Podnebna preskusna komora

Espec EGNX12-6CWL

Leto izdelave: 2018, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H3000TM, Universal Testing Machine H3000TM Made in Germany Crosshead travel: 520 mm Working space depth: 66 mm Total height: 1010 mm Weight: 45 kg Test speed: 1 to 500 mm/min Return speed: 500 mm/min Travel resolution: 0.01 mm We offer a very large selection of clamping tools: screw clamps, wedge grips, pneumatic and hydraulic grips. Pressure plates, bending fixtures, friction coefficient fixtures, and much more. Extensometers, long-travel transducers, clip-on gauges, climate chambers. Load cells (selectable): 50 N, 100 N, 200 N, 500 N, 1000 N, 2000 N, or 3000 N Includes Hess software for Windows 8, 9, 10, or 11 for universal test procedures; simple tests can also be performed without a PC. Includes one 5 kN SP 56g screw clamp with pyramid or rubber jaws, 30x50 mm. Factory calibration certificate with DAkkS-calibrated measuring equipment. Calibration in both tension and compression in 10 steps. The H3000TM series universal testing machine is a single-spindle machine with a robust construction made from aluminium and V2A stainless steel, featuring ball screw drives, linear ball bearings, and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor-controlled and features a membrane keypad. The two-line LCD display shows both force and travel. The testing machine can be used either as a standalone unit or with a PC via USB interface. Travel measurement is by encoder, with 0.01 mm visible resolution on the LCD (internal resolution 0.0001 mm). The machine comes with a standard load cell with 0.03% linearity and corresponding calibration. Optionally, a second channel for an additional load cell or displacement transducer can be added. The universal testing machine is available with two different travel lengths, 500 mm or 1200 mm (measured without load cell and test fixture). Scope of delivery: One load cell of your choice (50 N, 100 N, 200 N, 500 N, 1000 N, 2000 N, or 3000 N), certificate, 220 V power cable, USB cable, manual, and CE declaration of conformity. Load Cell 3000N Measuring range: 1–3000 N (tension and compression), nominal 2 mV/V output signal Isdet Rg H Aopfx Agpea Overload protection: +/-100% Linearity: +/-0.05% Hysteresis: +/-0.03% Repeatability: +/-0.02% Including 1.5 m connection cable and calibration certificate.

Stanje: dober (rabljeno), Leto izdelave: 1990, Battenfeld 300/050 CD Battenfeld 200/050 CD Year of manufacture: 1991, 1992 Clamping force: 30 t Clamping force: 20 t Screw diameter: 22 mm Shot weight: 30.4 g Ijdpfxjfubkmo Agpja Tie bar spacing: 254 x 254 mm Available: 2x Battenfeld injection moulding machines

Leto izdelave: 1986, Stanje: pripravljen za uporabo (rabljen), Clamping force: 2,700 kN, injection volume: 20,300 cm³, injection pressure: 1,360 bar, total power output: 418 kW. The machine was completely overhauled in 2008, with new pumps installed and all bushings and guides replaced. In 2016, the machine received a new Siemens control system. In 2021, all pumps and valves were recalibrated, and all slide rails were replaced. Ijdpjpvkzysfx Agpsa

Stanje: zelo dobro (rabljeno), CTS Type: C-40/1000 CTS Climate Test Chamber Condenser: air-cooled refrigeration unit Control System: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Plain text error messages RS 232 interface Free switching channels for external test specimen control Temperature Testing: Isdjru Dzuepfx Agpja Temperature range: -40°C to +180°C Temperature change rate Heating rate: 2.0 K/min Cooling rate: 2.5 K/min Temperature deviation ± 0.1 to ± 0.3 K over time Heat Radiation: approx. 2500 W at +20°C approx. 2500 W at ± 0°C approx. 1500 W at -20°C Climate Working Range: Temperature range: +10°C to +95°C Humidity range: 10 to 98% r.h. Dewpoint range I: +7 to +94°C Dewpoint range II: -10 to +7°C Temperature deviation ± 0.1 to ± 0.3 K over time Humidity stability I, over time: ± 0.5 to ± 1.5 % r.h. Humidity stability II, over time: ± 1 to ± 3 % r.h. Panoramic window 570 x 710 mm Test chamber dimensions: Width 1000 mm, Depth 1100 mm, Height 900 mm External dimensions: Width 1270 mm, Depth 2220 mm, Height 1950 mm Test chamber volume: 1000 liters Tube ports, ø 50 mm Electrical connection: 400 V +6/-10% 3/N, PE 50 Hz Connected load: 8.4 kW Rated current: 12.4 A Refrigerant: R-404A Weight: 800 kg For your safety as a buyer, the following information: The following steps are carried out for our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change; errors excepted!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Vötsch shock test chamber. Temperature shock test chamber, water-cooled Two-chamber design Hot chamber: Temperature range for the hot chamber: +50°C to +220°C Temporal temperature deviation at center of usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 11 K/min Cold chamber: Temperature range for the cold chamber: -80°C to +70°C Temporal temperature deviation at center of usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Iedsigg Hnopfx Agpja Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions (W x D x H): 470mm x 650mm x 410mm External dimensions (W x D x H): 930mm x 2115mm x 1970+mm Port diameter: 67mm Nominal power: 10 kW Nominal current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information: The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. New refill with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Type: VT 7012 S2 Condition: used Scope of delivery: (see picture) (Technical data and specifications subject to change and error!) If you have further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Espec Type: Espec Model: TSA-303EL-W Water-cooled Cold chamber: -65°C to 0°C Hot chamber: +50°C to 200°C System: Two-zone test via flap switching Temperature fluctuation: ±0.5°C Hot chamber: Temperature heat-up time: Ambient temperature to +200°C within 15 min. Cold chamber: Temperature pull-down time: Ambient temperature to –70°C within 40 min. Temperature recovery: within 10 min. Internal dimensions (W x H x D mm): 970 x 460 x 670 External dimensions (W x H x D mm): 1870 x 1900 x 1770 (1805) Power supply: 400 V AC 50Hz; 70 A Refrigerant: R449A 5 kg, R23 2.0 kg Weight: approx. 1450 kg Year of manufacture: 2018 For your safety as a buyer, the following work is carried out on our offered chambers in advance: 1. Functional test and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant Isdpfx Aovgw Uaegpja 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), CTS Type: T-40/2000 Air-Cooled Temperature Test Chamber Technical Specifications: Refrigeration Unit: Air-cooled, low-noise, full hermetic design with stepless power adjustment via electronic monitoring and control system; environmentally friendly refrigerant R404A. Door: Fully openable, left-hinged door with one-hand operation, lockable. Shelf: Stainless steel, support surface 970 x 980 + 500 mm Load per shelf: max. 35 kg Total maximum load (all shelves): 100 kg Test Chamber Lighting: 3x halogen lamp 20 W, 12 V Control System: 32-bit controller LCD control panel Digital display of set and actual values Numeric input of setpoint values Plain text error messages RS 232 interface Free relay outputs for user-provided test item control Temperature Range: -40°C to +180°C Rated Voltage: 400V 3/N 50Hz Rated Power: 10.4 kW Rated Current: 17.2 A Compressor: TFH2516Z Cable port: nominal width 50 mm Control Panel Window: 570x710 mm Electrical connection, cable length: 5 m Technical Performance Data: Temperature Tests: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K (over time) Temperature change rate (acc. IEC 60068-3-5): Heating: 2.5 K/min Cooling: 1.5 K/min Heat Radiation: Approx. 2500 W at +20°C Approx. 2100 W at ±0°C Approx. 1500 W at -20°C Technical data specified for ambient temperature +25 °C, rated voltage 400V, without test samples, without radiant load, and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900 mm, Width 975 mm, Depth 2200 mm External dimensions: Height 1950 mm, Width 1290 mm, Depth 3145 mm Operating Data: Power supply: 400 V +6/-10%, 3/N, 50 Hz Rated Power: 17.2 kW Protection class: IP 22 Condensate drain: gravity flow, R 1/2" internal thread Sound pressure level (per DIN EN ISO 3744, measured 1 m in front): < 55 dB(A) Weight: approx. 1200 kg Important Safety Information for Buyers! The following actions are performed on all chambers we offer prior to sale: 1. Function check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Ijdpfx Aoup T Uqogpja Scope of delivery: (Refer to image) (Subject to change and error in technical data and specifications!) For further questions, feel free to contact us by phone.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 500022, The Stratasys Objet500 Connex 3 is a state-of-the-art 3D printing solution that brings your creative ideas to life. Its advanced technology enables precise production of complex and highly detailed models and prototypes. A standout feature of this impressive machine is its digital printing mode, offering you even greater flexibility in designing and realizing your projects. The Stratasys Objet500 Connex 3 utilizes PolyJet technology, which delivers highly accurate results with exceptional surface quality. Models can be printed with a layer thickness of either 30 µm or 16 µm, giving you the choice between maximum resolution or maximum speed. In both modes, PolyJet technology lets you print intricate models with fine detail. The enlarged build volume of 490 x 390 x 200 mm allows the Objet500 Connex 3 to produce a higher number of complex and detailed models in a single print session, saving both time and effort. Isdpforridhex Agpja Operation of the Stratasys Objet500 Connex 3 is straightforward and user-friendly. Using the free GrabCAD software, you can easily prepare your models and monitor the printing process. Available modeling materials include solid photopolymers in white, black, gray, blue, and transparent, supplied in 3.6 kg cartridges. The machine can also print with flexible and dental model materials. It is equipped with six material bays, allowing the device to automatically switch from an empty to a full cartridge, making even longer unattended printing possible. With the digital printing mode of the Connex series, you can produce complex multi-component and multi-material models. You have the freedom to combine different materials, colors, and Shore hardnesses within a single model. The Objet500 Connex 3 can mix up to three different model materials simultaneously. The printer uses the gel-like support material SUP705. For optimal removal of this material, a WaterJet cleaning station is recommended, which we can offer together with the printer. This printer is part of the Certified Pre-Owned (CPO) program. Certified Pre-Owned 3D printers are used units that have been refurbished and serviced by our experts, then verified through a 24-hour test print. For the Objet24, however, we also have several brand-new units in stock. Service agreements and other services We offer comprehensive advice before, during, and after your purchase. Along with our services such as on-site installation and team training, we also provide delivery of accessories, spare parts, and materials. Sign a maintenance contract with us and benefit from full planning and cost security, rapid response times, and minimized machine downtime. This means you take no risk with your purchase. If you are still unsure which 3D printing system is right for you, we are happy to advise you and answer any questions you might have about 3D printing. Request your individual quote today.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna višina: 500 mm, skupna širina: 300 mm, skupna dolžina: 5.500 mm, skupna masa: 2.200 kg, Oilze precision granite straightedge for hard rock applications - Dimensions: 5500 x 300 x 500 mm Iedpfxer Ellro Agpsa - Grade 00 = 11µm (2µ / 1000 mm) - Inspection certificate available as an option - Lateral guideway as T-rail on the rear side - Equipped with 5 granite supports (working height approx. 900 mm) Includes air-bearing measuring carriage for straightness measurement, etc. Includes probe with ball-tipped styluses and two evaluation units (Helios)