Hidravlična stiskalnica

EXNER H4SP 150 F

Stanje: rabljeno, Leto izdelave: 1971, Pressure: 200 t Clear width: N/A mm Stroke: 180 mm Table length: 690 mm Table width: 530 mm Distance between uprights: 420 mm Total power requirement: 18 kW Machine weight approx.: t Space requirement approx.: m E X N E R Hydraulic four-column press for embossing, coining, backward extrusion, calibrating, and punching (medals) Type: H4SP 200 # 1101-20 Year of manufacture: 1971, but has been overhauled several times since then _____ Press force downward: approx. 200 t Return force upward: approx. 20 t Usable table size: 420 x 220 mm Total table size: 700 x 530 mm Distance between columns (front): 420 mm Side distance: 220 mm Die height (table to ram, top): 380 mm Ram stroke: approx. 200 mm Piston/column diameter: 270/120 mm Piston bore: 50 mm Closing speed (ram): Nodpfx Aet Hw Dwokqjda — Rapid traverse/load traverse/ram down: 330/10/180 mm/sec Total power requirement: approx. 15 kW — 380 V — 50 Hz Weight: approx. 3,000 kg Machine dimensions (L x W x H): approx. 1.4 x 1.3 x 2.75 m Accessories / Special Equipment - Hydraulic ejector in table with separate pressure regulation - Electric selector switch for continuous stroke/foot release/manual engagement/setup - Large pressure gauge and control lamps to indicate pressure achieved/depth achieved - Press stroke and rapid traverse are set via a switching linkage with limit switches on either side of the press piston - Pressure is controlled via a fine-adjustment pressure valve - Reversal from pressing stroke to return stroke via pressure switch or limit cam - Control cabinet and hydraulic unit, all compactly attached and easily accessible - Previously equipped with automation, but only various pneumatic lines and valves remain

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja za olje: 220 l, pritisk: 300 letvica, ID43737 Bouwjaar: 1991-1997 Persmachines met een capaciteit van 60 tot 80 ton Merk: Hydro-Presses 2 stuks met 60 ton perskracht, type PH600 Slaglengte hydraulische cilinder: 600 mm Maximale kracht hydraulische cilinder: 60 ton bij 300 bar 5 stuks met 80 ton perskracht, type PH800 Ndodpfx Ajwhcmpokqea Slaglengte hydraulische cilinder: 600 mm Maximale kracht hydraulische cilinder: 80 ton bij 300 bar

Stanje: rabljeno, System: Chamber filter press, used Type: Passavant Application: Sludge dewatering Design: Overhead beam Year of manufacture: 1972 Filter plate size: 1200x1200 mm Number of plates: 59 plus head and end plate Filter plates: Polypropylene (PP) Filter cloths: optionally available, tailored to the medium Filtration area: approx. 270 m² Press volume: approx. 1700 dm³ Filtration pressure: approx. 15 bar Pump technology: optional Ndodpfjwqyf Iex Akqja Purchase or rental: Inspection of the equipment on site at our facility can be arranged by appointment.

Stanje: novo, Leto izdelave: 2025, stiskalna sila: 150 t, hod: 600 mm, širina mize: 800 mm, dolžina mize: 800 mm, razmak između stupova: 800 mm, obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, CRONOSSTECH 150/50 TON FOUR-POST HYDRAULIC DEEP DRAWING PRESS Nodpfxex N Ul Te Akqsda General Description The CRONOSSTECH 150/50 ton four-post hydraulic deep drawing press is an industrial solution designed for metal forming, deep drawing, and precision pressing applications. It features a robust four-post rigid frame structure for enhanced stability and precision. Its St52-grade steel frame undergoes stress relief via vibration technology to maintain high parallelism and perpendicularity tolerances over extended operations. Ram and cushion systems operate independently, with precise stroke and pressure adjustments managed via a touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 efficiency class motors and PLC-based control, the press provides high efficiency, reliability, and long service life. An automatic lubrication system and electronic filter contamination alerts minimize maintenance requirements. With a 150/50 ton capacity, this model is ideal for mass production, die test runs, and medium to high tonnage deep drawing operations. Key Advantages - Rigid four-post frame structure - Independent stroke and tonnage adjustment for ram and cushion - Complete control via touchscreen interface - High accuracy and repeatability - Low maintenance costs and long operational life Applications - Metal forming operations - Deep drawing applications - Die testing and production processes - Auxiliary pressing operations ⚙️ STANDARD & TECHNICAL SPECIFICATIONS TYPE: Four-Post FRAME MATERIAL: St52 – ERDEMIR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 units, induction-hardened and chrome-plated SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 150 Ton CAPACITY (CUSHION): 50 Ton DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m RAM STROKE: 600 mm CUSHION STROKE: 200 mm MIN. DIE OPENING HEIGHT: 100 mm MAX. DIE OPENING HEIGHT: 700 mm WELDING STRESS RELIEF: Vibration method WELDING APPLICATION: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. WORKING PRESSURE: 250 Bar TOTAL MOTOR POWER: 18.5 kW – IE3 MAIN PUMP: 36 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DOWN SPEED: 150 mm/s MOVABLE TABLE DRAWING SPEED: 12 mm/s MOVABLE TABLE RETURN SPEED: 170 mm/s CUSHION ADVANCE SPEED: 30 mm/s MAIN CYLINDER BORE: Ø 280 mm – Ck45 CUSHION CYLINDER BORE: Ø 160 mm – Ck45 AUXILIARY ACCELERATION CYLINDERS: 2 units APPROX. MACHINE HEIGHT: 3800 mm APPROX. MACHINE WIDTH: 1150 mm APPROX. MACHINE DEPTH: 1150 mm BED HEIGHT FROM FLOOR: 1200 mm PRE-FILL VALVE: NG 125 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable from the panel) RAM/CUSHION STROKE & TONNAGE SETTINGS: Adjustable via panel SYSTEM & PRESS STATUS MONITORING: Accessible via the touch panel DIE MEMORY: Adjustable via the panel LINEAR SCALE: NOVATECHNIK or TURCK PLC SYSTEM: DELTA TOUCH PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROX. WEIGHT: 9 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.