Prehodna stiskalnica za vrata ali pakete

FAMAD HPPA

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Holtec paketna kapna žaga Vario Cut z Holtec mehanizacijo. Jörg Elektronik. Popolna odstranitev pod kapno napravo. Ihedpfx Asw Smz Dsf Tet

Stanje: dober (rabljeno), Multiblade Saw Gabbiani SA 300 – Made in Italy TECHNICAL SPECIFICATIONS: cutting width: 300 mm Ihsdpfehcwrkox Af Tst motor power: 40 kW cutting height: 100 mm feed speed steplessly adjustable feed speed range: 8-56 m/min disc diameter: 300 mm spindle diameter: 50 mm sleeve diameter: 70 mm 3 top pressure rollers minimum material length: 700 mm table dimensions: 1750 x 700 mm three rows of kickback pawls height from base: 740 mm extraction port diameter: 2 x 150 mm overall dimensions (L/W/H): 270 / 170 / 160 cm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, automatic wide belt sander with 2 belts for lacquers, wood, veneer, composites, and various materials Machine can be integrated into a production line Technical specifications: Working width: 1350 mm Maximum usable height: 130 mm Belt size: 2450 x 1350 mm Configuration: 1st Group: Sanding roller diameter 320 mm - grit 60 - blower cleaning belts - 11 kW motor with variator 2nd Group: Sanding roller diameter 320 mm - grit 40 - blower cleaning belts - 11 kW motor with variator Scotch Brite - 1.5 kW motor Vacuum table Belt speed variator: 4–19 m/min Ihsdpfx Afegmbu Ij Tet Operating pressure: 7 bar External dimensions: Machine: 2000 x 2750 x 2200 mm Vacuum pump: 800 x 700 x 900 h mm

Stanje: rabljeno, A.COSTA LEOPARD večlistna krožna žaga z dvojnim vretenom - Največja globina reza: 200 mm - Širina podajalne mize: 350 mm Isdpfx Asvf Dagjf Toht - 2 x 55 kW / 75 KM - Teža: približno 5 ton

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: KME 2/750L, Clamping carriage for saw frame Inspection possible by appointment. Ihsdpfx Afev Umb Eo Tjt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Double-edger and trimming circular saw with electronic control, comprising: RET straightening and feed table. Chain bed in front of the machine with a liftable and lowerable pressure roller. Laser unit. DK 90 L 1000: Passage width 1000 mm. Cutting height 125 mm. Feed speed frequency-controlled up to 100 m/min. Automatic roller height adjustment with roller pressure. Ihjdpfx Aswn D Izef Tst Width adjustment is hydraulic, with electronic positioning control offering the following setting options: stepless, 1 cm indexing, and switchable to 2 cm indexing. Cutting width between the flanges 24 - 440 mm. 10 variable preset dimensions, direct input of dimensions in mm. Constant dimension allowance, shrinkage allowance in percent. Splitter wedge pair: 1 x at zero line, 1 x hydraulically adjustable separately, with electronic positioning control. Splitter wedge opening 48 - 600 mm. Chain bed on the outfeed side. Motor 90 kW with power belt drive. Hydraulic unit. Chip separator ASV DK II with 2 separating lamellae. Electric switch cabinet with power section and PLC control. Operator console. Slat sleeve, clamping length 403 mm. Adjustment and zeroing sleeve. Professionally dismantled and loaded free on truck.

Stanje: dober (rabljeno), Leto izdelave: 1996, Weinig Unimat 23 Four-Sided Planer – Manufactured in Germany – Ribbed table – Year of manufacture: 1996 – Feed rollers embedded in the table TECHNICAL SPECIFICATIONS: Iodpfjh Dwl Djx Af Teht planing width: 230 mm planing height: 160 mm ribbed table spindle diameter: 40 mm 1st bottom spindle: 7.5 kW 2nd right spindle: 7.5 kW 3rd left spindle: 7.5 kW 4th top spindle: 11 kW 5th bottom spindle: 7.5 kW infinitely adjustable feed speed: 6–36 m/min feed motor power: 5.5 kW six driven top steel rollers two driven top rubber rollers three feed rollers in the table pneumatic feed pressure pneumatic shoe pressure spindles with brakes length of infeed table: 1970 mm electric height adjustment central lubrication (divided) diameter of dust extraction outlets: 140 mm machine dimensions (L/W/H): 410 / 200 / 180 cm weight: approx. 3000 kg

Stanje: novo, Leto izdelave: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical Features of the Saw Unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400V/50 Hz TCT blade diameter: 500 mm, bore: 30 mm, teeth: 144, thickness: 4.6 mm Cutting cycle speed: 4 seconds Technical Features of the Feed System: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for package weight up to 80 kg Maximum speed of feed system: 90 m/min Pneumatic raising of the pusher at the end of the cutting cycle with overhead return Data Input Management: 12-inch TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port Linux operating system Load and save machine parameters via USB port Edit and enter cut cycles (patterns) directly on the controller Upload cut lists created on PC via USB or Ethernet port Ihjdpfx Afshw Ng Ij Tot Operating Software: Manual input of stock length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1000 cut lists with 11 sizes each or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization Piece length measurement via photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: complete optimization with knot and defect elimination (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: "OPTI PLUS" package: for removing knots and defects Photocell for reading knots and defects for timber mapping Marking with fluorescent chalks/crayons (Note – only orderable in combination with ZA250) Pneumatic side clamping unit

Stanje: zelo dobro (rabljeno), Coating and packaging line with thermoregulated film, consisting of: a) Double conveyor belt (3000 mm x 1100 mm) for the application of edge protection devices. - Adjustable feed speed from 3 to 15 m/min. b) Stretch wrapping machine Mod. Compact 250/6R with motorized conveyor belt - Total machine length (with motorized belt) approx. 7600 mm - Reel holders (6 upper reels max. width 2450 mm + 6 lower reels max. width 1450 mm) - Cutting and cross-sealing unit (2500 mm) - Maximum usable height 700 mm - Installed power 12 kW - With automatic device for packaging lightweight components (from 1 to 5 kg) using sealing bar c) Thermal shrink tunnel Ijdsgp Diaepfx Af Tsht - Total length approx. 4700 mm (of which approx. 3700 mm tunnel section) with hot air circulation (heating by electric resistors and fan), installed total power kW ? - Conveyor with metal slats (approx. 1500 mm width) - Maximum usable height 700 mm - Adjustable feed speed from approximately 4 to 20 m/min d) "ELME" outfeed roller conveyor (idle rollers) for cooling (from approx. 3000 x 1500 mm)

Stanje: novo, Leto izdelave: 2026, Completamente automática para el corte de perfiles de aluminio medianos y grandes con automatización de fácil uso. Coloque cualquier perfil de aluminio; la máquina lo detectará automáticamente y procederá a cortarlo según los trabajos asignados, utilizando un posicionamiento de material de alta precisión mediante servomotor. Entrada de listas de corte Excel vía WIFI para facilitar la carga de grandes listados de cortes. Para cada perfil de aluminio que coloque para cortar, independientemente de la longitud, un sensor láser mide su tamaño. Nuestro potente algoritmo de optimización calcula al instante el mejor orden de corte para minimizar el desperdicio. La máquina corta automáticamente la lista calculada sin detenerse. No requiere ninguna intervención del operador, simplemente continúe cargando nuevas barras de aluminio. Alternativa sencilla y de alta velocidad a las sierras de doble cabezal. Solo ingrese (o importe) las longitudes y ángulos necesarios y presione GO. La máquina produce de forma continua sus piezas anguladas, con precisión y a gran velocidad. • Operación de corte totalmente automática con alimentación de barras y corte a medida. • Interfaz de usuario sencilla para operación automática: ingrese el trabajo y corte en segundos. • Corte simplificado de piezas, lotes o grandes listados de trabajos en Excel. • Corte y conteo de paquetes de barras/multibarra. • Entrada remota vía WIFI de listas de trabajos Excel con amplias capacidades de mapeo de datos. • Velocidades de corte de sierra y avance de barra ajustables para máxima productividad. • Modo de optimización automática con medición láser de longitud de barra y optimización para mínimo desperdicio (opcional). • Impresión automática de etiquetas para piezas utilizando datos de la lista de trabajos (aplicación manual de etiquetas, opcional). • Impresión en línea directa sobre el material sin acción del operador (opcional). • Impresión o escaneo de códigos de barras o QR para ingreso de trabajos (opcional). • Posicionamiento automático por servomotor del ángulo de inglete de la sierra hasta ±75° (opcional). Alta idoneidad para: • Fabricación de ventanas y puertas • Fabricación de estructuras de aluminio ingleteadas • Fabricación de estructuras de aluminio fabricado • Fabricación de composites • Fabricación de persianas, estores y mobiliario • Comercio minorista de aluminio Ihsdpfx Afef Eknne Tet Modelo: A550 Longitud: 9 m Unidad lineal: ProfiStop Alpha Longitud de material: 8580 mm Capacidad de empuje: 20 - 40 kg Software: Optimizador MAQUINARIA DE CALIDAD FABRICADA EN AUSTRALIA.