Stroj za brizganje

ENGEL VC 330/180 tech – Duroplast

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 17.000 h, vpenjalna sila: 220 kN, premer vijaka: 50 mm, Year: 2018 Control type: CC300 Isdevtm Uispfx Af Tjal Operating hours: 17,000 h Storage location: MECA PLASTIC Availability: Available Clamping force: 220 t Opening stroke: 530 mm Tie bar spacing: 620 mm x 620 mm Platen dimensions: 900 mm x 900 mm Minimum/maximum mould height: 250/600 mm Maximum daylight: 1,220 mm Screw diameter: 50 mm Screw L/D ratio: 20:1 Shot volume: 432 cm³ Max. injection pressure: 2,002 bar Motor power: 29 kW Heating power: 15.3 kW Weight (clamping unit): 11.3 t Machine dimensions (L x W x H): 6.30 m x 1.80 m x 2.10 m Core pulls: No Robot interface: Yes Bi-metallic screw: Yes

Stanje: rabljeno, Leto izdelave: 1991, Pressure: 650 t Clear width: 920 mm Stroke: 1750 mm Machine weight approx.: 47 t Table area: 2000 x 1500 mm Ram area: 2000 x 1500 mm Installation height: 2100 mm Iedofhmuvjpfx Af Tsal Hydraulics: 203 bar Closing speed: 500 mm/min Pressing speed: 0.5 - 10.4 mm/sec Opening speed: 250 mm/sec Release speed: 0.5 - 66.4 mm/sec Return force: 150 t Total power requirement: 75 kW Space requirement approx.: 4.4 x 2.5 x 7.5 m

Stanje: rabljeno, Leto izdelave: 2019, Year: 2017 Control type: CC300 Operating hours: 20,000 h Storage location: MECA PLASTIC Availability: AVAILABLE Clamping force: 160 t Opening stroke: 460 mm Tie bar spacing: 520 mm x 520 mm Platen dimensions: 760 mm x 760 mm Mould height min/max: 250/600 mm Max distance between platens: 1060 mm Screw diameter: 35 mm Screw length: 20D Iodpfxev I Uw Ij Af Tjal Shot volume: 154 cm³ Max injection pressure: 2000 bar Motor power: 21 kW Heating power: 9.2 kW Clamping unit weight: 8.4 t Machine dimensions (L x W x H): 5.90 m x 1.70 m x 2.20 m Core pull: NO Robot interface: YES Bi-metal screw: YES

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Machine: ENGEL VICTORY 500T / 7050 (Year of manufacture: 2017) Year: 2017 Iaedpjxvingofx Af Tel Control unit: CC300 Operating hours: 565 h Availability: Immediately Clamping Unit: Clamping force: 500 tonnes Opening stroke: 1100 mm Tie bar spacing: 1500 × 1285 mm Platen size: 1500 × 1285 mm Minimum mould height: 500 mm Maximum daylight (open distance): 1600 mm Injection Unit: Screw diameter: 120 mm Screw length (L/D): 22 D Shot volume: 5430 cm³ Maximum injection pressure: 1600 bar General data: Motor power: 98 kW Heating power: 30 kW Clamping unit weight: 31 tonnes Injection unit weight: 15 tonnes Machine dimensions (L × W × H): 10.50 m × 2.30 m × 2.30 m Options: Core pulls: 3 Robot interface: No Bimetallic screw/cylinder: Yes Other equipment: STAUBLI magnetic platens, 24 hot runner heating zones Note: The machine has very low operating hours (565 h) and belongs to the modern, tie-bar-less ENGEL Victory series, ideal for large moulds and high-precision production.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036721, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, razmak između stupova: 1.110 mm, delovna prostornina: 1.078 cm³, tlak vbrizgavanja: 1.877 letvica, injekcijska masa: 981 g, odmični hod: 3.200 mm, višina plošče: 1.540 mm, vrsta pogona: Hydraulisch, prosta razpetina: 3.200 mm, teža orodja: 2.200.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are optimally absorbed and the service life of your molds is increased. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM • MC 6 with 24" TFT color display featuring multitouch functions CLAMPING UNIT • Clamping force kN 6500 • Max. mold opening force kN 455 • Clear width (h x v) mm 1110 x 960 • Mounting platen (h x v) mm 1540 x 1440 • Mold installation height, min. - max. mm 1550 (without center plate) • Max. opening stroke mm 3200 • Max. mold opening path mm 1650 • Max. mold weight kg 22000 INJECTION UNIT 1 SP2000 • Screw diameter/type mm 60 / Thermoplastic • Effective L/D ratio 23.3 • Injection pressure bar 2420 • Shot volume cm³ 792 • Shot weight at max. stroke for PS g 720 • Injection speed mm/s 140 • Injection flow cm³/s 396 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 72.2 • Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 • Screw diameter/type mm 70 / Thermoplastic • Effective L/D ratio 20 • Injection pressure bar 1877 • Shot volume cm³ 1078 • Shot weight at max. stroke for PS g 981 • Injection speed mm/s 140 • Injection flow cm³/s 539 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 98.3 • Nozzle contact force kN 82 ELECTRICAL PARAMETERS Connected load kW 341 • Power supply V/Hz 400/50 (3 phases with neutral conductor) WEIGHT AND DIMENSIONS • Net weight t 43.5 • Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT • Wear-resistant plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • BluePower ServoDrive • Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) • Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) • Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) • Mold heating: 96-fold (3.5 kW) • Euromap interface for handling: E18 • Euromap interfaces (mainframe): E67, E77, E78, E63, E82.1 • Adaptive Process Control (APC+) • Graphic analysis package • Sliding table with turning unit, servo-driven • Vertical center plate • Parallel closing and opening pressing during the injection process with parallelism control between FWAP and center plate or BWAP and center plate • ColorForm interface: signal interface for integration of an RPM system • Electrical interface for HRS Flexflow system Ijdjw U N Ixepfx Af Tsal • Electrical interface and hydraulic valves for "1-K dummy operation" • Interface for connection of a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered on request. We look forward to your inquiry.

Stanje: pripravljen za uporabo (rabljen), Na voljo je okvarjen vertikalni CNC-obdelovalni center DMG Mori. Hodi X/Y/Z: 835mm/510mm/510mm, mest za orodje: 20, držalo za orodje: SK40, število obratov: 10000min⁻¹, dimenzije mize X/Y: 1000mm/560mm, razmak T-utorov: 100mm, maksimalna obremenitev mize: 800kg, višina mize: 720mm. Krmilje: Heidenhain TNC 530, delovnih ur: cca 29836h. Okvarjen je bodisi pnevmatski izpustni cilinder ali vreteno. Na voljo je dokumentacija. Ogled na lokaciji je možen. Ijdex Ivkzspfx Af Tjal

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Krauss Maffei KM 850-12000 MX Injection Moulding Machine Iaedpfxswqdyij Af Tjl Year of manufacture: 2011 LRX 500 Robot Z-axis: 4000 mm X-axis: 1500 mm Y-axis: 1250/1250 mm Hydraulic-mechanical, two-platen clamping system with 4 pressure pads and 4 locking units on the movable platen. PV - injection unit control adjustment. MC 5 control system with colour monitor, integrated control panel and USB data carrier. Plasticising unit: Complete plasticising unit for thermoplastics with a 135 mm screw diameter, non-return valve and open nozzle. Nozzle radius: 25 mm, nozzle orifice: 9 mm TECHNICAL DATA Clamping Unit - Clamping force: 8,500 kN - Mould opening force: 560 kN - Platen dimensions (H x V): 1600 x 1600 mm - Tie bar clearance (H x V): 1140 x 1140 mm - Mould opening stroke: 1600 mm - Mould height (min-max): 500 - 1100 mm - Daylight: 2100 mm - Ejector stroke: 300 mm - Ejector force: 200 / 100 kN Injection Unit - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Shot weight for PS: 6,098 g - Injection rate: 1,414 cm³/s Electro-hydraulic equipment - Rated pump motor power: 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2,440 l Weight and dimensions - Net weight with control cabinet: 49 t - Installation space (L x W x H): 11.72 x 2.92 x 2.71 m

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Vbrizgalna enota Teža vbrizga: 172 g Premer polža: 70 mm Zapiralna enota Zapiralna sila: 2200 kN Stroj Arburg 570 S 2200-800/290 je bil proizveden leta 2020. Opremljen je s hidravličnim pogonom in krmilnim sistemom Selogica za natančno delovanje. Z zapiralno silo 2.200 kN in premerom polža 40 mm je idealen za zahtevna vbrizgovalna dela. Izkoristite priložnost za nakup tega hidravličnega vbrizgalnega stroja Arburg 570 S 2200-800/290. Za več informacij nas kontaktirajte. Iaodpsx Nkp Isfx Af Tel Vrste uporabe Vbrizgavanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 58.350 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 3.000 kN, premer vijaka: 60 mm, Clamping Unit: Clamping force: 3000 kN Maximum mold opening force: 160 kN Moving platen opening force: 86 kN Moving platen closing force: 68 kN Clamping platen size (H x V): 995 x 1050 mm Daylight opening (H x V): 630 x 630 mm Mold opening stroke: 820 mm Minimum mold height: 330 mm Maximum opening width: 1150 mm Ejector stroke: 200 mm Ejector force, forward/backward: 58 kN Isdpow H Rvisfx Af Teal Injection Unit: Screw diameter: 60 mm L/D ratio: 21 Injection pressure: 2000 bar Shot volume: 679 ccm Shot weight (PS): 618 g Injection flow: 325 ccm/s Screw speed: 259 rpm Plasticizing capacity: 58 g/s Nozzle contact force: 110 kN Electrohydraulic Equipment: Rated pump motor power: 45 kW Installed heating capacity: 23 kW Number of barrel heating control zones: 6 Oil filling capacity: 720 l Dimensions and Weights: Space requirement (approx.): 6.20 x 2.20 x 2.40 m Total weight: 14,370 kg Maximum mold weight: 3,430 kg Accessories: - Oscillating elements - 8-circuit water manifold Additional Equipment: - 1 x air valve - 2 x core pullers - 8 x hot runner controllers - Robot interface according to Euromap 12

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, The unit was ordered but then not integrated into the production line, i.e., it has never been in serial operation. The system was intended to convey a small cap for a sensor clip. Lanco Integrated Linear feeder at the outlet: Type LF28 / 4.5-5.5kg Ijdpfsv Uqm Sox Af Toal Vibratory feeder unit VZ: VZ 500 Z-L (bowl feeder) Control unit SV2-2-8z (OKU Ident No.: 14420) Documentation available in paper form The original price was €20,000.