Stroj za površinsko brušenje

FAVRETTO MB100

Stanje: rabljeno, Leto izdelave: 2011, Maximum grinding length: 1200 mm Maximum grinding length with table dresser: 1000 mm Maximum grinding width: 600 mm Grinding height (table to underside of grinding wheel): 550 mm Table load with magnetic chuck: 975 kg Table load without magnetic chuck: 1200 kg Table speed: 1 - 40 m/min Grinding Spindle Motor spindle: 11 kW Grinding wheel: 406 x 152.4 x 100 mm Speed: 1400 rpm Longitudinal axis (Z-axis) Rapid traverse: 5 m/min Adjustable feed: 1 - 50 mm Infinitely variable feed: 0 - 2000 mm/min Smallest infeed: 0.001 mm Vertical axis (Y-axis) Rapid traverse: 1.5 m/min Smallest infeed: 0.001 mm Required floor space (approx.): 4450 x 2935 x 2540 mm Total weight (approx.): 6700 kg Equipment: - Electropermanent magnetic chuck 1000 x 500 mm incl. electronic control module and potentiometer - Coolant filtration unit with paper filter and magnetic separator, 350 l tank, delivery rate 100 l/min - Static frequency converter incl. automatic dressing compensation - Complete extraction system Kdjdpfjxhdz Eex Af Aow - Siemens control with electronic handwheel - Various accessories, 2 flanges and 5 grinding wheels

Stanje: dober (rabljeno), Leto izdelave: 2008, dolžina brušenja: 1.250 mm, dolžina mize: 1.250 mm, obremenitev mize: 1.200 kg, širina mize: 500 mm, največja hitrost vretena: 2.600 obr/min, hitrost vretena (min.): 1.000 obr/min, skupna masa: 9.300 kg, potovalna razdalja osi X: 1.400 mm, pomik osi Y: 600 mm, pomik po osi Z: 600 mm, moč: 185 kW (251,53 KM), vhodna napetost: 400 V, potrebna višina: 2.870 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, X-axis: Grinding length 1,250 mm, travel 1,400 mm Y-axis: Distance table to spindle center 700 mm, travel 600 mm Z-axis: Grinding width see note, travel 600 mm Note: The grinding area in the cross direction (Z-axis) depends on the travel distance and the grinding wheel width. Example: Cross travel = 600 mm Grinding wheel width 60 mm = grinding width 660 mm Grinding wheel width 100 mm = grinding width 700 mm See images for more technical data Kdjdpfx Afou Hiq Rj Asw

Leto izdelave: 2014, Stanje: pripravljen za uporabo (rabljen), A defective ABA CNC precision surface and profile grinding machine is available. Grinding length: 2500 mm, grinding width: 1020 mm, cross traverse: 920 mm, intermittent cross feed: 750 mm/stroke, continuous cross feed: 5000 mm/min, table-to-spindle center distance: 1100 mm, magnetic table dimensions X/Y: 2500 mm/1000 mm, max. table load: 5000 kg, table speed: 60 m/min, spindle power: 26 kW, grinding wheel dimensions X/Y/Z: 500 mm/100 mm/203 mm, grinding wheel speed: 35 m/s. Machine dimensions X/Y/Z: approx. 8000 mm/4000 mm/3150 mm, weight: approx. 20,000 kg, control: Siemens Sinumerik 840 D-Solutionline, operating hours: approx. 1,000 h, cycle hours: approx. 400 h. Includes Hyfra sigma 13-S cooling unit, year of manufacture: 2014. The linear drive of the X-axis is defective and has been removed. Documentation available. An on-site inspection is possible. Ksdpfjwi Tpksx Af Aodw

Stanje: rabljeno, Leto izdelave: 1998, Grinding length: 800 mm Grinding width: 500 mm Workpiece height: 425 mm Kjdpfxjt Hxame Af Aodw Total power requirement: 15 kW Machine weight approx.: 4.5 t G E I B E L & H O T Z CNC cycle-controlled precision surface grinding machine Model: FS 850 GT SL Year of manufacture: 1998 # 101258 _____ Max. grinding length (table longitudinal travel 900 mm): 800 mm Max. grinding width (cross travel 500 mm): 500 mm Max. grinding height under wheel: approx. 425 mm Standard magnetic chuck size: 800 x 500 mm Max. table load: 1,100 kg Table speed: 2 – 28 m/min Intermittent cross movement: 3 – 60 mm/stroke Rapid traverse cross & vertical: 4,000 mm/min Grinding wheel size: 400 x 100 x 127 mm Grinding spindle drive approx.: 9 kW Total drive approx.: 22 kW - 400 V – 50 Hz Weight approx.: 4,500 kg Accessories / Special Equipment: • Easy-to-program GEIBEL & HOTZ grinding cycle control • Model SL with standard grinding programs including surface and multi-surface grinding with roughing, finishing, spark-out, return, plunge grinding, dressing automation with compensation, loading station stop – all inputs/parameters via operator panel and function keys • Electronic handwheel for 3 axes • Control based on SIEMENS electronics and SIEMENS OP 25 • Table movement via roller ring screw drive, allowing both very high and very low table speeds with constant torque and high efficiency • Cross and vertical axes driven by ball screw • Diamond dresser on the left side of the table next to the magnetic plate, with automatic dressing cycle, compensation, pull-back, and edge rounding on grinding wheels possible • MPM balancing device for grinding wheel • Mounted permanent electromagnet chuck approx. 800 x 500 mm, fine-pole • Wet grinding system with separate band filter coolant filtration • Complete enclosure with electrically monitored sliding doors • Separate control cabinet, work lamp, various accessories, operation manuals Condition: Good to very good! The wide grinding wheel is suitable for large-area stock removal! Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice

Stanje: dober (rabljeno), Leto izdelave: 1999, dolžina brušenja: 1.600 mm, širina brušenja: 600 mm, Blohm Planomat 616-CNC Working area: 1600 x 600 mm Year of manufacture: 1999 Equipment: - Siemens Sinumerik 810D - Grinding spindle with face contact - Grinding spindle drive via controlled three-phase motor with frequency converter (15 kW, 1000–3400 rpm) - Release of peripheral speed up to max. 60 m/s - Program for reading/writing/editing NC (main and sub) programs - Profile dressing unit PEA-TL200 with diamond profile rolls - Grinding wheel mount - Automatic balancing device - Paper band filter attachment - Cooling unit 3.8 kW - Electro-permanent magnetic clamping plate 1500 x 600 mm, with 18 mm holding force, cross pole division, and base frame - NC memory expansion by 256 kB Kdjdpfxevl H Rhj Af Asw - ECO grinding program for rough grinding using the oscillating plunge-cut method - Menu-guided surface grinding in 3 layers

Stanje: rabljeno, Leto izdelave: 2008, Premer kolesa - maks. 300 mm Modul - maks. 8 Kdjdevxww Sopfx Af Asw Modul - min. 0,7 Krmiljenje SINUMERIK 840 D Kot delnega stožca - min./maks. - 90 / + 90 ° Vreteno delovnega predmeta - izvrtina 127 mm Premer brusnega kolesa 50 - 230 mm Število vrtljajev brusnega vretena brezstopenjsko 7.500 U/min Število vrtljajev vretena obdelovanca 700 U/min Skupna potrebna moč 146 kW Teža stroja pribl. 21 t Prostorska zahteva pribl. 9,5 x 3,6 x 3,1 m Merilna sonda za zobno režo (integrirana v brusno glavo) Zunanja brusilna vretena - naprava za hlajenje Odsesavanje oljne megle ELBARON (integrirano v stroju) Filtrirni sistem hladilnega sredstva Hoffmann Uporabljalo se je za serijsko proizvodnjo spiralno zobatih krožnih zobnikov Brez vpenjalnih sredstev Brez brusnih koles / prirobnic za brusna kolesa Brez diamantnih rezil

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, obratovalne ure: 32.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 800 mm, pomik osi Y: 800 mm, pomik po osi Z: 800 mm, hitro pomikanje X-os: 60 m/min, hitri pomik os Y: 60 m/min, hitri pomik na osi Z: 60 m/min, hitrost pomika os X: 15 m/min, hitrost podajanja osi Y: 15 m/min, hitrost podajanja os Z: 15 m/min, vrtilni moment: 121 Nm, proizvajalec krmilnikov: Siemens, širina mize: 700 mm, dolžina mize: 900 mm, obremenitev mize: 1.400 kg, vrtljajska hitrost (min.): 20 obr/min, največja hitrost vrtenja: 18.000 obr/min, največja hitrost vretena: 18.000 obr/min, delovne ure vretena: 32.000 h, dovod hladilne tekočine: 40 letvica, nos vretena: HSK63A, število mest v zalogovniku orodij: 30, dolžina orodja: 350 mm, premer orodja: 100 mm, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, DMG MORI DMU 80P duoBlock Year of manufacture: 2006 Operating hours: 62,000 h Spindle hours: 31,000 h Function tested and cleaned Maintenance performed as per manufacturer's specifications Machine geometry within new-machine tolerance Equipment: 5 axes Swivel head (controlled B-axis) Direct path measurement in X/Y/Z (glass scales) Chip conveyor Kodpfx Afjw Ht Ibo Ajdw Extraction unit NC rotary table Tool magazine with 30 positions Heidenhain touch probe BLUM laser Handwheel Rotating sight window High-pressure coolant system 40 bar Chip flushing system Operating mode 4

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, višina središča: 525 mm, teža obdelovanca (maks.): 5.000 kg, dolžina brušenja: 4.000 mm, premer brusilnega koluta: 1.060 mm, Stroj je bil prenovljen (retrofit) v letu 2024. Krmiljenje Siemens Sinumerik 840D. Kdjdpfxsw Ngm Us Af Aow

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3806, dolžina brušenja: 600 mm, širina brušenja: 250 mm, premer brusilnega koluta: 250 mm, hitrost vretena za brušenje: 3.000 obr/min, moč: 3,5 kW (4,76 KM), Oprema: vrtilna hitrost brezstopenjsko nastavljiva, JUNG JF520 - workshop-refurbished Mechanically and electrically inspected and function-tested by our JUNG specialists Wearing parts replaced Geometry overhauled according to the JUNG new machine protocol - Grinding area: 600 x 250 mm - Stepper motor infeed - 3-axis HEIDENHAIN digital readout - Dressing dimension compensation - Magnetic force control - Automatic central lubrication - Used magnetic chuck - Used paper band filter 6 weeks parts warranty Kedpfx Ajwz Hf Nsf Ajdw Delivery time: short notice We are happy to accept your used JUNG grinding machine as a trade-in

Stanje: zelo dobro (rabljeno), Grinding length without magnetic chuck: 1500 mm Maximum grinding width: 750 mm Longitudinal travel (X axis): 1520 mm Cross travel (Y axis): 650 mm Kjdpjwlh Adjfx Af Asdw Vertical travel (Z axis): 690 mm Grinding wheel diameter: 406 x 100 mm Spindle speed: 1400 rpm Weight: 8600 kg Accessories: Braillon magnetic chuck 1000 x 500 mm Elcon 3 electronic control