ES 750/150 HL

ENGEL

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 43.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 194413, vpenjalna sila: 2.200 kN, premer vijaka: 55 mm, delovna prostornina: 475 cm³, tlak vbrizgavanja: 1.578 letvica, injekcijska masa: 440 g, minimalna višina orodja: 300 mm, hod izmetalca: 180 mm, odmični hod: 750 mm, skupna masa: 12.740 kg, ogrevalna zmogljivost: 13,4 kW (18,22 KM), Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we are also interested in purchasing well-maintained injection moulding machines from year of manufacture 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Update - Tax Advice and Benefit for Used Machines: From 01/07/2025, used machines can also be considered for a special depreciation allowance of 30% per year under tax law. In addition to the lower price compared to a new machine, you can benefit from the same depreciation amounts as with a new machine. Keyword: Growth booster, (§ 7 paragraph 2 EStG-E) Manufacturer: Engel Type: VC 750 / 220 Control: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection unit Screw diameter: 55 mm Injection volume: 475 ccm Shot weight: 430 g Heating capacity: 13.4 kW Heating zones: 5 Nozzle stroke: 350 mm Injection pressure: 1179 bar – 1578 bar (boosted) Clamping unit Clamping force: 220 t / 2,200 kN Opening stroke: 757 mm Max. daylight: 1,050 mm Min. mould installation height: 300 mm Ejector stroke: 180 mm Lsdpfx Aboyc Ewxobohb Ejector force: 80 kN Weight: 12,740 kg Extras: Core pull The machine is in very good condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto the buyer's truck or free delivery within Germany against reimbursement of freight costs. For your information regarding the machines we offer and our company: - We only sell machines owned by us, purchased from ongoing production, from our Hanover warehouse - All machines offered are inspected and tested prior to removal - We do NOT sell insolvency assets - we are NOT brokers trading on behalf of third parties. - All machines offered originate from successful companies where maintenance and care are self-evident - All offered machines can be inspected at our warehouse

Leto izdelave: 2023, Stanje: novo, On-site nitrogen generation system for the production of a wide range of purities, pressures, and flow rates. The system is composed of high-quality components such as filters and adsorbers, a nitrogen separation unit from Parker Hannifin, and compressors from Kaeser. If high-pressure compression is required, we cooperate with Bauer Kompressoren. Over 400 such systems have been installed for our customers. Ledpfx Abenq Di Tjbjhb All systems are custom-assembled and adapted by us to your spatial requirements and operational needs. We also design and implement containerized systems for both indoor and outdoor installation. We look forward to your inquiries...

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, vpenjalna sila: 4.000 kN, Oprema: dokumentacija / priročnik, Vpenjalna sila: 400 t Premer polža: 70 mm Volumen brizganja: 1501 cm3 Tip: Horizontalni Pogon: Hidravlični Lhodpsyctyzsfx Abbjb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, vpenjalna sila: 1.100 kN, premer vijaka: 135 mm, This Engel Duo 11050/1100 WP was manufactured in 2004. It is a hydraulic injection moulding machine with a clamping force of 11,000 kN. Take advantage of this opportunity to purchase the Engel Duo 11050/1100 WP hydraulic injection moulding machine. Contact us for further information. Clamping Unit • Clamping force: 11,000 kN • Opening force (with pressure pad): 760 kN • Opening force: 615 kN • Opening stroke: 2,350 mm • Min. mould height: 700 mm • Max. mould height: 1,280 mm • Max. platen daylight: 3,050 mm • Platen size (horizontal × vertical): 2,340 × 2,040 mm • Tie bar spacing (horizontal × vertical): 1,575 × 1,320 mm • Tie bar diameter: 230 mm • Max. mould weight: 30,000 kg • Ejector stroke: 300 mm • Ejector force: 230 kN • Dry cycle (Euromap 6) - time: 5.2 s • Dry cycle (Euromap 6) - stroke: 1,100 mm Injection Unit 1 • Screw diameter: 135 mm • Dosing stroke: 570 mm • Max. shot volume: 8,159 cm³ • Max. screw speed: 120 rpm • Screw L/D ratio (3-zone): 20 • Plasticising rate (3-zone): 166 g/s • Screw L/D ratio (barrier): 22 • Plasticising rate (barrier): 256 g/s • Injection rate: 1,255 cm³/s • Injection rate at increased pressure: 915 cm³/s • Specific injection pressure: 1,170 bar • Specific injection pressure (increased): 1,600 bar • Nozzle stroke: 950 mm • Nozzle contact force: 150 kN • Heating capacity (standard): 93 kW • Number of heating zones incl. nozzle: 6 Lhsdpjx D Hd Iofx Abbsb • Pump drive power: 130 kW • Oil capacity: 1,600 l Weight: • Net weight (clamping unit / injection unit): 62 t / 18 t

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 500 mm, pomik po osi Z: 450 mm, hitrost vretena (min.): 16.000 obr/min, Stroj je v dobrem tehničnem stanju, - krmilni sistem Heidenhain TNC 426, zalogovnik za 20 HSK 63, vključno s sondo + 4. os. Lhodpfxexfg Aye Abbsb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Engel Insert 80V/80V/100 2F / 2-C Holm-free Machine, Vertical / Excellent Technical Condition Year of Manufacture: 2007 Injection Unit: Screw Diameter: 2 x 25 mm Shot Weight: approx. 49 g Injection Pressure: 1214 bar Dosage Volume: 54 ccm Clamping Unit: Clamping Force: 100 t Tie Bar Distance: 0x0 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: CC 200 Additional Equipment: Tie-barless machine with two vertical injection units, with rotary table Air valve x 6 Hydraulic core pull x 2 Control for hot runners x 12 Lsdpfoyctm Uox Abbjhb Infrared safety light curtains Both thermoplastic and rubber injection units available for this machine Rotary table diameter: 1200 mm The machine has been regularly serviced by Engel's authorized service in Germany Dimensions: Weight: 9400 kg Length/Width/Height: 4.85x1.47x2.30 m Drive: Pump/Motor: 30 kW Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Engel Victory 330/110 Tech / Production line with Engel ER-HLI 41 robot and conveyor belt / Machine in very good technical condition Year of manufacture: 2004 Injection Unit: Screw diameter: 40 mm Shot weight: 190 g Injection pressure: 1670 bar Dose volume: 201 ccm Clamping Unit: Clamping force: 110 t Tie bar spacing: 0x0 mm Platen size: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Lhedpfx Asyctmzjbbob Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core pull x 1 Injection unit hardened - bimetallic Machine has been serviced by authorized Engel service Machine with original safety enclosure for robot and conveyor Dimensions: Weight: 7400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pump/motor: 18.5 kW Heating power: 9.2 kW Total power: 27.7 kW All offered machines are started and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, Lifting capacity: 4,500 kg Overall height: 2,705 mm Lift height: 5,675 mm Mast type: Triplex Fork length: 2,400 mm Drive type: Electric Including fork positioner Including sideshift UVV inspection and maintenance newly performed Lhodpfx Aewvtf Sebbeb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Engel Victory 500/110 Tech Ecodrive with Sepro S5.15 Robot / Hybrid Machine / Operating hours: approx. in automatic mode Year of manufacture: 2017 Injection Unit: Screw diameter: 40 mm Shot weight: approx. 225 g Injection pressure: 2029 bar Dosage volume: 251 ccm Clamping Unit: Clamping force: 110 t Tie bar spacing: 0x0 mm Platen size: 740x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touchscreen Additional equipment: Machine in very good technical condition Tie-bar-less, hybrid machine: high-speed, energy-efficient and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 6 Control with hotrunner zones x 8 Injection unit hardened - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Sepro S5.15 robot Lhsdsyctmujpfx Abbeb Year of manufacture: 2016 5-axis robot: 3 axes driven by servo motors (electric); Axis A and C - pneumatic Touch control panel Robot with adapter and safety housing Robot purchase at extra charge Dimensions: Weight: 6,800 kg Length/Width/Height: 4.90x1.50x2.00 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company site in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Engel Victory 330H/200V/140 Combi Ecodrive / Production line with Sepro Multi Inject 20 robot / Operating hours: approx. 8,000 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 30 mm Shot weight: approx. 100 g Injection pressure: 2400 bar Plasticizing volume: 113 ccm Clamping unit: Lhodeyctmbepfx Abbsb Clamping force: 140 t Tie bar spacing: 0x0 mm Platen dimensions: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Tie-bar-less hybrid machine: energy-saving, high speed, very quiet Very good technical condition, machine operated in a certified cleanroom Operating hours: approx. 8,000 in automatic mode Total operating hours: 12,005 h Euromap 67 Robot interface Air valves x 6 Hydraulic core pull x 5 Control system with 16 hot runner zones Reinforced bimetallic injection units Main drives - 2x inverter-controlled servomotors Proportional valves on injection units – highly precise dosing Integrated system for pressure quality monitoring (Sensor Kistler) – mould cavity pressure measurement Screw diameter of vertical injection unit: ⌀25 mm – approx. 58 g / PS Optional: original Foboha rotary table available for additional price Rotary table diameter: 740 mm Both injection units can be retrofitted with alternative screw diameters (smaller/larger) Sepro Multi Inject 20 robot Year of manufacture: 2018 4-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B (rotation) Axis travels approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch-screen pendant control Robot safety package Robot with adapter and protective housing Robot can be bought for extra charge Dimensions: Weight: 10,300 kg L x W x H: 5.56 x 1.76 x 3.46 m All offered machines are started up and tested by our service technicians prior to sale. You can request a video showing technical testing of the selected machine, or participate in a live technical demonstration at our facility in Łódź. Price: On request

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 83.000 h, vpenjalna sila: 350 kN, premer vijaka: 25 mm, For sale is an injection moulding machine from the manufacturer Arburg, model 320S 350-60. Year of manufacture: 2000 Ledpjhhuq Ajfx Abbjhb Operating hours (automatic mode): 83,000 Screw diameter: 25 mm Clamping force: 350 kN Cylinder length: 60 Transport can be organised Europe-wide upon request and for an additional fee. Price incl. VAT Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE Are you looking for a high-quality yet cost-effective metalworking machine for your production? Or are you interested in selling your own? For further information or contact options, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Engel Victory 330H/200V/140 Combi Ecodrive / Production Line with Sepro Multi Inject 20 Robot / Operating hours: approx. 18,000 h in automatic mode Year of manufacture: 2017 Injection unit: Screw diameter: 30 mm Shot weight: approx. 100 g Injection pressure: 2400 bar Dosage volume: 113 ccm Clamping unit: Clamping force: 140 t Tie bar spacing: 0x0 mm Platen size: 750x750 mm Ejector: hydraulic Clamping system: hydraulic Control system: CC 300 - Touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-efficient, high-speed, and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total operating hours: 25,369 h Euromap 67 Lhodpsyctlqefx Abbob Robot interface 8x air valve 5x hydraulic core pull 16-zone hot runner control Reinforced injection units – bimetal Main drives - 2x servo motor with inverter control Proportional valves on injection units – precise dosing Parallel movements Integrated Kistler quality pressure control system – mould pressure measurement Screw diameter in vertical injection unit: ⌀25 mm – approx. 58 g/PS Option to purchase original Foboha rotary table at additional cost Rotary table diameter: 740 mm Sepro Multi Inject 20 Robot Year of manufacture: 2017 3-axis robot: All axes powered by servo motors (electric): X, Y, Z (telescopic) Axis strokes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touchscreen control panel Robot safety package Robot with adapter and protective housing Robot purchase available at additional cost Dimensions: Weight: 10,300 kg LxWxH: 5.56x1.76x3.46 m All machines offered are started up by our service technicians before sale. A video of the technical tests for the selected machine can be provided or you can participate in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Engel Victory 330H/80V/160 Combi Ecodrive / Production Line with Sepro SR S5-25 S3 Trans Robot / Operating Hours: approx. 18,000 h in automatic mode Year of manufacture: 2013 Injection Unit: Screw diameter: 30 mm Shot weight: approx. 100 g Injection pressure: 2,385 bar Plasticizing volume: 113 ccm Clamping Unit: Clamping force: 160 t Tie bar distance: 0x0 mm Platen size: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touchscreen Additional Equipment: 2K injection moulding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed, and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total hours: 24,312 h Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 5 Hot runner control x 16 Reinforced injection units – bimetallic Main motors - 2 x servo-driven, inverter-controlled Proportional valves on injection units - precise injection Lodpfxeyctk Hs Abbehb Screw diameter in vertical injection unit: ⌀22 mm – approx. 28 g/s Rotary table is optionally available Robot Sepro SR S5-25 S3 Trans Year of manufacture: 2013 3-axis robot: X, Y, Z (telescopic), all servo-driven (electric) Axis strokes approx.: X-2,000, Y-1,000, Z-1,500 mm Automatic axis lubrication Touch control panel Robot safety package Robot with adapter and protective housing Acquisition of the robot is possible at extra cost Dimensions: Weight: 8,700 kg Length/width/height: 5.35 x 1.76 x 3.42 m All offered machines are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2015, Used injection moulding machine directly from the manufacturer! As a manufacturer, KraussMaffei is offering one of our pre-owned injection moulding machines for sale. CONTROL SYSTEM - MC4 TECHNICAL DATA CLAMPING UNIT - Clamping force: 5000 kN - Tie bar spacing (h x v): 900 x 800 mm - Max. mould opening distance: 1170 mm - Min. mould installation height: 480 mm - Platen opening stroke: 1650 mm - Ejector stroke: 250 mm - Ejector force: 95 kN (Reverse: 48 kN) INJECTION UNIT - Screw diameter: 90 mm - L/D ratio: 20 - Injection pressure: 1742 bar - Injection volume: 1953 cm³ - Shot weight for PS: 1777 g - Injection rate: 649 cm³/s - Nozzle contact force: 115 kN Electrical Parameters - Pump drive power: 90 kW - Heating capacity: 44 kW Weight and Dimensions Lhjdonh Rnuspfx Abbob - Net weight: 25.8 t - Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m We generally deliver this system in a fully functional basic condition. As the original manufacturer, we can also offer various additional options depending on individual requirements, such as: - Upgrades for energy optimisation of the system - Integration with KraussMaffei digital products, if required - Plasticising unit conversions - Optional: Organisation and management of delivery (not included in the price) - Optional: Installation and commissioning (not included in the price) You benefit from our premium service and the option to purchase spare parts packages for wear components to ensure seamless operation of your newly acquired pre-owned system. Don't hesitate, contact us now for further information!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Engel e-max 440/180 / Electric Injection Moulding Machine Year of manufacture: 2009 Injection Unit: Screw diameter: 40 mm Shot weight: approx. 199 g Injection pressure: 1950 bar Dosing volume: 220 ccm Clamping Unit: Clamping force: 180 t Tie bar spacing: 520x520 mm Platen size: 760x775 mm Ejector: electric Clamping system: toggle lever Control: CC 200 - Touchscreen Additional Equipment: Machine in very good technical condition, operated in clean production environment Electric machine: high-speed, energy-efficient and very quiet Euromap 67 Robot interface Lhedpfx Absyctktjbsb Air valves x 3 Hardened injection unit – bimetallic Parallel movements Central lubrication Automatic mould height adjustment Kistler sensor – mould pressure regulation Original mould crane Dimensions: Weight: 7,200 kg Length/Width/Height: 5.87x1.42x2.00 m All machines offered are put into operation by our service technicians prior to sale. It is possible to obtain a video of the technical tests for the selected machine or participate in live technical demonstrations at our premises in Łódź. Price: On request