Stroj za brizganje

ENGEL ES 1350/250 HL-Victory

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 62.235 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 70 mm, skupna masa: 25.100 kg, The ENGEL Victory 2050/350 is a tie-bar-less injection moulding machine, manufactured in 2005. With a machine weight of 25,100 kg, it offers a maximum shot volume of 1,145 cm³ and a maximum injection pressure of 1,482 bar. The clamping force is 350 tonnes, and the screw diameter is 70 mm. Key technical data: - Year of manufacture: 2005 - Machine weight: 25,100 kg - Maximum shot volume: 1,145 cm³ - Maximum injection pressure: 1,482 bar - Clamping force: 350 t - Screw diameter: 70 mm - Mould installation height: 350–1,000 mm - Platen size: max. 1,200 x 1,100 mm - Ejector stroke: max. 250 mm - Control system: ENGEL - Total operating hours: 62,235 h - Additional equipment: - MORETTO Hopper Loader R10 C52 - ENGEL ERC linear handling system - Longitudinal arrangement - Extraction cell with machine enclosure - Carton board feed - Two-stage roller conveyor The tie-bar-less design of the ENGEL Victory series allows free access to the mould area, enabling the use of larger moulds on smaller machines and thus increasing efficiency. This layout also offers advantages for automation, as robots and peripheral equipment can be integrated more easily. The machine is equipped with the ENGEL control system, renowned for its intuitive operation and precise process management. The servo-hydraulic technology ensures energy-efficient operation and reduces cooling water requirements. Additionally, the machine is fitted with a MORETTO dosing unit and an ENGEL linear handling system, supporting production automation and increasing overall productivity. Njdpovxzw Nefx Agxowf With a total of 62,235 operating hours, the machine is in used but operational condition.

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), Clamping force: 2500 kN, clear tie bar spacing: 630 mm/630 mm, opening stroke: 1150 mm, minimum mold installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control system: MC4. Machine dimensions: 5700 mm / 2200 mm / 2300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8 hot runner controllers, 4 core pulls, blow-out unit, pressure accumulator, hydraulic tie bar withdrawal device, energy saving mode, ALS interface, 20 mA interface, and color dosing device interface. On-site inspection possible, documentation available. Nwedpfx Ajuiykdsgxef

Stanje: dober (rabljeno), Leto izdelave: 2004, VC330-80 plus Year: 2004 Clamping force : 800kn Injection Unit 330 Controll unit CC200 A01 Screw D40 Working hours 91112 1x corepull 4x digital input 4x digital output 1x signe pahse socket 1x trhee phase socket Nwodpfevdqbhex Agxof NEW PUMP

Stanje: rabljeno, Leto izdelave: 2001, Clamping force: 350 t Nwjdpfx Aova Ht Sogxef Platen dimensions: 1040 x 950 mm Tie bar spacing: 710 x 630 mm Screw diameter: 50 mm Shot weight: 400 g Shot volume: 442 cm³ Design: Horizontal Drive type: Hydraulic

Stanje: dober (rabljeno), Leto izdelave: 2005, obratovalne ure: 50.932 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.200 kN, premer vijaka: 45 mm, delovna prostornina: 318 cm³, injekcijska masa: 250 g, minimalna višina orodja: 300 mm, odmični hod: 500 mm, širina plošče: 740 mm, višina plošče: 470 mm, Stroj Engel VC 650/120 TECH v dobrem stanju. Trenutno ni priključen na elektriko, do 04/25 je bil še v proizvodnji. 1 vlečenje jedra AS, 12 integriranih HK con, brez robota. Ogled možen kadarkoli. Nwsdpfxox Ex Hte Agxsf

Stanje: rabljeno, Leto izdelave: 2005, Injection moulding machine Manufacturer: Krauss Maffei Model: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mould opening force: 220 kN Drive force moving platen: open: 105 kN close: 95 kN Clamping platen (W x H): 1,060 x 1,095 mm Clearance between tie bars (W x H): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould installation height: 380 mm Daylight opening: 1,300 mm Ejector stroke: 250 mm Ejector force forward/back: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Zoned cylinder heating: 6 zones Dry cycle time: 1,550 1/h Oil filling: 720 litres Dimensions and weights: Net weight (incl. control cabinet): approx. 16.0 t L/W/H: 6,510 x 2,040 x 2,380 mm Max. mould weight: 4,780 kg Injection unit: Shot capacity: 1,900 Screw diameter: 70 mm Injection pressure: 1,778 bar Injection volume: 1,047 cm³ Shot weight for PS: 953 g Injection flow rate: 527 cm³/s Screw speed Standard/Option: 285/349 rpm Screw drive Standard or Stage 1: 95 PS Screw drive Option or Stage 2: 117 PS Nozzle contact force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT colour screen and 3.5-inch floppy disk drive for data backup Plasticising: Nwsdpfxjxu Uvae Agxef 1 complete screw plasticising unit for thermoplastics, wear-resistant version, screw diameter 70 mm with non-return valve and open nozzle Nozzle radius: 15.00 mm Nozzle orifice: 6.00 mm 16426ä

Stanje: rabljeno, Leto izdelave: 1999, Technical details: Screw diameter: 45 mm Shot weight in polystyrene: 149 g/PS Nwjdpfx Aswvkgmegxof Clamping force: 1250 kN 9302423 INJECTION MOLDING MACHINE, DEMAG MATERIAL HANDLING, Year of manufacture: 1999 9307836 TEMPERING DEVICE, PIOVAN GMBH GARCHING, THW9, Year of manufacture: 2011 784065 TEMPERATURE CONTROL UNIT, PLASTIC SERVICE GMBH, HRS 24I, Year of manufacture: 2003

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Krauss Maffei KM 250 – 1900 C1 Injection Moulding Machine Year of manufacture: 2007 Control system: MC4 Operating hours: only 8,900! Clamping unit: Nsdow A N Hfjpfx Agxjwf Clamping force: 2,500 kN Max. mould opening force: 160 kN Moving platen traverse force – opening: 86 kN Moving platen traverse force – closing: 68 kN Mould platen dimensions (H × L): 995 × 1,050 mm Clearance between tie bars (H × W): 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight between platens: 1,150 mm Ejector stroke (hydraulic): 200 mm Ejector force (forward/back): 58 / 28 kN Injection unit: Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Injection weight (for PS): 953 g Injection rate: 400 cm³/s Screw speed (standard/option): 218 / 306 rpm Max. plasticising rate: 75 g/s Nozzle contact force: 110 kN Electro-hydraulic equipment: Pump motor power: 55 kW Installed heating power: 30 kW Number of heating zones (barrel): 6 Oil tank capacity: 720 l Dimensions and weight: Machine dimensions (L × W × H): approx. 6.21 × 2.04 × 2.39 m Total weight: 14,500 kg Max. mould weight: 3,430 kg Accessories and additional equipment: Oil tank Anti-vibration pads 3 × core pullers 8 × hot runner control zones 2 × air valves Robot interface conforming to Euromap 67 Additional information: Machine located in Poland Ready for collection Possibility to organise loading, transport, installation and commissioning

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 58.350 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 3.000 kN, premer vijaka: 60 mm, Clamping Unit: Clamping force: 3000 kN Maximum mold opening force: 160 kN Moving platen opening force: 86 kN Moving platen closing force: 68 kN Clamping platen size (H x V): 995 x 1050 mm Daylight opening (H x V): 630 x 630 mm Mold opening stroke: 820 mm Minimum mold height: 330 mm Maximum opening width: 1150 mm Ejector stroke: 200 mm Ejector force, forward/backward: 58 kN Injection Unit: Screw diameter: 60 mm L/D ratio: 21 Injection pressure: 2000 bar Shot volume: 679 ccm Shot weight (PS): 618 g Injection flow: 325 ccm/s Screw speed: 259 rpm Plasticizing capacity: 58 g/s Nozzle contact force: 110 kN Nsdpfxsw H Rvie Agxewf Electrohydraulic Equipment: Rated pump motor power: 45 kW Installed heating capacity: 23 kW Number of barrel heating control zones: 6 Oil filling capacity: 720 l Dimensions and Weights: Space requirement (approx.): 6.20 x 2.20 x 2.40 m Total weight: 14,370 kg Maximum mold weight: 3,430 kg Accessories: - Oscillating elements - 8-circuit water manifold Additional Equipment: - 1 x air valve - 2 x core pullers - 8 x hot runner controllers - Robot interface according to Euromap 12

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, obratovalne ure: 76.000 h, 1,0 kos rabljeni stroj za brizganje plastike Proizvajalec: KRAUSS MAFFEI Tip: KM300-1900C2 Nwsdoxyq S Uopfx Agxsf Leto izdelave: 2005 Zapiralna sila: 300 ton Razmik stebrov: 630 x 630 mm Premer polža: 60 mm Največja prostornina vbrizga: 754 cm³ Teža brizganega dela: 679 g/PS Krmiljenje: MC5 Oprema: 2x izvlek jedra Vmesnik za robota Merjenje notranjega tlaka orodja 24-consko upravljanje vročih kanalov Vmesnik za temperirno napravo Približno 76.000 obratovalnih ur