Periferna naprava

FASI EV6

Stanje: novo, *Technical Standard Specification: Heater output: 9 kW Cooling capacity: 50 kW Medium: water up to 160°C Maximum external volume: 16 liters at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg HIGHLIGHTS / FEATURES: • Smart Controller Plus 7" touch screen / Industry 4.0 compatible • Flow measurement, configurable flow alarms • Return temperature display • Frequency inverter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector 20mA/TTY • Connection for external PT100 temperature sensor for measuring and displaying tool temperature • Continuous bypass of heat exchanger via 3-way valve to reduce deposits in heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Booster pump for unit filling at high temperatures • Filling via cooling water, switchable to separate filling • SSR for heating control • IP54 splash protection Visit our website for more details or for other performance classes. Hjdpjftm Hrsfx Aiqeu *This unit complies with European directives. Other directives and standards are only fulfilled if listed in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from standard will be stated in the quotation or order confirmation.

Stanje: dober (rabljeno), Leto izdelave: 2004, Peripheral devices Brand: Tool-Temp Model: TT-157E Hodeh Hbpwopfx Aiqeu Available: 14 units

Leto izdelave: 1981, stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Previous application: Production of TPE films up to 6 mm thick. Many other polymers can be processed. The line has been in operation until now and is available for inspection at any time in Nuremberg. The line consists of: Single-screw extruder Kuhne K45-24D Hedju Ttf Njpfx Aiqeu Screw diameter: 48 mm Process length: 24D Drive power: Heating power: 6.0 kW Net weight: 1,150 kg Flat die: Films up to max. 330 mm width Calender Gross roller width: 1,200 mm Net roller width: 1,100 mm (max. film width) Take-off unit and flying shears

Stanje: kot nova (razstavni stroj), PFAFF 8320 - 111/101 dolgo-ročna izvedba s mizo Hedexa D Hropfx Aiqju

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8153336470, skupna masa: 616 kg, volumenski pretok: 399 m³/h, tlak (min.): 4 letvica, tlak (maks.): 13 letvica, raven hrupa: 67 dB, vrsta hlajenja: zrak, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, hladilni sušilnik, We are a company specializing in compressed air technology for over 20 years. Our professional service level and high-quality, market-proven products guarantee a successful business relationship with you. We offer a NEW Atlas Copco GA37VSDs FF rotary screw compressor (variable speed with integrated dryer). The machine features a frequency inverter (VSD), engineered with the latest technology, resulting in increased efficiency and productivity: - On average, 20% lower specific energy consumption (SER) compared to previous GA VSD series models. - Environmentally friendly and efficient VSD+ variable speed drive reduces energy usage by up to 50% on average compared to fixed-speed idle models. - Independent of energy savings, there is up to 12% increase in FAD (Free Air Delivery) output. - High-efficiency fan motor (ERP 2015 compliant) reduces both energy consumption and noise levels. - Superior motor efficiency (iPM) up to 94.5%, exceeding IE3 efficiency standards. Engineered to work hard for your success. The market-leading GA series oil-injected rotary screw compressor delivers unmatched performance, high productivity and low maintenance costs—even in the toughest conditions. Technical specifications: - Output at 4 bar: 15.69-13.75 l/s / 0.94-7.85 m³/min - Output at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m³/min - Output at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m³/min - Maximum pressure: 10 bar (13 bar version available on request) - Voltage: 400 V - Motor: 37 kW - Noise level: 67 dB(A) - Weight: 616 kg - Internal permanent magnet motor (IPM) - Compression element - Direct drive - Innovative fan - Durable oil separator/filter - Electronic zero-loss condensate drain - Elektronikon controller - Inlet valve - VSDs module - Manufacturer code: 8153336470 Hsdpfxewlp Hdj Aiqju If you are unsure whether this unit is right for you or have not found a suitable compressor, CALL US! We will advise you on the right equipment selection. We invite you to explore our full range.

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity, hot circuit: 48 kW Heating capacity, cold circuit: 12 kW Cooling capacity, hot circuit: 42 kW Cooling capacity, cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 liters at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions (LxWxH): 1,395 x 753 x 1,180 mm Weight: approx. 580 kg *EQUIPMENT HIGHLIGHTS: - Control and operation via PLC with touch screen - Heating with stainless steel tubular heaters made of Incolloy - Heater control via solid-state relays - Control cabinet IP54, externally ventilated - Electrical wiring on terminal blocks - Volt-free input for signal to switch between heating/cooling (front door) - Volt-free contact for collective alarm via 3-pin connector (front door) - Temperature control unit with heating and cooling circuits, for connection to a valve station for rapid switching between hot and cold circuits - Temperature-controlled feed of return water - Level monitoring with automatic level compensation - Dirt filters in cooling water inlet and in return line of the circulation system - Separate automatic filling with strainer - Flow measurement using differential pressure principle in both circuits - Monitoring of heating element surface by temperature sensor - System pressure regulation, required compressed air connection: 6 to 8 bar - Pressure boosting pump type DS 360 for make-up water - Corrosion-resistant components (stainless steel, brass) - Unit mounted on castors and ready for connection Hodpsg Ey Ufofx Aiqou *OPTIONS: - EcoTemp system for intermittent operation - Connection for external temperature sensor PT100 or type J/K - Remote touch screen with 15 m cable Visit our website for more details or for alternative performance classes. *This unit is compliant with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are listed in quotations or order confirmations.

Stanje: novo, Novo naprava MASS International Kotast transportni trak / Transportni trak L - transportni trak s fiksnim kotom 35° Hodpfx Ajhm Axgsiqsu Hitra dobava MASS International Kotast transportni trak NC1 Transportni trak s fiksnim kotom in zajemnimi pločevinami v dovodnem delu Primer kot na sliki: NC 1 Dovodni del 600 mm Vzpenjalni del 1300 mm Uporabna širina 250 mm Zunanja širina 305 mm (brez motorja) Po višini nastavljiva izhodna višina 750 - 1050 mm Fiksni kot med dovodnim in vzpenjalnim delom Naklon nastavljiv Višina letvic 30 mm Razmak med letvicami 500 mm Hitrost traku 3 m/min Premično na vodljivih kolesih z zavoro Opcijsko: Druge dimenzije – glej standardni dobavni seznam Dimenzije po naročilu FDA skladen trak Spremenjena hitrost traku itd.

Leto izdelave: 2000, stanje: rabljeno, Used filterless suction conveying unit Hodpfx Aiodlpynsqju

Stanje: novo, Leto izdelave: 2026, Precizni stružnica s vodilno in vlečno vreteno Znamka: OPTIMUM Model: OPTiturn TZ 4 Art. št.: 3432240 Stanje: novo Višina konice: 200 mm Razdalja med konicama: 800 mm Št. vrtljajev: 45 - 1.800 min⁻¹ (16 stopenj) Serijska oprema: - 3-osni digitalni prikaz DPA 32 - fiksna centrirna konica MK 3 - hitromenjalni držalo za rezilo, velikost B - držalo za stružno rezilo BD - redukcijski tulec MK 6 / MK 3 - fiksna luneta ø 10 - 130 mm Hedpfx Ajgqw U Reiqsu - premična luneta ø 10 - 100 mm - hladilna naprava - izvlečna posoda za odrezke - LED strojna svetilka - orodje za upravljanje

Stanje: novo, *Technical Standard Specification:* Device type: 6/95 Heating capacity: 6 kW Cooling capacity: 45 kW Medium: Water up to 95°C Maximum external volume: 50 l at 95°C *Hydraulic Features:* - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water or manual filling (option) - Level monitoring via magnetic float switch - Dirt filter in the return line of circulation and cooling water inlet - Reversal circuit for leak-stop operation - Manual tool draining via leak-stop operation and activation of a vent valve on the rear of the unit - Filling time monitoring and aqua timer - Adjustable pump overrun - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow meters *Electrical Features:* - Control unit SBCmini, with relay for collective alarm, 230V, connection on the rear of the controller - Heating control SSR - Control cabinet IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A *General Features:* - Corrosion-resistant components (stainless steel, brass) - Heating via stainless steel tubular heating element made of Incolloy - Device mounted on castors, two of which are pivoting with brake - Additional temperature safety for secure shutdown of the heater on heater circuit breaker *Cooling:* Hjdpfxefnvvio Aiqeu Capacity: 45 kW (stainless steel plate heat exchanger) Cooling water connection: socket G3/8" internal thread (Performance data based on 80°C supply and 15°C cooling water temperature, as well as a pressure difference between cooling water inlet and outlet of 3 bar) *Pump:* Type: T401 Flow rate (max): 40 l/min Flow pressure (max): 3.8 bar Motor power: 0.5 kW Design: Submersible pump / Peripheral impeller *Dimensions/Weights/Colors:* Dimensions L/W/H: 514 mm x 238 mm x 493 mm (without connections) Weight: approx. 30 kg Color: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections:* Circulating medium: socket G1/2" Cooling water: socket G3/8" Filling (option) *This device is compliant with European directives. Other directives and standards are only considered fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are indicated in offers or order confirmations.*