Vrtljive mize

Ernault & somua CNC Turning table 3500 x 3000 mm

Stanje: dober (rabljeno), Litoželezni podstavek – talna plošča Iedpfeh Auahox Ah Ajtr Uporabna površina (D x Š x V): 3600 x 1200 x 300 mm 4 T-utorji: širina 44 x 26 mm Opremljena z nivelirnimi nogami Teža: pribl. 3 t

Leto izdelave: 1984, Stanje: pripravljen za uporabo (rabljen), Rafamet UBB 112/2 Minimalni premer tekalne površine kolesa: 700 mm Itsdpfx Ahohvml Is Aer Maksimalni premer tekalne površine kolesa: 1120 mm Dolžina vpenjanja: 540 – 1050 mm Minimalna dolžina osi kolesnega para: 1640 mm Maksimalna dolžina osi kolesnega para: 2800 mm Maksimalna širina pnevmatike: 150 mm Maksimalna teža kolesnega para: 4000 kg Hitrost pomika sani nastavitve: 2000 mm/min Maksimalni pomik sani: 2000 mm/min Moč glavnega pogonskega motorja: 80 kW Teža cca: 40000 kg

Stanje: dober (rabljeno), NC Rotary Table with Motor Drive Continuously Adjustable Rotary Table (Indexing 0.001°) Manufacturer: Rückle Model: PKT 1000 Clamping Surface: 1400 mm x 1400 mm Overall Height: 319 mm Clamping Slots: 7 units Isdpefr Ih Dsfx Ah Ajtr Slot Size: 22 H7 mm Slot Pitch: 160 mm Centering Bore: 140 H6 mm Condition: Very good (used) Optional with machine base About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and control system modernization. Our services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system upgrades

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Isdpfx Ahsfg E Hpo Astr Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos are of an identical machine with a centre height of 225 mm. Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -B-axis infinitely adjustable, high resolution -Marposs measuring system for tool measurement -Active longitudinal positioning -ELASO GAP control on T1 and T2 contactless, integrated into the control interface -Semi-automatic balancing by ELASO, integrated into the control interface -Tailstock with manual retraction -Workpiece spindle MK5 with short taper mounting DIN 55026 -Internal grinding device, belt-driven Options (at additional cost): - New high-precision workpiece spindle with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface 24,000 rpm with integrated GAP sensor (delivery time applies) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic lead screw in X-axis Itedpfeuxfucjx Ah Aer - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, maintenance-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Control System: The grinding software consists of a basic licence and various options, which are available depending on the configuration of the machine. Software Base Functions: - External and internal oscillation grinding - External and internal plunge-cut grinding - External and internal face oscillation grinding - External and internal face plunge-cut grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed onto the wheel) - Semi-automatic oscillation grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 profile dressing diamonds - 1 profile diamond or dressing roll (dressing roll required) - Profile roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measurement (probe required) - GAP sensing (touch-up device required) OPTIONS (at additional cost): Software Profile Plunge Grinding: - External and internal profile plunge-cut grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single- and multi-start external and internal thread grinding with thread on the wheel dressed. Dressing of single- and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Software Non-circular Grinding: Prerequisite for non-circular grinding is equipping the workpiece axis with a high-resolution rotary encoder so the axis can be o

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 2.200 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 196691, potovalna razdalja osi X: 5.000 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.000 mm, proizvajalec krmilnikov: Okuma, model krmilnika: OSP-P300, največja hitrost vrtenja: 6.000 obr/min, moč: 22 kW (29,91 KM),

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, poteza s peresom: 35 mm, hitrost vretena za brušenje: 1.670 obr/min, skupna masa: 4.000 kg,

Stanje: dober (rabljeno),

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1996, Retrofittato: 2025 Controllo numerico: NUEVO/NEW HEIDENHAIN TNC-320 Caratteristiche tecniche Dimensioni Dimensioni tavola: 6000 x 2000 mm Numero cave a T: 13 Dimensione cave a T: 22 mm Corsa assi Corsa asse X: 6000 mm Corsa asse Y: 3800 mm Corsa asse Z: 1000 mm Capacità verticale (VC): 500 / 1500 mm (uscita diretta) Distanza tra le colonne: 3100 mm Testa di fresatura Testa universale UM40 (Corpo B: manuale / Corpo C: indicizzazione automatica a 3°) Mandrino diretto Sistema di bloccaggio utensile: idraulico Attacco cono: ISO50 (DIN-69871) / Tirante: DIN-96872 Gamma di velocità: 3000 giri/min Potenza mandrino: 30 kW Avanzamenti Avanzamento rapido (X / Y,Z): 7200 / 12000 mm/min Peso e dimensioni Peso macchina approssimativo: 50000 kg Portata massima sulla tavola: 15000 kg Dimensioni macchina approssimative: 14740 x 5330 x 5050 mm Accessori Iodpfxewfunyo Ah Aotr Carterature: 2 porte scorrevoli con nuova recinzione di sicurezza perimetrale in rete metallica Cambio testa: automatico con cerniera/supporto laterale su colonna Evacuatore trucioli: 2 pallet longitudinali Volantino elettronico: nuovo HR-510 Refrigerazione: esterna e interna ad alta pressione tramite mandrino (solo interna con testa ad uscita diretta) Condizioni di vendita Garanzia: 6 mesi sulle parti di ricambio meccaniche Condizioni di vendita e prezzo: su richiesta Visualizza tutte le caratteristiche tecniche

Leto izdelave: 1983, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of Manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head mounting diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely adjustable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit bottom) Power supply / connected load: 380 Volt 50 Hz / 22 kW Isdpfxsd Nb A No Ah Astr Accessories / Special Features: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated draw heads according to DIN 1417/18 for locking the broaching tools in the draw bridge. The needle ejector heads in the tool feeder are hydraulically locked. The machine is fitted with a coolant system with an integrated magnetic tape chip conveyor for pit installation. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle ejectors are available on request. The machine can be inspected at our warehouse.