Linija za pakiranje in paletizacijo

F.lli Sacchi Linea insacco e pallettizzazione “Smart

The system consists of:
 A platform on which the vibrated support base for the bin is placed; this platform is protected by perimeter railings and is accessed via a marine ladder;
 Empty bag storage; empty bags are loaded manually by the operator. The exact position of the bags is set by adjustable side guides; a sensor located under the stack signals when the pile is depleted;
 On the empty bag magazine structure, pneumatic cylinders are installed which pick up the bag, open its mouth, and insert it onto the product dosing spout. The bags are picked up using a series of suction cups. The pneumatic control panel QP1 is also located on the magazine’s support frame.
 The dosing spout is supported by three load cells; a bucket flap operated by two pneumatic cylinders is installed at the outlet. Alongside, two other cylinders are positioned each with a hook at the end to tension the bag mouth.
 The bag is clamped along its longer side by two jaws which lock the bag after filling and guide it to the sewing machine. Movement is achieved through gearmotor units and wheels sliding on chrome-plated rods. During this phase, the bag rests on a motorized conveyor belt which transfers it; the belt is also raised by a pneumatic cylinder to allow the bag to settle gently after filling. The height of this belt can be manually adjusted using a handwheel that acts on four jacks, in order to accommodate different bag types.
 Once the bag is fed into the sewing machine, stitching and thread cutting take place; with the bag still on the belt, it reaches the turnover station, where it is clamped by two jaws, rotated 90°, and finally released to be parallel with the belt.
 The following conveyor comprises, at the beginning, a series of square rollers to flatten the bag, followed by a belt for transfer;
 At the end, there is a roller conveyor where the bag is picked up by the robot; this belt is stopped by a photocell when the bag reaches the end of the conveyor;
 The robot gripper is a comb type and is equipped with a translational cylinder for bag discharge and two cylinders that actuate a plate to hold the bag during movement before discharge.
 The system features two boxes housing the solenoid valves and vacuum groups;
Ppjdpjxrcc Ajfx Aczsl
 An electrical control panel manages the entire system, onto which the operator panel and weighing module are installed;
 The robot is managed by its own control panel with a dedicated operator interface;

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.