Tračna žaga

FAS - Głowno PTS 600 CNC

Cutting range:
Lredpfx Aovf Icfogwsu
Diameter: 650 mm; axial cross-section: 800x650 mm
Main drive motor: 7.5 kW
Band drive assembly: gearbox – frequency inverter.

Machine body:
The construction is based on thick-walled, welded steel plates reinforced with steel profiles, ensuring high stability and durability of the base. Integrated oil and coolant tanks are housed within the frame. The receiving table at the working vise has dimensions of 800x500 mm.

Arm guidance:
Vertical columns are made from carefully selected profile steel. The arm runs on precision roller guides with pre-tensioning. Arm movement is driven by two mechanically linked ball screws via gearboxes and a servo motor. The machine features a hydraulic relief mechanism for the arm-holding screws to reduce load on the ball screw nuts, resulting in increased lifespan. Ball screw-driven arm feed provides precise control over feed speed, particularly at minimal cutting speeds, with feed parameters programmed from the control panel.

The machine is equipped with arm descent speed measurement, displayed on the control panel and integrated with bend control. Band guidance control (bend control) is linked to the arm feed drive; in case of band deviation, feed speed is automatically corrected, and returns to its original value once the deviation is resolved. If the deviation exceeds the set permissible value (bevel cut), the machine stops the cutting process and signals the problem visually (signal lamp).

Standard equipment:
- Cutting arm guided on roller guides
- Gearbox – frequency inverter
- Arm lifting and lowering driven by ball screws
- Hydraulic clamping of working and feeder vices
- Two-part vise gripping material before and after the saw band
- Bend Control
- Hydraulic band tensioner with elongation compensation
- Roller feeder table mounted on machine base, 1.5 m length
- Automatic feeder lead screw (single feed up to 1000 mm, available only with PLC and inverter)
- Adjustable clamping force for vices
- 1.5 m receiver roller table (output table)
- 3 m infeed table with powered rollers equipped with vertical rollers at entry/exit – operated from the machine control panel (with additional portable control panel at the roller conveyor)
- Laser cutting line
- Chip conveyor (right-hand discharge)
- PLC controller with LCD display; cutting band feed speed measurement (NC)
- Full CE-compliant safety guards
- Cooling system
- Saw band; technical documentation (DTR)

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.