Varilna rotacijska naprava je lahko vrtljiva

Ess DTH 120

Stanje: rabljeno, Rotating Welding Positioner, Welding Positioner, Welding Positioner, Welding Fixture, Welding Turntable, Welding Turn-and-Tilt Table, Welding Positioner - Table: tiltable - Clamping diameter: 450 mm Lhjdpfx Abod Im S Ejbjb - Drive: 0.2 kW - Speed: 0.08 - 2.4 rpm - Load capacity: 120 kg - Control: PS3E - Foot pedal - Dimensions: 520/450/H475 mm - Net weight: 110 kg

Stanje: zelo dobro (rabljeno), Here we offer a Polychromix Phazir NIR spectrometer. Lodpfx Abon Arm Tsbjhb Portable near-infrared analyzer Model: 1624 Specifications: Spectral range: 1600-2400 nm Pixel pitch: 8 nm Optical resolution: 11 nm Stray light

Stanje: rabljeno, Hydraulic Workshop Press, Broaching Press, Keyway Broaching Press Hydraulic Workshop Press, Custom built MaVo Type 5t-20 Previously used for broaching keyways in through-holes. Press capacity: 5 tons (at 100 bar hydraulic pressure) Frame width: 770 mm Cylinder stroke: 220 mm Distance from piston rod thread to table traverse: max. 900 mm Ram downwards press speed: approx. 11.5 mm/sec (220 mm in 19 sec) Ram upwards press speed: approx. 24.5 mm/sec (220 mm in 9 sec) Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz - Two-hand operation (2 buttons for down, 1 button for up) - HAWE hydraulic pump, Type K5/3 (can deliver up to 400 bar, but the pump becomes very loud at this pressure) - Piston rod thread connection: M42 x 1.5 mm external thread - 1 piece screw-in extension approx. 290 mm for piston rod with M42 x 1.5 mm internal thread - 1 piece screw-in extension approx. 250 mm for piston rod with M42 x 1.5 mm internal thread Lodowki Apjpfx Abbohb - 2 pieces ram extensions for inserting into screw-in extension, lengths: 110 and 130 mm - 2 support plates - Very robust steel construction made of 140 mm double I-beam - Estimated load-bearing capacity of the steel frame: likely 40 tons or more - Movable with pallet truck Required space (L x W x H): 1200 x 930 x 2280 mm Weight: 485 kg

Stanje: dober (rabljeno), Leto izdelave: 2001, Manufacturer: KASTO Model: KASTOtec A4 Year of manufacture: 2001 Specifications Metric / US Standard Cutting capacity round 90°: 430 mm Cutting capacity flat 90°: 430 x 430 mm Feed range: 0 - 600 mm Multi-feed range: 0 - 9999 mm Minimum cut length: 35 mm Maximum cutting speed: 12 - 120 m/min Saw blade dimensions: 6830 x 41 x 1.3 mm Power: 7.5 kW Approximate dimensions: Length: 4800 mm Width: 2200 mm Height: 2200 mm Weight: 5200 kg Ljdpfxju R R Avs Abbohb Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend that you verify all critical details.

Stanje: novo, ELMAG Portable Power Station ENERGY 2400, LiFePO4 Battery with 2232Wh ENERGY 600 - 2400 The new ENERGY series includes 4 performance classes of portable power stations, designed for off-grid power supply as well as emergency backup for your consumers. The wide range of applications covers all fields—whether camping, at festivals, as a power source for sales stands, or as an autonomous emergency solution in case of blackouts, ELMAG power stations are always your reliable companion. Display - Battery capacity in % and segments - Remaining runtime - Power output - Power input - Output status - Protection function status indicators Equipment Outputs: - 4x Schuko 230 Volt - 1x 12V car socket 10 A - 1x 12V round 10 A - 2x USB-C 60 W - 1x USB-A 5V 2 A - 3x USB-A QC3 Inputs: - 2x 7909 12V - 45V - 2x ANDERSON 12V - 45V Lhedpfjt H E Iqex Abbjb - 1x 12V car socket 10 A LED light 7W Digital display Protection class IP21 Safety Features: - Deep discharge protection - Overvoltage protection - Overcharge protection - Short-circuit protection - Overtemperature protection - Low temperature protection Supplied with: 2x 200W AC adapters 1x car charging cable ADVANTAGES Lithium iron phosphate battery (LiFePO4) for maximum safety and long service life Optimal operation even at high ambient temperatures High cycle stability > 2500 cycles 3 charging options: Solar, 230V, and 12V Advanced Battery Management System with comprehensive protection against undervoltage, overvoltage, overheating, short circuit, and overcharging Extensive connectivity: Schuko, 12V DC, USB-A, USB-C, etc. Digital display with detailed status monitoring Integrated MPPT solar charge controller Simultaneous charging and discharging possible Internal lighting with SOS function TECHNICAL DATA Battery type LiFePO4 Battery capacity 2.232 kWh Output waveform Pure sine wave Dimensions LxWxH 425x275x315 mm Weight 25 kg Max. output 1~230V 5000 W Continuous output 2400 W Max. charging power 400 W

Stanje: novo, Leto izdelave: 2023, Welding turntable, vessel rotator 6000 kg load capacity Digital display with foot control Diameter range: 180 mm to 3500 mm Drive roller diameter: 300 mm Dimensions: Length: 1900 mm x Width: 470 mm x Height: 390 mm Lhedpfxjk Adl Hs Abbeb Infinitely variable speed: 200 - 1800 mm/min.

Stanje: rabljeno, Leto izdelave: 2009, Cutting diameter: 15 – 560 mm Cutting range at 90 degrees: flat 560 x 630 mm Saw blade dimensions: 7,400 x 54 x 1.60 mm Ledpfx Abjvxwkfebshb Control system: KASTO Material feed – single stroke: 900 mm Multiple feed length max.: 9,999 mm Minimum cut-off length: 6.00 mm Saw motor: 5.50 kW Cutting speed: 13 – 127 m/min Material support height: 700 mm Total power requirement: 12.00 kW Machine weight approx.: 6.00 t Space requirements approx.: 3.70 x 2.50 x H2.50 m Two-column automatic bandsaw with KASTO Compact Control; frequency-controlled saw drive; minimum quantity lubrication; swarf conveyor; powered infeed conveyor 6m + 3x short roller conveyors 1m each; outfeed conveyor 2m; machine can be inspected under power.

Leto izdelave: 2009, Stanje: dober (rabljeno), številka stroja/vozila: 120P1109, OFFER 21407 Motorized Vessel/Drum Rotator with Rail-Mounted Carriage Technical Specifications: - Total load capacity (powered + idler unit): 40,000 kg - Load capacity per vessel rotator: 20,000 kg - Workpiece diameter approx.: 500 – 3,500 mm - Support roller center distance adjustable via trapezoidal-thread spindle - Roller diameter: 500 mm - Roller width: 150 mm - Powered unit with dual-side drive - Infinitely variable rotation speed - Handheld remote for forward and reverse operation - Drive: 400 V - Both units mounted on rail carriages Ljdjhcnhmopfx Abbohb - Required space for powered unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Required space for idler unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight powered unit: approx. 2,500 kg - Weight idler unit: approx. 1,800 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, 300 kg load capacity welding positioner, with 125 mm hollow shaft diameter with 320 mm or 400 mm chuck very robust totally variable speed control from 0.15 to 5.0 rpm current transmission 350 A table diameter 400 mm tilt angle up to 135° height horizontal 835 mm, tilted to center approx. 735 mm Lodpfx Abelamtbjbshb length 850 mm x width 580 mm

Leto izdelave: 2020, Stanje: novo, The Sapphire is the optimal solution for the heavy industry sector when working with material thicknesses up to 200 mm. It enjoys widespread popularity among a variety of manufacturing operations – often running in three-shift patterns – as well as in all areas where maximum stability, efficiency, and process reliability are essential. Thanks to its premium configuration, the system serves as a universal tool for the highest demands and is a valuable asset for process optimization. Now in use by more than 400 industrial companies worldwide, the Sapphire cutting system demonstrates its capabilities every day. Lhsdpfjf Ak N Rex Abbob Equipment - Harris oxy-fuel torch - Kjellberg plasma torch with e-touch interface - Kjellberg Q 3000 plasma power source with automatic gas console - Crosshair laser pointer for simplified positioning - CamConcept Finest Cut V 7 - Extraction table 3000 x 6000 mm - PFC 6 extraction unit incl. extraction pipes - Delivery, installation, and commissioning Main features • High dynamics and precision for automated 2D & 3D cutting of sheets, pipes, and profiles • Sheet processing for material thicknesses up to 200 mm • Comprehensive cutting database for optimal operator convenience • Designed to meet the most demanding conditions in continuous three-shift operations General technical data Drive type: Servo AC Available working widths: 2,000–7,000 mm Available working lengths: from 1,500 mm Positioning speed: 25,000 mm/min Cutting thickness: up to 200 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy: DIN-EN 28206 Safety module: DIN-EN 13850 Repeat accuracy: DIN-EN 28206 Working table height: 740–760 mm Operating ambient temperature: +5 °C to 45 °C Operating humidity: max. 90%