Presejalni obrat

Enders stationäre Siebanlage

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GG520A-17518 & GG502S-16471, skupna širina: 5.100 mm, skupna dolžina: 5.350 mm, skupna višina: 1.500 mm, skupna masa: 3.250 kg, vrsta vhodnega toka: trifazni, vhodna frekvenca: 50 Hz, pritisk: 8 letvica, dolžina rezanja (maks.): 3.700 mm, Maksimalna mera: 3210 mm Minimalna mera: 150 mm Maksimalna dolžina reza: 3700 mm Minimalna dolžina reza: 250 mm Bwedpfx Afjycgiio Djn Monolitno: 3 - 10 mm Laminirano: 2+0,38+2 (22-1) minimum 8+4,56+8 (88-12) maksimum Največja teža stekla pri nakladanju/razkladanju na rokah: 450 kg

Leto izdelave: 2016, stanje: rabljeno, MEP rezalni in upogibni stroj, SYNTAX 28 Bwjdpfxjxl Avve Af Djn Enojna palica: Ø10 - Ø28 mm (#3 - #8) Dvojne palice: do Ø20 mm (#6) • Detektor prisotnosti palice • Večnamenski podajalni sistem: čeljust in podajalni valji • Dvojne škarje • Upogibni zatiči v skladu z mednarodnimi standardi Opomba: Ta video je promocijska predstavitev proizvajalca za model SYNTAX 28. Ne prikazuje specifične linije, ki je trenutno naprodaj. Enojna palica: ∅10 - ∅28 mm (#3 - #8) Dvojne palice: do ∅20 mm (#6)

Stanje: novo, Leto izdelave: 2024, New Aurepa ADR tank trailer, gas, oxygen, nitrogen, argon, CRYOBASE Trailer for liquid nitrogen, liquid oxygen, liquid argon, gas, cryogenics Bsdpfx Aet R R Uqof Down New trailer: Year of manufacture: 2024, Germany All documents available Used tank: Working pressure: 3.85 bar Capacity: 2000 L We also have other tankers available for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, hydrogen, methane. We are happy to prepare an offer for you or provide further information.

Stanje: rabljeno, prevoženi kilometri: 835.837 km, moč: 309 kW (420,12 KM), prva registracija: 11/2010, vrsta goriva: dizel, lastna masa: 9.580 kg, največja dovoljena obremenitev: 16.420 kg, skupna masa: 26.000 kg, velikost pnevmatike: 315/80R22.5, konfiguracija osi: 6x2, medosna razdalja: 4.800 mm, gorivo: dizel, zavore: intarder, barva: rumena, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: drugo, število sedežev: 2, skupna dolžina: 9.480 mm, Leto izdelave: 2010, gradbena višina: 3.850 mm, število postelj: 1, Oprema: ABS, klimatska naprava, nadzor oprijema, računalnik na krovu, spojka prikolice, tempomat, The Iveco STRALIS AS 260 S42 Y/FS-CM is a versatile, pre-owned truck, ideal for commercial use or export. First registered in November 2010 and with a mileage of 835,837 km, this vehicle is powered by a robust diesel engine delivering 309 kW (420 hp) and meeting Euro 5 emission standards. Equipped with an automatic transmission and a steerable/liftable axle, the STRALIS offers excellent maneuverability and versatile operation. The vehicle features a distinctive yellow metallic paint finish. With an overall height of 3,850 mm, width of 2,550 mm, and length of 9,480 mm, it is designed for heavy-duty transport and has a permissible total weight of 26,000 kg. The specification includes two doors and two seats, air conditioning, and an INTARDER braking system for additional safety. The truck is registered as a commercial vehicle and has a green emissions badge (Euro 4), allowing access to low-emission zones. With only one previous owner and regular maintenance, the STRALIS is ready for high-performance applications. Steerable/lift axle Bsdpfxsr Uzgcj Af Djwn Sale only to businesses (agriculture, freelancers, small and large enterprises) or for export. Subject to prior sale and errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, leto zadnje generalne obnove: 2025, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Bedpjvf E Avsfx Af Djwn Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Winch incl. Lifting capacity max. 2 t at 2.7 meters Bodpfoq N E U Asx Af Dswn Lifting capacity max. 1 ton at 5.3 meters Operating hours: 270 h Electric: yes

Leto izdelave: 1963, stanje: pripravljen za uporabo (rabljen), Load capacity: 18 t, lifting height: 10,750 mm, span: 23,000 mm, weight: 35.1 t. The machine has been regularly serviced and inspected. Bodpfoh I Edvox Af Down

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 525.000 km, moč: 375 kW (509,86 KM), prva registracija: 09/2014, vrsta goriva: dizel, velikost pnevmatike: 385 65 R 22.5, konfiguracija osi: 6x2, gorivo: dizel, kapaciteta rezervoarja za gorivo: 580 l, zavore: zaviranje z motorjem, barva: rumena, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, skupna dolžina: 7.090 mm, skupna širina: 2.550 mm, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 13.000 kg, dovoljena osna obremenitev (os 3): 13.000 kg, Leto izdelave: 2014, Oprema: ABS, drugi rezervoar za gorivo, klimatska naprava, tempomat, = Dodatne možnosti in oprema = - Servoojačevalnik zavor - Hladilnik - Radio/CD predvajalnik - Spalna kabina - Senčnik - Škatla za orodje = Dodatne informacije = Menjalnik Menjalnik: Mercedes Powershift 3, avtomatski Konfiguracija osi Sprednja os: Dimenzija pnevmatik: 385/65 R 22.5; Največja obremenitev osi: 9000 kg; Krmiljena; Vzmetenje: listnato vzmetenje Bodpfx Afouu Hc Ee Djwn Zadnja os 1: Dimenzija pnevmatik: 315/70 R 22.5; Dvojna montaža; Največja obremenitev osi: 13000 kg; Vzmetenje: zračno vzmetenje Zadnja os 2: Dimenzija pnevmatik: 315/70 R 22.5; Dvojna montaža; Največja obremenitev osi: 13000 kg; Vzmetenje: zračno vzmetenje Teže Lastna teža: 10.705 kg Nosilnost: 68.000 kg Skupna dovoljena masa: 33.000 kg Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Poškodbe: nobene Finančne informacije Cena: na zahtevo

Leto izdelave: 2004, stanje: dober (rabljeno), Atlas Copco XAS 67 Compressor Output: 3.7 m³/min Operating hours: 2,371 h Deutz engine Bjdpfx Afoiywpzo Djwn Type: Diesel

Stanje: rabljeno, prevoženi kilometri: 227.566 km, moč: 130 kW (176,75 KM), prva registracija: 05/2012, vrsta goriva: dizel, lastna masa: 6.390 kg, največja dovoljena obremenitev: 6.110 kg, skupna masa: 12.500 kg, konfiguracija osi: 4x4, medosna razdalja: 3.050 mm, gorivo: dizel, voznikova kabina: drugo, vrsta prenosa: drugo, emisijski razred: Euro 5, vzmetenje: drugo, število sedežev: 2, skupna dolžina: 5.100 mm, dolžina tovornega prostora: 2.650 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 4.000 mm, Leto izdelave: 2012, obratovalne ure: 16.641 h, gradbena višina: 3.360 mm, Oprema: hidravlika, klimatska naprava, pogon na vsa štiri kolesa, računalnik na krovu, spojka prikolice, The Unimog U400 405/12 impresses with its versatility and robustness, making it ideal for use in agriculture and construction. Powered by a high-performance 4,249 cc diesel engine producing 177 hp and compliant with Euro 5 emissions standards, it meets modern environmental requirements. With a total mileage of 227,566 km and 16,641 operating hours, the vehicle is in good condition. The Unimog comes equipped with a trailer hitch, air conditioning, a front PTO, and municipal hydraulics to support flexible attachment options. The vehicle was manufactured in 2012 and has had only one previous owner. Despite its compact dimensions—3,360 mm in height, 2,360 mm in width, and 5,100 mm in length—it offers an impressive payload with a permissible gross weight of 12,500 kg. The Unimog has a green emissions sticker, allowing use in urban low-emission zones. Operating hours: 16,641 h Bjdpfx Ajr Uzthsf Down Sale only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Subject to prior sale and errors excepted.