Postrojenje za regranulacijo

Erema IntErema 756 K

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 1.851 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 70 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 500 kg, skupna masa: 17.000 kg, kapaciteta rezervoarja za olje: 70 l, Technical Specifications Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410 BS-22/50 Year of Manufacture: 2023 Bdsdpfx Abeu Thbxegjk Pump Operating Hours: 1,851 hours (as of July 2024) Pressing Force: 70 t (equipped with a 70 t hydraulic cylinder, special feature) Specific Press Force: 90.9 N/cm² (equipped with a 70 t hydraulic cylinder, special feature) Feed Hopper Dimensions: 1,400 x 1,000 mm Theoretical Cycle Time: 13 seconds Theoretical Throughput: 266 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 22 kW Total Connected Load: 65 kW Binding: 4-fold vertical, fully automatic Throughput Rates at Bulk Densities of: - 30 kg/m³: approx. 5.5 t/hour - 50 kg/m³: approx. 7.5 t/hour - 100 kg/m³: approx. 9.7 t/hour Bale Weights (at a bale length of approx. 1.2 m): up to 500 kg, depending on material PLC Control: Siemens S7-1500 Operator Panel: Schneider Harmony Press Dimensions, Assembled: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport Weight (Press): 17 t Special Equipment: - Wear-resistant floor made of HARDOX steel - Larger main hydraulic cylinder with 70 t pressing force - Special press ram for compacting loose bulk materials with small particle size - OptiCut XS system for reduced cutting forces and increased throughput - Special press plunger for compacting "challenging" materials Technical Data for Conveyor: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: KGF GB 1500 Year of Manufacture: 2023 Drive Power: 4.0 kW Belt Speed: approx. 0.3 m/second Feed Belt Length: 2,679 mm Inclined Belt Length: 6,866 mm Gooseneck Length: 1,272 mm Incline: 35° Usable Width: 1,400 mm Sidewall Height (Inclined Belt): 800 mm Cleat Height: 50 mm Cleat Spacing: 750 mm Belt Quality: EP 400/3, 3:1 (DIN Quality N) Overall Height: 4,515 mm Transport Dimensions (overall): 11,148 x 2,502 mm (L x W) Technical Data for Contactless Personnel Protection System: Manufacturer: BOREMA Umwelttechnik AG, Switzerland Model: APSS iBOR 22 Year of Manufacture: 2023 Condition of the Baling System: Due to its low operating time of only 1,851 pump hours and the exclusive processing of paper, cardboard, and film, the entire plant is in very good condition. Scope of Delivery: - Avermann baler, type AVOS 1410 BS-22/50, including wire feeding stations and bale chute - Avermann conveyor, type KGF GB 1500 - BOREMA personnel protection system, type APSS iBOR 22 Remarks: Complete documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection by appointment possible. We accept no liability for technical details or possible errors.

Stanje: pripravljen za uporabo (rabljen), Model: Balirka HSM V-press 1160 plus Pritisk (kN): 532 Učinkovitost (bale/uro): 1-2 Maks. velikost bale (mm): 1200x1100x1000-1200 Dimenzije d x š x v (mm): 1780x1150x2985 Moč (kW): 7,5 Letnik 2007-2008, cena 5500 EUR Bdodpfx Absra Nyujgsk Letnik 2009-2010, cena 5800 EUR Letnik 2011-2013, cena 6300 EUR Na voljo tudi balirke HSM v press 1160 max, letnik 2014-2015 Teža (kg): 2300 NA VOLJO TUDI LETNIKI 2017-2018 - 7500 EUR

Leto izdelave: 2008, obratovalne ure: 40.000 h, Stanje: dober (rabljeno), številka stroja/vozila: HBC 140 2x75kW 2008 (00191), Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Balenpers (2x75kW). Balenpers: Gewicht: 47.100 kg Bouwjaar: 2008 Hardox bodemplaat alleen Variabele kanaaldrukregeling Kunststof ventiel Hydraulische pomp aangedreven door frequentieregelaar Anti-ratten bekabeling Dieptefiltratie van olie Modem Draaiuren: 40.000 Deze pers kan ook volledig gereviseerd geleverd worden volgens de 'Bollegraaf OEM Certified Refurbishment standards'. Dit omvat 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van revisie Bjdpskcgf Hjfx Abgsdk Reiniging & demontage Voordat de daadwerkelijke revisie plaatsvindt, wordt de balenpers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Spelingen Na demontage worden de toleranties van alle stalen onderdelen gemeten en waar nodig opnieuw gelast. Dit geldt in ieder geval voor de volgende componenten: • Perswagen (ram), • Frame, • Kanaal, • Voordruk-klep (pre-press-flap) Na demontage en inspectie wordt de perswagen opnieuw opgelast en voorzien van nieuwe perswielen. De beschermroosters en de voordruk-klep worden uitgedeukt en waar nodig gerepareerd. Opnieuw gespoten Na het meten van de toleranties en eventuele herstel- en laswerkzaamheden worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen en slangen worden vervangen. Hydraulische componenten worden herverpakt. De hydrauliekolie wordt ververst. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitkasten worden vervangen en teruggeplaatst op goed toegankelijke posities. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het kanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vervangen voor nieuwe. Cilinders: De cilinders worden herverpakt en indien nodig voorzien van een nieuwe chroomlaag of nieuwe cilinderstang. MCC-kast De schakelkast wordt gecontroleerd en gereinigd. Indien nodig worden elektronische componenten vernieuwd. De PLC en HMI (human interface) worden vervangen door de nieuwste Schneider M340 versie inclusief de nieuwste software.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, premer vijaka: 38 mm, This machine is in storage at Plastima Used Machinery. Bsdsvcqccopfx Abgedk

Stanje: rabljeno, številka stroja/vozila: 12599, Rotor diameter: 600 mm Rotor width: 1,450 mm 12-knife rotor 3 rows of stator knives Feed opening approx. 780 x 1,490 mm Bdjdpjk N Iy Nsfx Abgok Drive motor: 132 kW

Stanje: novo, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Weight: approx. 225–320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), Form B1 *EQUIPMENT HIGHLIGHTS: -Control and monitoring unit: Smart Controller (7" touch display) Bodpfsg Ey Rfsx Abgodk -Heating control via solid-state relay -Control cabinet IP54 -Cooling managed via solenoid valve -Flow measurement using differential pressure principle -Bypass between supply and return with reduced cross-section -Level monitoring via magnetic float switch -Flow monitoring by measuring heating element surface temperature and flow rate -Dirt filter in cooling water supply and in the return of the circulation system -Feed temperature monitoring via electronic safety temperature limiter -External oil filling port -Dilo screw fittings on internal piping connections (except pump connections) -At 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanket with manometer and safety valve 0.5 bar at 350°C (optional) Visit our website for more details or for other performance classes. *The unit complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in quotations or order confirmations.

Leto izdelave: 2016, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Pralna linija za HDPE folijo leto izdelave: 2016 0 delovnih ur (nikoli ni delovala) blagovna znamka: NEUE HERBOLD, D-74889 SINSHEIM sestavljena iz: mokri granulator tipa SM 450/600-S5-2 Frikcijska pralna naprava tipa FW 560/3000 transportni vijak Plavajoči rezervoar (ločitev plavajočega in potopljenega) tipa TB 500 mehanski sušilnik tipa TM 1005 Sesalna enota tipa MFT 55/500 Bdedpfxjtuui Ds Abgok Električno krmiljenje

Stanje: rabljeno, Leto izdelave: 2006, Package dimensions: 400 x 400 mm Bdjdpfx Aeltinwebgok Pressing force (1st stage): 850 kN Pressing force (2nd stage): 850 kN Pressing force (3rd stage): 850 kN Steel throughput: up to 8 t/h Aluminium throughput: up to 4 t/h Drive power: 50 kW Footprint: 7.5 x 7.2 m Machine weight: 29 t Press chamber opening: 1.9 x 0.95 m Location: Germany Available immediately

Leto izdelave: 1998, Stanje: dober (rabljeno), številka stroja/vozila: 3862-8063-564, Offer 23036 Technical Specifications: - Drilling capacity in solid steel ST 60: 32 mm - Drilling capacity in GG 25: 40 mm - Thread cutting in ST 60: M 27 - Drill spindle taper: MT 4 - Quill stroke: 150 mm - 12 spindle speeds: 102 – 2000 rpm - 3 feed rates: 0.1 – 0.3 mm/rev - Min./max. distance spindle – table: 310 / 610 mm - Drilling radius min / max: 400 / 1200 mm Bdsdokzg T Rjpfx Abgok - Table height: 720 mm - Table size: 1200 x 500 mm - Drive: 400 V / 1.6 / 2.9 kW - Space required approx.: W 1200 x H 2800 x D 2300 mm - Weight approx.: 1500 kg - Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - T-slots vertically positioned at the rear of the machine

Stanje: delavnici obnovljeno (rabljeno), Stock no. 2553 1 used, partially overhauled and function-tested extruder, consisting of: Material hopper Single-screw extruder BATTENFELD type UNI-EX 1-75-25 B Screw diameter: 75 mm – 25 L/D, barrel air-cooled Screw speed up to 130 rpm Drive 120 kW – DC (overhauled), drive via belt pulley Heating zone control sections for downstream equipment Control cabinet, melt pressure sensor Inspection / test run possible at short notice by arrangement at our Wuppertal facility. Matching accessories available: Bodsiyyndjpfx Abgjdk > Screen changer > Pelletizing (strand, hot face cut, or water ring) > Miscellaneous Further extruders and complete lines are available for demonstration ex works Wuppertal. We look forward to your enquiry or your visit.