Polpriklopnik z nizko nakladalno ploščadjo

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader 2tlg. Rampen

You can find our complete range of vehicles, including those available immediately and at short notice, on our website.

Excerpt from the equipment list. Full specification available on request.

Gooseneck:
* Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring, approx. 30 mm thick

Extendable loading platform:
* Extendable loading platform with rear chamfer approx. 500 mm x 8°
* 8 pairs of outward-folding lashing rings (LC 10,000 daN)
* 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN)
* Cutouts in the outer frame of the loading platform for attaching tensioning straps (LC 2,000 daN)
* Hardwood flooring, approx. 48 mm thick; checker plate flooring over the axles

Two-piece steel ramps:
* One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 900 mm, with Super Grip rubber coating
* Ramp with hydraulically folding and unfolding ramp sections
* Hydraulic lifting mechanism, hydraulically adjustable
* Maximum load per pair: 50,000 kg
* In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not need to be included in the overall vehicle length of 16,500 mm when in driving position

Axles:
* BPW axles and suspension, 1st axle with steering, 2nd and 3rd rigid, 4th and 5th axles trailing-steered, air suspension, with raise/lower function, drum brakes
* Trailing steering axles with electromagnetic reverse lock, activated via reverse gear or manually
* Technical axle load: 12,000 kg each

Tyres:
* Tyres 235/75 R 17.5 3PMSF – make of our choice

TPMS:
* TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck via standardized EBS interface according to ISO 11992. For correct display, the truck must be capable of receiving and displaying this data

Landing legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)

Brake system:
* Wabco brake system in compliance with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit

Steel structure:
* Steel structure made from high-tensile fine-grained steels
* Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa)

Electrical system:
* Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting
* All LED side marker lights flash with the indicator
* ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098

Paintwork:
* Complete steel structure automatically shot blasted after welding with a blast wheel system
* Second blasting treatment with corundum for optimum adhesion of the coating system
Njdpfsy Augwjx Agxela
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection
* Final paint finish with two coats of 2K topcoat, single color in RAL 3002 carmine red according to RAL system 841GL
* Rear section metallized and painted in RAL 9010 (pure white)

Including the following additional equipment:
* 2-inch king pin
* One galvanized steel front wall, approx. 400 mm high
* A spare wheel carrier in front of the front wall
* Yellow-red air couplings at the galvanized front connection strip
* A bracket for a rotating beacon at the rear of the trailer
* Galvanized supports under the chamfered section of the loading platform
* Super Grip 2 rubber coati

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.