Stroj za brizganje

Engel DUO 5550/1100

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, ENGEL DUO 5550/1100 Injection Moulding Machine Year of manufacture: 2011 Injection Unit Two short-design injection cylinders for plasticizing. Direct screw drive; ceramic heaters on the cylinders. Standard screw geometry L/D = 22. Hardened and nitrided screw, diameter Ø 90 mm. Maximum injection volume: 2,740 cm³. Maximum shot weight (PS): 2,520 g. Open nozzle: front radius R = 35 mm, channel diameter Ø 6 mm, mounting thread M55×3. Increased specific injection pressure: 2,180 bar. Plasticizing throughput: 85 g/s (for polystyrene, screw Ø 90 mm). Injection unit equipment: M3-type cylinder – bimetallic, increased corrosion and wear resistance, permissible temperature up to 350°C. S4V-type screw – heat-treated, chrome-plated, with armoured edges, increased corrosion and wear resistance. Special screw geometry G11.3, optimized for the process. R12 non-return valve (multi-ball, recommended for PC, PMMA, ABS). Clamping Unit (Clamping System) Hydromechanical two-platen clamping system. Four short high-pressure cylinders on the nozzle side. Four tie-bar tensioners on the ejector side. Two fast-movement cylinders mounted diagonally within the clamping system. Mold opening stroke dependent on mold height (dynamic stroke adjustment). Moving platen guided on the machine frame – ensures platen rigidity and parallelism. Clamping force: 11,000 kN. Cjdpew U Taxjfx Aahjhb Mold mounting platen dimensions: 1,850 × 1,810 mm. Tie-bar spacing: 1,400 × 1,150 mm. Mold mounting height: 600–1,200 mm. Maximum opening stroke: 1,800 mm. Mold cooling system: 10 water circuits with rotameters (max. 30 l/min each). Special platen design with additional holes for ejector system in two arrangements (horizontal and vertical). Core Drives (Core Pull Units) Independent hydraulic core pull drives in the mold: 2 units on moving platen, 2 units on fixed platen. Hydraulic pressure reduction systems for core circuits. Independent pneumatic core pull drive on both moving and fixed platens. Hydraulics Pump station with electrohydraulic pressure and flow-controlled pumps and fixed displacement pumps. Energy-efficient proportional hydraulics with precise flow and pressure control. Servovalve for controlling injection speed, hold pressure, and back pressure. ECODRIVE system – energy-saving hydraulic drive enabling parallel auxiliary movements with minimal energy consumption. ENGEL Viper 40 Robot Integrated Cartesian robot, controlled from CC200/RC200 panel. Three servo-driven axes: X = 700 mm (extendable to 900 mm), Y = 1,000 mm (tandem up to 1,900 mm), Z = 1,880 mm (extendable to 5,720 mm). Payload up to 17 kg, accuracy ±0.05 mm. C axis: rotating gripper 0–90°, pneumatic drive. B axis: head rotation around lift axis (Y), servomotor drive, range +90° / –180°.

Stanje: rabljeno, Jeklena konstrukcija za dvigalne naprave Širina: približno 8,5 m Chodpjbruzgofx Aahob Dolžina: približno 7,95 m Naprava je razstavljena Naprava se prodaja »kot je«. Ogled: Vabimo vas, da si ogledate izdelek – preprosto nas kontaktirajte in se dogovorite za termin. Pozor: brez garancije, brez možnosti vračila ali zamenjave.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Injection Moulding Machine ENGEL DUO 5550/1100 Robot: ERC 200 Year of manufacture: 2010 Operating hours: approx. 79,000 h Clamping force: 1,100 tons Injection unit – 5550 Screw diameter: 90 mm Specific injection pressure: 2,180 bar Injection volume: 2,740 cm³ Screw L/D ratio: 22 Cylinder: Type M3, bimetallic – increased wear and corrosion resistance Screw: Type S4V, heat-treated, chrome-plated with hardened edges – high wear and corrosion resistance Clamping unit – DUO 1100 Clamping force: 1,100 tons Tie-bar spacing: 1,400 x 1,150 mm Mould height: from 600 mm to 1,200 mm Ejector stroke: 300 mm Equipment Hydraulic core pulls: 2+1 Pneumatic core pulls: 1+1 Heating zones GK: 3 x 8 = 24 zones Rotameters: 20 circuits Control system: CC 200 A02 Installed programs: - Micrograph Plus - Microplast - QDP - PD Graphics II Chodpow U Sz Iefx Aahjb Robot ERC 63/1-F, RC 200 X axis: 1,300 mm Y axis: 1,800 mm Z axis: up to 2,840 mm C axis: rotational movement 0–90° 2 vacuum circuits 1 pressurized circuit for sprue removal

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Clamping force: 600 kN, weight: 9 t, operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Cjdsh Nypfspfx Aahehb

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 23.905 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 600 kN, premer vijaka: 35 mm, delovna prostornina: 135 cm³, tlak vbrizgavanja: 2.221 letvica, odmični hod: 335 mm, skupna dolžina: 2.420 mm, skupna širina: 1.700 mm, skupna višina: 3.100 mm, skupna masa: 6.700 kg, Oprema: dokumentacija / priročnik, Prodajam vzdrževan stroj za brizganje ENGEL INSERT 200V/60 z le 23.905 delovnimi urami. Stroj je bil uporabljen izključno za vzorčenje. Ogled pod električnim tokom je možen kadarkoli! Tehnični podatki so vidni na slikah! Stroj je takoj na voljo! Cedsy Iwlaepfx Aahshb

Stanje: rabljeno, Machine designation: Dry bulk feeder Manufacturer: K-Tron / Coperion GmbH Model: K-ML-FB-130QC Year of manufacture: Unknown Rotational speed: Mixer speed: 5.6 rpm Capacity: 75 liters Drive motor: 0.25 kW – mixer drive 0.25 kW Dimensions: Length 800 mm x Width 700 mm x Height 1200 mm Empty weight: 100 kg Technical documentation: No Remarks: Mixer drive 0.25 kW, speed 5.6 rpm Condition: Used Price: On request Codpfjiv Ic Esx Aahehb

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: X82600, vpenjalna sila: 12.000 kN, premer vijaka: 150 mm, razmak između stupova: 1.200 mm, delovna prostornina: 12.193 cm³, tlak vbrizgavanja: 1.500 letvica, injekcijska masa: 11.584 g, odmični hod: 1.400 mm, Used Stork IMM 12000-19000 injection moulding machine. Chsdpfjwhkfysx Aahob

Stanje: potreben popravila (rabljeno), Stroj za brizganje plastike, Engel ES 330/85, Rabljeni stroj Kot je prikazano na slikah, je njegovo delovno stanje negotovo. Skupne dimenzije: 3100 x 1950 x 2600 mm Chedpfx Aaeukn S Hehjb Teža: 5500 kg Proizvajalec: Engel Tip: ES 330/85 Leto izdelave: 1997 Električni podatki: 380V, 60 A Krmilne kartice: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Engel ES 80/20 HL Clamping force: 20 tons Year of manufacture: 1999 Screw diameter: 22 mm Shot volume: 38 cm³ Enlarged platen Dimensions: 550 x 430 mm Csdpfxjlq Hyqe Aahjhb

Stanje: novo, Leto izdelave: 2022, stiskalna sila: 15 t, Single-column press – Manufacturer Hidrobrasil – 15 t C-frame press – Table 400 × 400 mm For sale is a hydraulic single-column press (C-frame type) from Hidrobrasil with a pressing force of up to 15 t. The machine is designed for continuous shift operation and is ideal for assembly, press-fitting, and light forming tasks in workshops and production. ==== Technical data & information: Hydraulic Single-Column Press – 15 t ==== General information - Manufacturer: Hidrobrasil - Model: Single-column press / C-frame press - Design: C-frame press / Single-column press - Pressing force: max. 15 t (150 kN) - Adjustable pressure range: 5 – 17 t - Machine weight: approx. 1.1 t - Dimensions (L × W × H): approx. 1,150 × 800 × 1,900 mm - Table height: 850 mm - Operator sides: 1 ==== Working area - Max. daylight opening: 400 mm - Stroke: 350 mm ==== Table & Ram - Table plate: 400 × 400 mm - Ram plate: 200 × 200 mm - Design: with T-slots and central cylinder clamping ==== Speeds - Approach speed: 10 mm/s - Return speed: up to 25 mm/s - Pressing speed: 0 – 10 mm/s ==== Hydraulics Chodpfx Aoitylgjaheb - Number of cylinders: 1 - Max. operating pressure: 290 bar - Pressure accuracy: ± 5 bar - Pump: gear pump, approx. 9 l/min - Oil volume: approx. 80 l (HLP 46) - Max. oil temperature: 55 °C - Max. ambient temperature: 40 °C ==== Drive & Electrical - Motor power: 3 kW - Total connected load: approx. 5 kW - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz ==== Equipment & Operation - Pressure setting via rotary controller - Manual control lever with two speeds - Oil temperature gauge - Control cabinet supply: 3,000 mm cable with 16 A plug - Machine body powder-coated / double painted ==== Control Cabinet - Protection class: IP54 - Spare space: approx. 20 % - Cooling: no - Interior lighting: no - Operating mode selector: lockable ==== Construction & Safety - Design as oil-hydraulic single-column press - Complies with current UVV and EU machinery directives ===== Assembly work, press-fitting, small batch production, workshop applications, light forming technology Single-column press, C-frame press, hydraulic press, workshop press, press-fit press, industrial press, tool-matching press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to the German Machinery Directive, as well as the European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they comply with all aspects of the Brazilian national safety guideline NR 12, which is based on these standards. Our core strengths are special-purpose machine construction and press automation. We offer customized hydraulic presses at surprisingly competitive prices. Leading European manufacturer components are predominantly used for the hydraulics of our presses.