Polpriklopnik z nizko nakladalno ploščadjo

FAYMONVILLE Gigamax Tiefbett 1+3

You can find our entire vehicle inventory, including vehicles available immediately and at short notice, on our website.

Excerpt from the equipment list. Complete specifications available on request.

Fjdpfx Ahewx Ddwj Dogh
GOOSENECK
* Gooseneck with integrated 1-axle running gear (pendulum axle) in a detachable design
* Gooseneck hydraulically adjustable in height, including hydraulic connection linked to the hydraulic axle compensation of the first axles
* Length: approx. 5,200 mm, with front taper approx. 60°
* For tractor units: 6 x 4 or 8 x 4
* Front bulkhead made of steel, detachable, approx. 400 mm high, tapered design
* 1 pair of mechanical supports at the front of the gooseneck, foldable (LC 10,000 daN)
* 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized version
* 1 plug-in aluminum rear board, approx. 400 mm high, anodized version
* Checker plate covering over the gooseneck
* 3.5 inch king pin
* Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917)
* 1 stainless steel toolbox with 1 lid, mounted on the right side in direction of travel near the aluminium board, approx. 1,350 x 400 x 400 mm (L x W x H)
* Hydraulic couplings from gooseneck to low bed with multi-coupling
* 1 LED work light left and right at the rear cross member of the gooseneck, wired to the connection panel for the tractor unit

LOADING AREA
* Low-bed with external beams, designed as a telescopic loading area in low construction with front extension, including fixed approx. 50 mm thick hardwood floor, length x width approx. 8,000 mm x 2,740 mm
* One locking position approx. every 1,000 mm on the extension
* Fixed drive-on wedges at the front of the loading area with climbing strips
* 1 lashing ring outside on the fixed drive-on wedges (LC 10,000 daN)
* 1 hanging lashing ring each left and right on the front crossmember (LC 10,000 daN)
* Lashing rings with retaining spring approx. every 1,200 – 1,300 mm on the inner beams of the low bed
* Lashing rings with retaining spring approx. every 1,200 – 1,300 mm on the outer beams of the low bed (LC 10,000 daN)
* Cut-outs above the lashing rings on the top chord of the outer beams
* Mechanical bolt-flange coupling from low bed to chassis, for exchanging the loading platform or adding extension beams, with electro-pneumatic-hydraulic couplings
* Outer beams of the low bed feature a painted-on sand layer as anti-slip protection
* 4 pairs of recessed lashing rings flush in the loading area, distributed along the outer frame/outer beams (LC 10,000 daN)
* 1 lashing ring outside each left and right on the rear crossmember (LC 10,000 daN)
* Folding extensions, approx. 230 mm per side
* Loose extension planks, framed in steel
* 6 pairs of threaded blocks between the lashing rings under the top chord of the outer beam, for mounting boltable rings M24 (LC 8,000 daN)
* 2 pairs of M24 bolt rings (LC 8,000 daN) included

REAR RUNNING GEAR
* Rear chassis with closed outer frame, checker plate covering and continuous prism excavator recess, approx. 1,450 x 900 x 505 mm, open at the rear

PENDULUM AXLE
* All axles are hydro-mechanically force-steered
* Hose burst valve on the axle compensation cylinders with automatic reset function
* Hydraulic cylinders with shut-off valves and safety pins for securing in raised position
* Final painting of axles with 2 coats of 2-component paint, single color in DB 7350 Nova Grey
* Hydraulic axle compensation
* Tyres 245/70 R 17.5 3PMSF
* Hanging bar for loose loading ramps at the

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.