Stroj za brizganje

ENGEL VC 1350/200 Tech

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Machining Center Manufacturer: Weeke Model: BHX 500 Year of Manufacture: 2008 Working Range X: 2,500 mm Working Range Y: 1,300 mm Working Range Z: 4 - 80 mm Number of Milling Units: 2 Number of Drilling Units: 2 Vertical Drilling Spindles: 72 Horizontal Drilling Spindles (X): 16 Horizontal Drilling Spindles (Y): 4 Grooving Saw: Swivels 90° Gedpfx Abeh E Sghjrjbu X-Axis Speed: 130 m/min Y-Axis Speed: 80 m/min Z1-Axis Speed: 50 m/min Z2-Axis Speed: 27 m/min Spindle Speed: 18,000 rpm Dismantled - immediately available

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: omejena funkcionalnost, premer diska: 525 mm, Weight approx. 1,900 kg Dimensions (LxWxH) approx. 1,800 x 1,500 x 2,200 mm Lapping plate diameter 525 mm Maximum lapping ring width 175 mm Maximum workpiece size 170 mm Gbedpfxoh Invrs Abrsu Lapping plate speed 45/70/90/140 rpm Main drive power 4.0 kW Connection 400V/50Hz Emergency stop switch Conventional control with operator panel Full-featured lapping machine, conventional control

Stanje: rabljeno, Leto izdelave: 1999, obratovalne ure: 65.090 h, Funkcionalnost: popolnoma funkcionalen, ET365 GS s podajalnikom palic in transporterjem za ostružke Stroj je popolnoma opremljen - Odtočni pladenj - Visokotlačna črpalka - Klimatska naprava za električno omarico - Kupa podajalnik - Stroj je bil kupljen iz delujoče proizvodnje in tehnično pregledan - Geometrija izmerjena in vse nastavljeno - Izrabljeni deli zamenjani - Vse funkcije pregledane oz. nastavljene Stroj je popolnoma delujoč in pripravljen za takojšnjo proizvodnjo Gbodpfjycvaqjx Abrsu Stroj je takoj na voljo

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, VSM3.0DRO A-M Stroj za glodanje sedežev ventilov – nova naprava. Digitalni prikazovalnik na stroju za glodanje sedežev ventilov. Visoko natančen stroj za glodanje sedežev ventilov, posebej zasnovan za večventilske glave motorjev. Obdelovalna zmogljivost: od 16 mm do 90 mm. Spremenljiva hitrost od 100 do 1200 vrt/min. Največja širina glave motorja: 500/19,7 mm/inč Največja višina glave motorja: 450/17,7 mm/inč Naklon glave motorja: +42°- -42° Največji naklon vretena: 5° Pomiki: - Prečni: 930/37 mm/inč - Vzdolžni: 40/1,6 mm/inč - Vreteno: 200/8 mm/inč Moč vretena: 1,8 kW Gjdpfx Abovmpnlsrebu Maksimalna hitrost vrtenja vretena: 0–1000 vrt/min Napajanje: 380V/50Hz 3 faze ali 220V/60Hz 3 faze Priključek za zračni kompresor: 6/87 bar/psi Stopnja hrupa: pri 400 vrt/min 72 dBA; pri 1200 vrt/min 82 dBA Teža: 1050/2310 kg/funt Dimenzije (D x Š x V): 1040 mm x 1050 mm x 2170 mm

Stanje: novo, Leto izdelave: 2025, Laserska moč: 6000W / 12000W / 20000W Primeren material: kovina Stanje: novo Tip laserja: vlakenski laser (fiber laser) Delovna površina: 3000 x 1500 mm Hitrost rezanja: 200 m/min Podprti grafični formati: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT Način hlajenja: vodno hlajenje Certifikati: CCC, CE, GS, ISO, SGS Blagovna znamka laserskega vira: IPG/MAX Teža: 11.000 kg Garancija: 3 leta Napajanje: 110V / 220V / 380V 50Hz/60Hz Gsdsg Du Aqspfx Abrobu 1. Flagship serija Izjemno dinamičen odziv, enostavno obvladuje kompleksne vzorce na pločevini. 2. Samodejno iskanje robov Funkcija prepoznavanja nepravilnih pločevin, čas iskanja robov je skrajšan na 3 sekunde. 3. Samodejni menjalnik šob Stroj zamenja šobo v le 35 sekundah, kar pomeni do 50 % prihranek časa.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Kwik-Way SVS2 Deluxe brusilnik ventilov – kot nov Vključuje brusilnik nihajnih ročic. Tehnične podrobnosti: Natančna 6-kroglična vpenjalna glava Gjdpfx Absnacu Dsrjbu Natančnost: 0,005 mm Minimalni premer stebla ventila: 4 mm Maksimalni premer stebla ventila: 14 mm Minimalna dolžina stebla ventila (pribl.): 85,73 mm Maksimalni premer glave ventila: 100 mm Premer brusilnega kamna za ventile: 178 mm Premer brusilnega kamna za površine: 76 mm Moč motorja vretena: 0,37 kW Moč motorja vpenjalne glave: 0,06 kW Kapaciteta hladilne tekočine: 3,8 l Število vrtljajev vpenjalne glave (pribl.): 100 – 300 Brusni koti: 13° – 62° Glavne mere: Š x D x V: 940 x 559 x 406 mm Teža: 141 kg Če vas zanima, prosim kontaktirajte! Na voljo še druge stroje: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Brusilniki ventilov, stroji za obdelavo glave in bloka, rezkanje sedežev ventilov, tlačni preizkuševalniki, pralni stroji za dele

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M254, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 380 V, skupna širina: 4.000 mm, skupna dolžina: 3.000 mm, skupna višina: 150 mm, Oprema: dokumentacija / priročnik, Due to the relocation of our production, this machine has been put up for sale. Our activities consist of the sale of essential oils, which were bottled using this machine. Gbjdpfxovkcavo Abrou User manual available.

Stanje: rabljeno, Leto izdelave: 2008, Technical details: Workpiece diameter - max.: 29 mm Workpiece diameter - min.: 26 mm Workpiece length: 66 mm The system was originally supplied for the following workpiece dimensions: Diameter 26 mm - 29 mm Length 65 mm - 66 mm By using interchangeable parts in the clamping device, handling, etc., diameters up to approx. Ø50 mm should be feasible. An overall length of nearly 400 mm should be possible with some modifications. Gbodpfx Aslqac Sebreu This also depends on tool lengths, machining lengths on the component, etc.

Stanje: rabljeno, Leto izdelave: 2007, Maximum turning diameter: 356 mm Turning length: 705 mm Control: MSX 850 III MAPPS Mitsubishi Swing diameter over bed: 923.8 mm Swing diameter over cross slide: 755 mm Standard turning diameter: 275 mm Max. spindle speed: 4,000 rpm Main spindle drive power: 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bearing diameter: 140 mm Spindle bore: 91 mm Max. bar capacity: 80 mm Chuck diameter: 305 mm C-axis: 0.001° Speed range – sub spindle, max.: 6,000 rpm Sub spindle drive power: 11 / 7.5 kW Spindle nose: JIS A2-5 Spindle bearing diameter: 85 mm Spindle bore: 43 mm Chuck diameter: 210 mm C-axis: 0.001° Number of tool stations: 12 pos. Number of driven tool stations: 12 pos. Shank diameter: 26 mm Drill shank diameter: 50 mm Gedpozb N Uxjfx Abrsbu Speed range – driven tool stations, max.: 6,000 rpm Turret indexing time: 0.25 sec. X-axis travel: 260 mm Z-axis travel: 795 mm B-axis travel: 734 mm Max. feed rate: 30,000 mm/min Rapid traverse X/Z/B: 30 m/min Rapid traverse C: 400 rpm Total power requirement: 39 kVA Machine weight approx.: 6.0 t Space requirement approx.: 5.0 x 2.5 x 2.3 m CNC Turning and Milling Center MORI SEIKI - NL 2500 SMC / 700 - Driven tools - C-axis - Sub spindle - WITHOUT extraction system

Stanje: dober (rabljeno), Leto izdelave: 2017, EDGEBANDER WITH DIGITALLY CONTROLLED SETTINGS WITH EDGE TRIMMER (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Workpiece height: 8 - 58 mm 10 to 45 mm with corner rounding unit in use - Panel length: 210 to 2500 mm - Minimum workpiece width: 90 to 1100 mm - Edge thickness (roll): 0.4 to 3 mm without corner rounding max 3 mm with corner rounding unit - Edge thickness (strips): max 6 mm without corner rounding max 3 mm with corner rounding unit - Edge width: panel thickness + 2mm each side - Feed speed: 11 m/min - Minimum workpiece gap: 600 mm - Panel overhang (relative to conveyor chain): 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Ø800 mm reel holder - Front workpiece support extension - Easy Size: digital positioning of infeed fence and workpiece passage height - Anti-adhesive spray unit - Edge trimmer (RT-V) 12,000 rpm - Infrared panel pre-heating at infeed - Glue unit (VC-VM) with interchangeable gluepot for granules, 1 kg capacity. Heat-up time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers incl. 1 motorised and timer-controlled roller - Tilting end trimming unit 0-20°, 12,000 rpm - Top/bottom flush trimming unit with digital position adjustment with copying system. 1/4 round (radius 2 mm) or chamfer cutter, 12,000 rpm - Corner rounding aggregate R2mm, 12,000 rpm with digital positioning - Top/bottom radius scrapers R1 & R2 mm with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (nebuliser) OTHER SPECIFICATIONS: - Trimmer motors: 2x2 kW - End trim motors: 2x0.19 kW - Height adjustment motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming motors: 2x0.65 kW - CE marking - Lockable mains switch, emergency stop buttons - Main power: 380V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 and 5x Ø80 mm Spindles: 780 m³/h Trimming 360 m³/h Scrapers 2x360 m³/h Max. operational floor space: 10.80 x 2.40 m Transport dimensions (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and schematics. Gbedpfsrx S Ipex Abrsu