering on the loading platform (interrupted between axles) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Platform locking with conically welded locking profiles every approx. 250 mm * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed, outward-folding lashing rings in the outer frame (LC 10,000 daN) * 1 pair of permanently integrated wheel recesses in front of the axles, open up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * 1 pair of permanently integrated wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), located between the 1st and 2nd axle * Aluminium covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, usable as widening planks * Hardwood covering on the loading platform chamfer * Painted sand coating on the outer frame and chequer plates of the loading platform Chassis * BPW axles and suspension * 1st and 2nd axle rigid * 3rd axle self-steering * 3rd axle with electro-magnetic reverse lock via reverse gear and manual activation * Air suspension with lift and lower valve * 1st axle with traction aid * 2 axle load gauges mounted on the left side, including axle load diagram Tyres * 235/75 R 17.5 3PMSF twin tyres * TPMS tyre pressure monitoring system compliant with ECE R 141 Paintwork Dodpexc Axrofx Adhscn * 1 LED work light mounted left and right ahead of axles, wired to the tractor unit Loading Ramps * Hydraulic loading ramps DR-15/60-900-4350-HB-HV-M. Pair of two-part steel ramps, approx. 4,350 mm length, 900 mm width * Hardwood covering * Hydraulically foldable ramp tips * Ramps individually hydraulically adjustable approx. 235 mm outward and 215 mm inward * Hardwood covering on platform chamfer * Ramp with hardwood covering Brake System WABCO EBS-E according to EU regulations Lighting System * 24-volt lighting system * ASPÖCK-NORDIK full L

Stanje: rabljeno, skupna masa: 58.000 kg, največja dovoljena obremenitev: 45.830 kg, konfiguracija osi: 3 osi, prva registracija: 04/2024, naslednji pregled (TÜV): 04/2026, Leto izdelave: 2024, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Selection of features. Full specification available upon request. Gooseneck * In SNT design for optimized loading platform length * Length approx. 4,100 mm, front end with beveled edges approx. 400 x 400 mm * Rear with bevel approx. 1,000 mm x 10° * Front wall made of steel, removable, approx. 400 mm high * On the gooseneck a removable aluminum rear wall, approx. 400 mm high, anodized finish * 2 pairs of lashing rings (LC 16,000 daN) recessed on the inside of the gooseneck outer beams, rotated approx. 45° * 1 pair of lashing rings (LC 10,000 daN) embedded at the front inside the outer beams of the gooseneck, rotated approx. 45° * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm * 2 additional pairs of bolted lashing rings (LC 5,000 daN) * 2 pairs of lashing rings with retaining springs, suspended from the outer beams of the gooseneck (LC 5,000 daN) * On the gooseneck, 1 pair of removable aluminum side boards, approx. 1,200 mm long, approx. 400 mm high, anodized finish * 3.5-inch king pin Loading platform * Telescopic loading platform, length approx. 9,300 mm, with rear bevel approx. 500 mm x 10° * Recess in the bevel, extending into the platform to accommodate the excavator dipper stick approx. 2,490 x 750 x 210/290 mm (L x W x H) * Continuous hardwood flooring (approx. 50 mm thick) on the platform, interrupted between the axles (increases friction coefficient) * Platform locking with conically welded locking profiles approx. every 250 mm * Including pre-tensioning plate * 1 pair of recessed, flat lashing rings in the fixed front part of the platform (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the platform, foldable outward (LC 10,000 daN) * 5 pairs of stake pockets recessed into the outer frame of the loading platform, for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket rail mounted on the fixed support of the platform for plug-in stakes approx. 100 x 50 mm * Wheel recesses with square climbing strips approx. 15 x 15 mm * Wheel recesses before the axles, open all the way to the gooseneck cross member, approx. 1,310 x 700 x 410 mm (L x W x D) Dsdpsxcdm Dsfx Adhscn * Wheel recesses between the 2nd and 3rd axle approx. 1,310 x 700 x 250 mm (L x W x D) * Aluminum covers for the wheel recesses, which can also be used as bridging elements for the platform extension OR as extension planks * In front of and behind the rear wheel recess, each 1 pair of lashing rings (LC 10,000 daN) recessed in the outer frame of the platform * WADER container pockets in the loading platform and gooseneck for transporting 2x 20' containers * 1x over the gooseneck with long material support * 1x extension (galvanized) in the platform, extendable by approx. 230 mm per side * Extension planks, loose, steel-framed * 4 pairs of plug-in WADER container locks * Long material support in the low bed level with the gooseneck, required for transporting 2x 20' containers * 1 pair of aluminum drive-on ramps VFR 120, approx. 2,400 x 620 x 120 mm (L x W x H) Chassis * BPW axles and suspension * 1st and 2nd axles rigid * 3rd and 4th axles steerable with electromagnetically actuated reverse lock, activated via reverse gear and manually * Air suspension with lifting and lowering valve * Twin tires 235/75 R 17.5 3PMSF * 1st axle with automatic lift axle function Brake system WABCO EBS-E in accorda