Trak za vlaganje

ENGEL

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 98.780 h, vpenjalna sila: 2.000 kN, skupna masa: 12.200 kg, proizvajalec krmilnikov: ENGEL, model krmilnika: CC100, This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie bar spacing of 920 x 750 mm. The machine is equipped with two injection units, screw diameters of 40 mm and 25 mm, and rotary table control. Take advantage of this opportunity to purchase this hydraulic injection molding machine Engel ES650H/200W-200HL-2F. Contact us for more information on this machine. • Clamping unit • Mold weight (max.): 1500 kg Hedpfsyf H Nnjx Abhsh • Moving total weight: 3000 kg • Minimum mold height: 550 mm • Mold opening stroke: 700 mm • Tie bar distance (H × V): 920 × 750 mm • Platen size: 1250 mm • Ejector stroke: 150 mm • Ejector force: 61 kN • Centering ring diameter, A-side: 110 mm • Centering ring diameter, B-side: 90 mm • Clamp system: Hydraulic / Pneumatic • Core pull control: Yes • Number of cores: 4 (A side) • Rotary table control: Yes • Index plate control: Yes • Injection unit 1 (main) - Type 650H • Max. shot volume: 200 cm³ • Stroke volume: 251 cm³ • Screw diameter: 40 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1930 bar • Injection rate: 142 g/s • Shot weight (PS): 216 g • Plasticizing rate: 26 g/s • Nozzle opening: 15 mm • Pump motor: 30 / 12.3 kW • Injection unit 2 (secondary) - Type 200W • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection rate: 104 g/s • Shot weight (PS): 60 g • Plasticizing rate: 12 g/s • Nozzle opening: 15 mm • Pump motor: ~6.8 kW • Machine axis travels • X-axis (injection unit): 500 mm • Y-axis (rotary table / mold carrier): 1000 mm • Z-axis (clamping unit): 1400 mm • Equipment and options (machine-integrated) • SPC / process control: Yes • Pressure interface: Yes • Second injection cylinder: Yes • Mold monitoring: No • Internal mold pressure sensor: p-θ-t-θ (Priam) • Hot runner control: 16 zones • Filter dryer: No • Special programs: Yes • Special option: GealanXcomp • Automation: No • Condition: • Well maintained and serviced Additional equipment • Engel linear extraction robot ERC 23/1-E (included)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 Robot – RC300 TECHNICAL DATA: Injection Unit: - Screw diameter: 135 mm - Screw stroke: 610 mm Hjdpfxsw Aw Tas Abheh - Injection volume: 8,731 cm³ - Shot weight (PS): 7,860 g - Screw speed: 125 rpm - Screw torque: 14,000 Nm - Max. screw torque (at reduced speed): 15,630 Nm - Plasticising rate (3-zone screw): 222.9 g/s - Plasticising rate (barrier screw): 279.2 g/s - Injection rate: 1,904 cm³/s - Plasticising pressure: 1,648 bar - Max. injection pressure: 2,000 bar - Nozzle stroke: 1,100 mm - Nozzle contact force: 210 kN - Material cylinder: L/D = 25 - Number of heating zones (incl. nozzle): 8 - Heating power: 88.5 kW Clamping Unit: - Clamping force: 20,000 kN - Minimum clamping force: 2,000 kN - Opening force with cushion: 1,600 kN - Opening stroke: 3,000 mm - Max. daylight between platens: 3,800 mm - Mould height: 800 – 1,800 mm - Tie bar spacing (H x V): 2,000 x 1,600 mm - Platen size (H x V): 2,700 x 2,430 mm - Max. mould weight (moving/fixed platen): 2 x 41,330 kg - Max. total mould weight: 62,000 kg - Dry cycle stroke (Euromap 6): 1,400 mm - Dry cycle time (Euromap 6): 5.5 s Ejector Unit: - Ejector stroke: 400 mm - Ejector force: 385 kN Drive and Cooling: - Installed power, main drives: 265 kW - Oil tank capacity: 1,600 l - Max. oil cooling capacity (at 25°C): 43.2 kW - Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 – RC300 Robot (2022): - Z-axis stroke: 4,280 mm - X-axis stroke: 1,800 mm - Y-axis stroke: 2,600 mm - Robot fully integrated with the machine – operated via machine control panel The machine is in excellent technical condition – latest generation ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, home appliances, technical). Still under power, test run possible. IMMEDIATELY AVAILABLE If interested, please contact us – we can provide more photos, a video of the machine in operation, technical documentation, and arrange a convenient viewing date.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, obratovalne ure: 63.929 h, vpenjalna sila: 2.000 kN, proizvajalec krmilnikov: ENGEL, model krmilnika: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in the year 2000. It features a clamping force of 2000 kN, a tie bar spacing of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with two injection units, hydraulic locking, and rotary table control, it ensures precise and efficient operation. If you are looking for a high-quality injection moulding machine, consider the Engel ES650H/200W-200HL-2F that we are offering for sale. Contact us for further information. • Condition: Well-maintained and serviced • Clamping Unit: • Mould weight: 1500 kg • Total weight: 3000 kg • Tie bar spacing (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (opening): 700 mm • Min. mould height: 450 mm • Max. mould height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Retraction force: not specified • Centering diameter (A-side): 110 mm • Centering diameter (B-side): 90 mm • Locking system: Hydraulic / pneumatic • Number of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection rate: 120 g/s • Plasticizing rate: 41 g/s • Nozzle opening: 15 mm • Installed pump: 30 / 12.3 kW • Injection unit 2 (200W): • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection rate: 60 g/s • Plasticizing rate: 12 g/s • Nozzle opening: 15 mm • Installed pump: ~6.8 kW • Controls and features: • SPC (Statistical Process Control): Yes • Printer interface: Yes • 2nd injection cylinder: Yes • Mould monitoring: No • Special programs: Yes Additional equipment • Extraction device (robot): ERC 23/1-E • Travel distances: X = 500 mm, Z = 1400 mm • Max. mould dimensions (Y-axis): 1000 mm Hedpoyf Htysfx Abhsh • Hot runner control: 18 zones • Mould sensor system: p-z-t-σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Engel duo 1800/500 eco drive Hjdpjw Hbylefx Abheh Zapiralna sila: 500 t Premer polža: 70 mm Volumen vbrizga: 1139 cm3 Vbrizgalni tlak: 1735 bar Razdalja med stebri V: 830 mm Razdalja med stebri H: 910 mm Tip: Horizontalen Pogon: Hidravlični CC300 krmiljenje Število ur: 38.000 Euromap 67 2 izvleka jedra Ecodrive 2 črpalki Hitro-vpenjalni sistem

Stanje: novo, Leto izdelave: 2024, ♻ Univerzalna uporaba (les razni, palete vključno z žeblji in Hodpfeiq U D Ejx Abhoh sponkami, iverne plošče in ostanki, furnirji, MDF-plošče, karton, plastika …) ✔ Moč: 30 kW ✔ Dolžina rotorja: 870 mm ✔ Premer rotorja: 270 mm ✔ Hitrost rotorja: 80-120 rpm ✔ Število nožev: 2x19 ✔ Granulacija: 10-50 mm ✔ Kapaciteta: do 7 m3/h* ✔ Odprtina za ekstrakcijo: 200 mm ✔ Vsipna odprtina: 1446 x 1565 mm ✔ Dimenzije D/Š/V: 2,15/1,97/2,04 m ✔ Teža: 2050 kg 2 leti garancije ali 2000 delovnih ur

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 96.194 h, vpenjalna sila: 2.000 kN, premer vijaka: 40 mm, injekcijska masa: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2,000 kN and a platen size of 920 x 760 mm. The machine is equipped with a two-component system with screw diameters of 40 mm and 25 mm, as well as an ERC 23/1-E robotic system for enhanced automation. Ideal for precision hydraulic injection molding. Contact us for further information about this machine. • Configuration: 2K (Two-component injection molding machine) • Clamping unit: • Platen dimensions (H x V): 920 x 760 mm Hedpfx Absyfrb Njhsh • Minimum mold height: 500 mm • Opening stroke: 750 mm • Maximum daylight (distance between platens): 1,150 mm • Maximum mold weight: 3,000 kg (1,500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1,946 bar • Shot volume (theoretical): 251 ccm • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm • Injection unit 2 (Secondary - 200W): • Screw diameter: 25 mm • Injection pressure: 2,089 bar • Shot volume (theoretical): 69 ccm • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/control: Printer interface; process control available Additional equipment • Robot system: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1,000 mm • Z-axis stroke: 1,600 mm • Hot runner control: 16 zones

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Zapiralna sila: 650 t Premer vijaka: 90 mm Razdalja med stebri V: 960 mm Razdalja med stebri H: 1100 mm Prostornina brizga: 2740 cm3 Tip: Horizontalen Pogon: Hidravlični VIPER 40 linearni robot na voljo Stroj ima približno 61.600 obratovalnih ur. 6 menjalnikov jeder na gibljivi plošči, Hodpfxsyfh I Ee Abheh 2 jedri in 4 kaskadni ventili na fiksni plošči.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Krauss Maffei Injection Moulding Machine KM 1600 – 17200 MX Year of manufacture: 2016 General Description: Modern injection moulding machine with a fully hydraulic clamping system. Equipped with the advanced MC6 control system, based on an industrial computer operating in real-time Ethernet technology. The system is operated via an integrated 19-inch control panel with a colour touchscreen, LED backlighting, and graphical visualisation of all active processes (ProcessDesigner module). Plasticising Unit: Complete system for thermoplastics processing Screw diameter: 135 mm Version with wear (abrasion) protection Non-return valve Open nozzle Technical Data: Clamping Unit: Clamping force: 16,000 kN Mould opening force: 1,120 kN Platen dimensions (W x H): 2550 x 2100 mm Tie bar clearance (W x H): 1870 x 1420 mm Opening stroke: 2700 mm Mould height (min.–max.): 700 – 1600 mm Max. daylight: 3400 mm Ejector stroke: 350 mm Ejector force (forward / backward): 300 / 150 kN Injection Unit: Screw diameter: 135 mm L/D ratio: 23 Injection pressure: 1784 bar Injection volume: 9662 cm³ Shot weight for PE: 6860 g Screw speed (nominal / max.): 81 / 100 rpm Electrical and Hydraulic Equipment: Main drive power: 160 kW Installed heater capacity: 93 kW Number of barrel heating zones: 7 Number of dry cycles according to EUROMAP 6: 648 / h Oil tank capacity: 2400 l Hjdpfxowyw Npe Abhoh Dimensions and Weight: Net weight with control cabinet: 92 t Machine dimensions (L x W x H): 14.17 x 4.04 x 2.93 m

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Machine: ENGEL VICTORY 500T / 7050 (Year of manufacture: 2017) Year: 2017 Control unit: CC300 Operating hours: 565 h Availability: Immediately Clamping Unit: Clamping force: 500 tonnes Opening stroke: 1100 mm Tie bar spacing: 1500 × 1285 mm Platen size: 1500 × 1285 mm Minimum mould height: 500 mm Maximum daylight (open distance): 1600 mm Injection Unit: Screw diameter: 120 mm Screw length (L/D): 22 D Shot volume: 5430 cm³ Maximum injection pressure: 1600 bar General data: Motor power: 98 kW Heating power: 30 kW Clamping unit weight: 31 tonnes Injection unit weight: 15 tonnes Machine dimensions (L × W × H): 10.50 m × 2.30 m × 2.30 m Options: Core pulls: 3 Robot interface: No Bimetallic screw/cylinder: Yes Other equipment: STAUBLI magnetic platens, 24 hot runner heating zones Hsdexvingjpfx Abhoh Note: The machine has very low operating hours (565 h) and belongs to the modern, tie-bar-less ENGEL Victory series, ideal for large moulds and high-precision production.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 73.437 h, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, skupna višina: 2.095 mm, skupna masa: 8.700 kg, največja dolžina izdelka: 5.155 mm, This Engel VICTORY 650/160 tech was manufactured in 2012. It features a tie-bar-less design that increases flexibility and accessibility for various mold sizes, with a clamping force of 1600 kN and a screw diameter of 45 mm. The machine is equipped with a robot, ensuring efficient automation. If you are looking for a high-quality injection moulding machine, you should consider the Engel VICTORY 650/160 tech we have for sale. Please contact us for further details on this machine. • Operating hours: 73,437 h • Condition: Excellent • Operational status: In production • Maximum injection volume: 318 cm³ • Minimum mould height: 292 mm • Maximum mould height: 900 mm • Platen opening stroke: 609 mm • Platen dimensions: 750 × 750 mm Hodpex Nr Hujfx Abhoh • Tie-bar spacing: Tie-bar-less • Motor power: 22 kW • Heating power: 13.35 kW • Number of electrical connector pins: 16 • Injection nozzle radius (tip): R35 • Centring ring diameter: 125 mm • Number of core pulls: 0 • Number of heating zones: 0 Additional Equipment • Robot included: Yes • Robot interface: Euromap 67

Stanje: dober (rabljeno), Leto izdelave: 2010, Conveyor belt, belt conveyor, transport belt, belt band conveyor, belt conveyor - Manufacturer: Transnorm, belt conveyor type 1100 - Speed: frequency controlled, up to 83.5 m/min Hjdsihc Uwjpfx Abhjh - Drive: SEW-Eurodrive 1.1/0.11 kW, see type plate photo - Brake: 10 Nm - Belt width: 600 mm - Conveyor length: approx. 7290 mm / approx. 780 mm height adjustable - Installation dimensions: 7290/860/H340 mm - Transport dimensions: 4230/860/H570 mm - Total weight: 358 kg

Leto izdelave: 2012, Stanje: pripravljen za uporabo (rabljen), premer vijaka: 55 mm, Ta Engel victory 750/160 Spex je bila izdelana leta 2012. Gre za hidravlični brizgalni stroj s potegom jedra, varovalom potisne plošče, 1/2'' zračnim ventilom in 10-kratnim razdelilnikom vode. Razmislite o priložnosti za nakup tega hidravličnega brizgalnega stroja Engel victory 750/160 Spex. Za več informacij nas kontaktirajte. • Na voljo 2 enoti • Stroj 1: 29.462 ur • Stroj 2: 28.713 ur • Poteg jedra • Varovalo potisne plošče Hedpfx Abox D I Egehsh • 1/2'' zračni ventil Dodatna oprema • 10-kratni razdelilnik vode

Leto izdelave: 2010, Stanje: pripravljen za uporabo (rabljen), premer vijaka: 55 mm, Ta Engel 750/160 Spex je bila izdelana leta 2010. Gre za hidravlično brizgalno stiskalnico s premerom polža 55 mm, vlekom jedra, zaščito izmetalne plošče ter 6-krakim razdelilnikom vode. Če iščete visokokakovostno brizgalno stiskalnico, razmislite o stroju Engel 750/160 Spex, ki ga imamo na voljo za prodajo. Za več informacij nas kontaktirajte. • Na voljo: 2 enoti • Obratovalne ure stroja 1: 35.066 h • Obratovalne ure stroja 2: 38.769 h Hsdpfx Ajx D I Eaobhsh • Vlek jedra • Zaščita izmetalne plošče • Zračni ventil 1/2" • Razdelilnik vode: 6-kraki

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, vpenjalna sila: 800 kN, premer vijaka: 25 mm, This Engel Insert 200V/60 rotary was manufactured in 2013. It is a vertical injection molding machine that offers a reliable solution for precision molding applications. Take advantage of the opportunity to purchase this Engel Insert 200V/60 rotary vertical injection molding machine. Contact us for further information. Screw diameter: 25 mm. 1.) Clamping Unit Clamping force: 600 kN Opening stroke: 338 mm Ejector stroke: 105 mm Hodpfx Abox D H Awshsh Ejector force: 20.1 kN 2.) Drive: Drive power of pump: 15 kW 3.) Injection Unit 1 Screw diameter: 22 mm 25 mm 30 mm 35 mm Max. shot volume: 53 cm³ (22 mm) 69 cm³ (25 mm) 99 cm³ (30 mm) 135 cm³ (35 mm) Max. screw speed: 480 rpm (for all diameters) Current screw speed: 480 rpm (for all diameters) Injection volume: 80 cm³/s (22 mm) 104 cm³/s (25 mm) 149 cm³/s (30 mm) 203 cm³/s (35 mm) Increased injection rate: 53 cm³/s (22 mm) 68 cm³/s (25 mm) 98 cm³/s (30 mm) 134 cm³/s (35 mm) Specific injection pressure: 2221 bar (22 mm) 2090 bar (25 mm) 1451 bar (30 mm) 1066 bar (35 mm) Increased specific injection pressure: 2402 bar (22 mm) 2404 bar (25 mm) 2205 bar (30 mm) 1620 bar (35 mm) Nozzle stroke: 530 mm Nozzle contact force: 28.3 kN