Robot

Fanuc M-2iA/3SL

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, največja hitrost vretena: 6.000 obr/min, pomik po osi Z: 700 mm, moč vretenovega motorja: 32.000 W, proizvajalec krmilnikov: SIEMENS, model krmilnika: C200-sl, število osi: 5, This 5-axis Index C200 was manufactured in 2023 and offers advanced features for horizontal turning. This machine is ideal for precision and efficiency in metalworking, providing a significant upgrade for improving production quality. Take advantage of the opportunity to purchase this Index C200 horizontal lathe. Contact us for further information. Additional Equipment • Software options: OPC UA for host computer integration (up to 200 variables). ChipMaster cycle for chip breaking control. • Environmental data: Noise level: 73.8 dB(A) Machine Advantages Technical Advantages • Control system: Based on SINUMERIK 840D SolutionLine (SL) with SINAMICS S120 drives. 18.5" TFT color display with PCT touch (IP65). Siemens operating interface in German. • Interfaces: 4x USB 2.0 (2 on the control panel, 2 in the panel). Network enabled for NC data transfer (logical drives). • Safety: Siemens Safety Integrated (ProfiSafe). • Turret mechanics: Hydraulic locking, AC motor with spur gear. Drive power per tool carrier: 10 kW (25% duty cycle), max. 8,000 rpm. • Tool holder: Cylindrical shank D25x48 (DIN69880) with W-slots for higher repeat accuracy. Driven tools possible at every station (can only be rotated in working position). Redpfx Aeyyuvtogtet • Cooling unit: 13 kW for hydraulics, spindles and control cabinet. Connection for cooling water (20°C ±2°C, 30 l/min, 25% glycol). • Chip conveyor: Hinge belt conveyor (by KNOLL) with 180-liter container, discharge height 840 mm. Coolant system: 750-liter tank, 8-bar/20-80-bar pumps. • Interface for bar loader: UNIMAG4-compatible (external loaders require a special cover). Maximum bar length: 1,035 mm (short bar operation). Gantry loading device: Pneumatic gripper (Ø 10-90 mm, max. 3.5 kg). Conveyor belt with switch for finished parts/cut-offs. Additional Information Control Panel Operating voltage: 400V Control voltage: 24V DC Frequency: 50Hz Nominal output: 54kW Connected load: 65kVA Rated current: 94A Max. pre-fuse: 100A Main Drive Main and counter spindle Spindle head mount: OD 140mm, ID 85mm Front bearing diameter: 110 mm Max. torque (100%/40%): 125/170 Nm Min./max. clamping pressure: 8/80 bar Piston area pressure: 57 cm² Piston area tension: 57 cm² Max. clamping force: 45,600 N Max. traction force: 45,600 N C-Axis: Drive: Spindle hollow shaft motor; direct spindle angle measurement system Position deviation (VDI/DGQ 3441): Psmax = 0.01 degrees Turret Tool Carrier 1 X-axis travel: 110 mm X-axis rapid traverse: 30 m/min X-axis acceleration: 9 m/s² X-axis feed force: 5,000 N Z-axis travel: 320 mm Z-axis rapid traverse: 50 m/min Z-axis acceleration: 9 m/s² Z-axis feed force: 5,000 N Y-axis travel: 100 mm Y-axis rapid traverse: 15 m/min Y-axis acceleration: 9 m/s² Y-axis feed force: 5,000 N Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 2 X-axis travel: 110 mm X-axis rapid traverse: 30 m/min X-axis acceleration: 9 m/s² X-axis feed force: 5,000 N Z-axis travel: 550 mm Z-axis rapid traverse: 50 m/min Z-axis acceleration: 9 m/s² Z-axis feed force: 5,000 N Y-axis travel: 100 mm Y-axis rapid traverse: 15 m/min Y-axis acceleration: 9 m/s² Y-axis feed force: 5,000 N Stations: 14 with cylindrical shank holder D25x48 Tool Carrier 3

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Glavni pogon Število osi: 5 Rsdpfox D I Rpex Agtst Ta petosna stružno-rezkalna center Mazak INTEGREX I-150 je bil izdelan leta 2012. Razmislite o nakupu tega centra Mazak INTEGREX I-150. Za več informacij nas kontaktirajte. Vrste uporabe Struženje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 19.403 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 630 mm, pomik po osi Z: 510 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumerik 840D Solution Line, največja hitrost vretena: 17.500 obr/min, dovod hladilne tekočine: 70 letvica, nos vretena: HSK63, število vreten: 2, število mest v zalogovniku orodij: 144, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Precision machining center, Siemens Sinumerik 840 D Solution Line control unit, travel distances: X-axis 600 mm, Y-axis 630 mm, Z-axis 510 mm, 2 work spindles 1–17,500 rpm, drive system torque motor, equipment including: oil distributor for rotary table, pneumatic pressure intensifier, magazine extension for a total of 144 tool stations (2 x 72), clamping hydraulics base module, high-pressure pump 70 bar, emulsion mist extraction system, automatic loading door, air monitoring control, inductive tool breakage detection, hinged belt conveyor KNOLL 800 K-1/400, coolant filtration unit compact band filter KNOLL FKA 1200, and more. Rsdpfx Aowgh Hljgtst

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 07400000151, Axis: XYZCB (8 axes) Ø250 x 300 mm Bar Feeder: Ø65 Tooling: VDI30 / Tooth profile Control: SIEMENS 840D POWERLINE Rodpfx Agsttm N Njtst Dimensions: 2430 x 5600 x 2430 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, največja hitrost vretena: 5.000 obr/min, proizvajalec krmilnikov: SIEMENS, model krmilnika: DMG MORI SLIMline multi-touch, število mest v zalogovniku orodij: 42, This DMG MORI CLX 350 V3 was manufactured in 2023. It is a universal lathe equipped with driven tools and a C-axis. The machine features a hydraulic three-jaw chuck D210mm, a 12-position servo tool turret VDI 30 with 12 driven tool stations, and a hollow clamping device with a maximum bar capacity of D65mm. This is a great opportunity to purchase this DMG MORI CLX 350 V3 universal lathe. Contact us for further details about this machine. Additional equipment • Direct measuring system on X-axis • Chip tray • Hollow clamping device • Hydraulically operated tailstock via M-function • External electronic handwheel Redpfx Ajyyuv Tjgtst • DMG Mori IoT connector • Machine comes complete with tool holders, chuck, and jaws Additional information • Main spindle: A2-6 with AC motor • Hydraulic 3-jaw chuck diameter: 210 mm • Max. bar capacity: 65 mm • Driven tools and C-axis for advanced machining capabilities • 190 spindle hours Machine still under power

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC dvovreteni stružni stroj Gildemeister z Y-osjo. Prehod palice: 32 mm, orodjarna: 2x12, hitrost glavnega in kontra vretena: 8000 obr/min, krmiljenje: Siemens Sinumerik 840D Powerline, obratovalne ure: 39.426 h, ure vretena: 25.529 h. Vključuje KSS napravo, orodja in nalagalnik kratkih palic 1500 mm Iemca Vip 80E. Dokumentacija je na voljo. Ogled na lokaciji je možen. Približno na voljo od konca aprila 2026. Rjdpfx Agoygw Svjtjt

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Hidravlična stiskalnica MILLUTENSIL MIL 163 je bila izdelana leta 2018. Robustna hidravlična stiskalnica z delovno mizo velikosti 2000 mm krat 1200 mm, omogoča največjo obremenitev 5000 kg in razvije do 163 ton pritiska. Idealna za nastavljanje orodij, brizganje plastike in tlačno litje. Upravljanje je ročno ali polavtomatsko. Za več informacij nas kontaktirajte. Rjdpsx D Rliofx Agtet Vrste uporabe Upogibanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 38.407 h, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 300 mm, pomik po osi Z: 650 mm, moč vretenovega motorja: 26.000 W, skupna višina: 2.900 mm, skupna širina: 2.500 mm, skupna masa: 12.000 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840 Powerline, največja dolžina izdelka: 7.855 mm, število mest v zalogovniku orodij: 24, število osi: 3, This 9-axis Gildemeister TWIN 65 was manufactured in 2006. It offers a spindle power of 65 kVA and a maximum spindle speed of 5,000 rpm. The machine features a tool magazine with 24 tools and a turret tool changer. With a robust weight of 12,000 kg and dimensions of 7,855 mm x 2,500 mm x 2,900 mm, this horizontal lathe is equipped with special features such as a probing system and internal coolant supply. If you are in the market for a high-quality lathe, consider the Gildemeister TWIN 65 machine we are offering for sale. Contact us for further details. • Machine design: 60° slant bed • Guideways: Roller guideways • Maximum turning diameter: 250 mm • Maximum turning diameter (standard): 120 mm • Maximum turning length: 900 mm • X1-travel (upper slide): 300 mm • Z1-travel (upper slide): 650 mm • Y1-travel (optional): ±40 mm • X2-travel (lower slide): 180 mm • Z2-travel (lower slide): 650 mm • X3-travel (sub spindle): 175 mm • Z3-travel (sub spindle): 670 mm • Main spindle chuck size: 175 / 200 mm • Max bar diameter (without reduction tubes): 62 / 65 mm • Spindle bore diameter: 79 mm • Spindle nose diameter: 170 mm • Collet diameter: 66 mm • Front bearing diameter: 120 mm • Main spindle power (40/100% duty cycle): 35 / 25 kW • Main spindle speed range: up to 5,000 rpm • Main spindle torque (40/100% duty cycle): 370 / 270 Nm • Spindle drive type: AC motor with integrated spindle motor • C-axis: Integrated for oriented stopping and contouring • C-axis speed: 2,000 rpm • C-axis holding torque: 270 Nm • Sub spindle power (40/100% duty cycle): 26 / 21 kW • Sub spindle speed range: up to 5,000 rpm • Sub spindle torque (40/100% duty cycle): 290 / 230 Nm • C-axis speed (sub spindle): 2,000 rpm • C-axis holding torque (sub spindle): 230 Nm • Rapid traverse X/Z (slide 1): 30 / 30 m/min • Feed force X/Z (slide 1): 4.0 / 7.0 kN • Positioning resolution X/Z: 0.0005 mm • Motor torque X/Z: 6 / 10.5 Nm • Motor speed X/Z: 3,000 rpm • Ball screw pitch X/Z: 20x32 / 20x40 mm • Rapid traverse X/Y/Z (with Y-axis): 30 / 15 / 30 m/min Rjdpjyvz Ibofx Agtst • Feed force X/Y/Z: 4.0 / 4.0 / 7.0 kN • Positioning resolution X/Y/Z: 0.0005 mm • Motor torque X/Y/Z: 6 / 6 / 10.5 Nm • Motor speed X/Y/Z: 3,000 rpm • Ball screw pitch X/Y/Z: 20x32 / 10x32 / 20x40 mm • Rapid traverse X/Z (slide 2): 30 / 30 m/min • Feed force X/Z (slide 2): 4.0 / 7.0 kN • Positioning resolution X/Z (slide 2): 0.0005 mm • Motor torque X/Z (slide 2): 6 / 10.5 Nm • Motor speed X/Z (slide 2): 3,000 rpm • Ball screw pitch X/Z (slide 2): 20x32 / 20x40 mm • Rapid traverse X/Z (sub spindle slide): 15 / 30 m/min • Feed force X/Z (sub spindle slide): 4.0 / 7.0 kN • Positioning resolution X/Z (sub spindle): 0.0005 mm • Motor torque X/Z (sub spindle): 10.5 / 10.5 Nm • Motor speed X/Z (sub spindle): 3,000 rpm • Ball screw pitch X/Z (sub spindle): 10x32 / 20x40 mm • Number of tool stations: 12 • Tool holder: VDI 30 • Tool changer type: Turret head • Tool shank size (DIN 69880): 30 / 40 mm • Number of driven tool stations: 12 • Driven tools: All 12 stations are suitable for driven tools • Driven tool power (40/100% duty cycle): 11.7 / 8.4 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Distance between uprights: 1,870 mm Installation height: 1,400 mm Table length: 1,600 mm Length: 3,400 mm Width: 3,400 mm Rjdpfxswyuqkj Agtjt Height: 3,500 mm Weight: 19,000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, največja hitrost vretena: 7.000 obr/min, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840 D, število osi: 7, This 7-axis Gildemeister Twin 41 horizontal lathe was manufactured in 2006. It is ideal for precise and complex turning operations, offering robust performance and reliability. Take advantage of the opportunity to purchase this Gildemeister Twin 41 horizontal lathe. Contact us for more information. Additional Equipment • Double-spindle version Rodsx D Saujpfx Agtjt • Y-axis • Main and counter spindle • Collet chuck • 1 axial live tool • 1 radial live tool • Belt filter system • FMB Turbo 10-72 XT bar feeder Machine Benefits Technical Machine Advantages • Turning diameter: 145 mm • Chuck diameter (spindle 1 + 2): 140 mm • Longitudinal travels z1, z2, z3: 320 mm, 345 mm, 380 mm • Vertical slide travel y1: +/- 30 mm • Spindle longitudinal travel z3: 380 mm • Tool stations: 12, all stations live • Shank diameter: 25 mm • Speed of live tools: 6000 rpm • C-axis: 2000 rpm • Inclination: 0.001° Additional Information Machine still under power