Odvod varilnega dima

ESTA - 793100 Filtower L-100

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, - RABLJEN - STROJ ZA UPIGANJE CEVI OSÍ: 3 MAKSIMALNI PREMER CEVI: 30 x 2 mm DELOVNA DOLŽINA: 3000 mm HITROST POZICIONIRANJA OSI X: 900 mm/s HITROST UPIGANJA OSI Y: 200 °/s HITROST ROTACIJE OSI Z: 360 °/s NAJVEČJI POLMER UPIGANJA: 20 DO 170 mm Ihedpevhc Uusfx Af Tjt KRMILNA ENOTA: DNC800

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: Ihsdsfgyicspfx Af Tot 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: rabljeno, Leto izdelave: 2018, DEMAG mostno dvigalo – Nosilnost 16 ton – Letnik 2018 Proizvajalec DEMAG Cranes & Components GmbH – Nemčija Tip Ihedpfx Afjxb D Nve Tst Industrijsko motorizirano mostno dvigalo – enojni ali dvojni nosilec Industrijska uporaba Za težka dviganja v jeklarnah, proizvodnih delavnicah, kotlarstvih, splošni strojni obdelavi in logističnih skladiščih Glavne tehnične specifikacije: - Nazivna nosilnost: 16 ton (16.000 kg) - Leto izdelave: 2018 - Proizvajalec: DEMAG – globalni vodilni v industrijskem dviganju - Motorizirano premikanje po tirnicah - Električni vitel z jeklenico (DEMAG standard, velika nosilnost) - Napajanje: industrijski trifazni tok - Upravljanje: obesek ali radijsko daljinsko upravljanje (odvisno od konfiguracije) - Stanje: rabljeno – nedavno, robustna zasnova 🧩 Uporaba stroja DEMAG mostno dvigalo z nosilnostjo 16T je zasnovano za težka dviganja v zahtevnih industrijskih okoljih. Velika nosilnost ter sodobna konstrukcija zagotavljata učinkovitost, varnost in dolgo življenjsko dobo. ⚙️ Značilnosti / prednosti - Srednje visoka nosilnost (16T) za težje industrijske procese - Sodobna izdelava (2018) skladna z aktualnimi varnostnimi standardi - Vgrajeni DEMAG vitel in električni sistemi - Možnost integracije avtomatizacije in daljinskega upravljanja

Stanje: zelo dobro (rabljeno), Heating boiler Loos UT 5200 kW incl. oil burner Isdpfx Afjmn Hpye Tjht

Stanje: novo, Bending capacity: 6.0 mm Working length: 3100 mm Material thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4,88 x 1,16 x 1,18 m Image similar Bending performance: 8.0 mm » at 3x top roll diameter. Pre-bending: 6.0 mm » at 1.5x top roll diameter. Top roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of the top and bottom rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device Iodpfx Aed Ab H Hsf Teht • Hardened rolls • Hydraulic adjustment of the side rolls, synchronized via PLC • Hydraulic adjustment of the lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Catalog, see the following link: Important points for cone rolling: • The max. sheet thickness is 50% of the nominal capacity • Cone length must be a max. of 30% or more than 60% of the roll length • Hardened rolls are recommended

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Initial commissioning: 2014 Control system: Heidenhain iTNC 530 HSCI incl. HR 520 handwheel Machine hours Machine power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Ihjdpfxswywcij Af Tet Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Drives linear axes Feed rate X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Connection data Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filtration system - 50-position chain tool changer - Workspace enclosure - Chip conveyor - LTA emulsion mist extraction system Optional at extra charge: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition, and still under power for inspection! The photos are for illustration purposes and show a new machine of this type. Original photos will follow shortly!

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.100 mm, najv. debelina pločevine: 50 mm, najv. debelina jeklene pločevine: 50 mm, skupna dolžina: 2.210 mm, skupna širina: 1.530 mm, skupna višina: 1.940 mm, skupna masa: 1.200 kg, vhodna napetost: 400 V, višina obdelovanca (maks.): 50 mm, moč: 6 kW (8,16 KM), vhodni tok: 18 A, Edge Rounding up to 1100 mm width. Ideal for edge rounding of light burrs up to 1100 mm working width. The DM1100 C performs edge rounding and removes sharp edges on both external and internal contours of parts made of stainless steel, steel, or aluminum, which have been cut using laser, shear, or punching machines. This machine processes parts of various dimensions, including products as small as 50x50 mm. The DM1100 C features a station with double cross belts for edge rounding, delivering clean, smooth, and burr-free edges on entire workpieces. DM1100 C Working capacity (mm): 1100x50 Number of cross-belt stations: 1 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.18 Total power (kW): 6 Power consumption (A): 18 Dust extraction connection per head (Ø mm): 150 Dimensions (mm): 2213x1530x1940 Ihsdpfx Afstzfnts Tjt Weight (kg): 1200

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, delovna širina: 600 mm, vhodna napetost: 400 V, skupna masa: 3.560 kg, višina obdelovanca (maks.): 170 mm, The fast deburring machine for deburring, edge rounding, and finishing steel parts up to 600 mm in width. Ijdpfxol Dw D Ej Af Toht This deburring and finishing machine from Q-Fin has been specifically developed for applying a large radius of up to 2 mm to steel sheet components. With the SER600 Super Edge Rounder from Q-Fin, you can deburr, grind, edge break, round, deslag, remove oxide layers, or perform linear finishing on sheet metal parts up to 600 mm wide. A combination of these operations is also possible. The throughput capacity of the SER600 is 3 to 5 times higher than that of comparable machines. This new 2025 model comes equipped with a magnetic support, making it ideal for processing flame-cut steel parts and other magnetic materials. The machine features 5 processing stations. It is operated easily via the HMI touchscreen panel located at the front of the machine. The first station of the SER600 consists of a grinding unit. The abrasive belt in this unit removes burrs and/or burn marks from the product surface. If there are no burrs, the abrasive belt can be omitted or removed. It is also possible to process your product with a finer abrasive belt or finish with a Scotch-Brite belt. The second and third stations feature a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations consist of 2 round brushes rotating in opposite directions (left and right). The brushes break the sharp edges of the product or, thanks to the unique combination of two brush systems, can round edges up to a radius of R=3 mm. With special brushes installed, the SER600 with magnetic system can also efficiently remove oxide layers from steel products or slag from plasma-cut parts. We offer the combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set.' The WES6000 was developed by Q-Fin to safely extract grinding dust without loss of suction. This fully stainless-steel extraction system operates wet, removing grinding dust from stainless steel, mild steel, and aluminum, thereby eliminating fire and explosion hazards. According to Q-Fin, this is the safest, simplest, and most sustainable solution for extracting grinding dust. The WES6000 ensures there is no grinding dust in the air and/or the work environment. Currently, we have 2 units of the SER600 in stock: 1x new (year of manufacture 2025) 1x very slightly used, like new (year of manufacture 2024) The machines can be inspected by appointment in Bergeijk. Both machines come with a 1-year warranty on the frame and all non-wear parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. - SER600 electrical connection: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Inventar livarne Kompleten inventar peščene livarne v Venlo-Lomm – Nizozemska Modelna linija HWS, tip SFM2 / 30 zabojev/uro Krmiljenje S/7 Iedpfovz Aprsx Af Tsht Lijak rezkar Stroj za streljanje jeder Röper H6,5-H16 hidravlični – krmiljenje S/7 Mešalec jedrnega peska znamke Klein YXLON rentgenska naprava Spektralna analiza Spectro Analizator Ideco Modelni stroji Priprava peska Talilne peči Trakasti brusilnik Zabojnik za nevarno blago Sušilna peč Tračna žaga Peskalni stroj Hali žerjav 32 t / žerjavna proga: 5750 mm / letnik 2002 Prisrčno vabljeni na ogled livarne Naprave in artikli se prodajajo rabljeni Prodajalec izključuje jamstva.

Stanje: rabljeno, Leto izdelave: 2012, x-pomik 1600 mm Ihodpfx Aexcbhxsf Tet y-pomik 4000 mm z-pomik 1200 mm Teža obdelovanca 3500 kg