Vertikalni obdelovalni center

Emmegi Comet Isola

Stanje: pripravljen za uporabo (rabljen), Tehnične specifikacije Ljdpfxsundg Ue Adkeri PREMIKI OSI X OS (vzdolžna) (mm): 4300 Y OS (prečna) (mm): 270 Z OS (vertikalna) (mm): 300 ELEKTROVRETENO Največja nazivna moč (S1) (kW): 5,5 Največja moč Največja hitrost (vrt/min): 20000 Orodni nosilec: HSK 63F AVTOMATSKI MENJALNIK ORODIJ Največje število orodij v magazinu: 4 (standardno) Največje število kotnih glave, ki jih je možno naložiti v orodni magazin: 2 Največji premer žaginega lista, ki ga je možno naložiti v orodni magazin (mm): Ø 180 FUNKCIJE Večkosovna obdelava OBDELOVALNE POVRŠINE Z ravnim orodjem (zgornja površina): 1 S kotno glavo (bočne površine in konci): 2 + 2 Z žaginim orodjem (bočne površine in konci): 2 + 2 NAVOJENJE (z navojnim utorom za aluminij in skozi izvrtino) S kompenzacijskim vpenjalom: M8 Rigidno VPENJANJE OBDELOVANCEV Standardno število primežev: 4 Največje število primežev: 6 Električna napeljava in motorji Priklop: Trifazni Skupne dimenzije Dolžina: 5000 mm Širina: 1300 mm Teža: 2000 kg

Stanje: novo, Saw blade diameter: 420 x Ø 40 mm Cutting diameter: 170 mm Cutting length: 410 mm Saw blade dimensions: 420x3.2/2.4x40 mm Speed: 3500 rpm Extraction port diameter: 100 mm Total power requirement: 3.0 kW Lrodexabztjpfx Adkoi Machine weight: approx. 120 kg Space requirement: approx. 1300 x 800 x 1600 mm - Crosscut and miter circular saws for cutoff cuts * Drive motor 3.0 kW - 400 Volt - Dual-sided miter adjustment (60° / 45°) with fixed stops - Compound cut 45° on both sides with fixed stops - Robust grey cast iron construction - Precision linear ball bearing guide for tool carriage on hardened and ground steel shafts - Manual saw feed - Infinitely variable saw blade height adjustment - Connection stub for optional dust extraction Cutting data: - Cutting length at 90° = 410 mm - Cutting height at 90° = 170 mm - Cutting length at 45° = 290 mm - Cutting height at 45° = 115 mm Special accessories included: - Compound cut setting via hand crank, adjustable on both sides (45°/45°) - Carbide-tipped circular saw blade 420x3.2/2.6x40 mm * Z = 108 FTZ negative for aluminum and plastic - Infinitely adjustable hydraulic feed brake - Pneumatic material clamping from above, consisting of: * 2 adjustable vertical clamping cylinders with hand lever valve - 1x machine stand - More powerful drive motor (3.0 kW)

Stanje: dober (rabljeno), Leto izdelave: 2009, Elumatec SBZ 140 Long version: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light barriers Automatic clamp detection Central lubrication Cooling spray system Chip trolley Conditioning unit Max. spindle speed: 24,000 rpm Tool holder: HSK-63F mount, 8-position automatic tool changer. Max. milling diameter: 80 mm Max. saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining centre (axes: X, Y, Z + A). It is designed for aluminium and thin-walled steel profiles. 4-axis CNC machining centre (X/Y/Z + tilting/rotating axis A) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis travel speed: X-axis up to approx. 65 m/min, Y and Z axes up to approx. 60 m/min (depending on configuration) Control: 4-axis CNC control system with PC operation, colour display, USB & network. Software: eluCam. Automatic material clamps, automatic positioning via locating pins Pendulum/shuttle operation (two work zones) improves production throughput. Besides milling and drilling, also tapping, sawing, profile machining—all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The displayed price is exclusive of VAT (VAT deductible for businesses). Lrodsx E Ahzopfx Adkji

Leto izdelave: 2012, stanje: pripravljen za uporabo (rabljen), A Schüco profile workbench for sash hardware assembly is available. Assembly capacity: approx. 6–8 sashes/day, hardware: Schüco AvanTec, minimum pressure: 0.7 MPa, maximum air flow rate: 20 l/min, machine weight: approx. 1200 kg. An on-site inspection is possible. Ledpfjwwlk Nex Adkjri

Stanje: rabljeno, Stop for mitre saw, crosscut saw, stop and measuring system Lodpfjinwuqox Adkeri - Manufacturer: elumatec, stop and measuring system with digital display - Mounting: Bosch profile - Length measuring unit: 4280 mm - Price: complete - Dimensions: 4710/510/H635 mm - Weight: 72 kg

Leto izdelave: 2014, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Mobilni sesalnik za ostružke MG4, z zvočno izolacijo in samodejnim zagonom. Antistatični filter, primeren za sesanje ostružkov aluminija, PVC-ja in jekla. Samodejno čiščenje filtra ter enostavno praznjenje posode za ostružke zahvaljujoč kolesom. Različica VP ima krmilno omarico s prostonapetostnim kontaktom za zunanjo upravljanje s strani stroja. Sprednji sesalni sistem sestavljata dve sesalni šobi iz litega aluminija s premerom 100 mm. Te omogočajo večkratno priključitev preko plastičnih cevi z ojačitvijo iz kovine na odsesovalne naprave, nameščene na rezalne stroje, žagarske centre, obdelovalne centre in PVC-stroje. Lodpfx Adoycgtbjkjri Med dodatno opremo so priključki za zmanjšanje na 70 mm, Y-spojka in približno 14 m posebne sesalne cevi. (Popolno pripravljeno za uporabo z dvojnim kotnim žagalnikom Emmegi)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2018, premer žaginega lista: 550.500 mm, Machine in perfect technical condition. Very little used. Designed for processing aluminium and PVC profiles. Mitre cuts possible at 3 levels and can be used as a splitting saw; manual adjustment of the horizontal saw blade by up to 20 mm in front of the vertical saw blade. Cutting options: rectangular, single-sided mitre, double-sided mitre, and three-sided mitre. Profile machining up to 300 mm, width up to 90°, mitre angles up to 30°. Notch depth horizontally up to 185 mm, vertically up to 210 mm at 90°. Cutting width at 90°: 300 mm, profile height: 280 mm. Manual adjustment of cut and height, positioning via mechanical digital displays. Lrsdpfjvtarnjx Adkji Vertical saw blade swivel range: 30° – 90° – 30° (front/center/rear), manual, positioning with digital display. Material stop (tabletop) can be manually rotated left and right within 30° - 90° - 30°, positioning via measurement scale. Material depth stop adjustable manually using a sliding carriage and manual clamp, positioned with a digital display.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, številka stroja/vozila: 506093, ITALMAC Pegaso 5-osni obdelovalni center Lrjdpfjtrvmvox Adkoi

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Polavtomatski dvoglavi rezalni stroj za aluminijaste/PVC profile. Zelo dobro ohranjen, v proizvodnji. Lredpeygwt Hjfx Adksi

Stanje: rabljeno, Leto izdelave: 2019, ELUMATEC - SBZ 140 ELUCAM - 2019 - 4 osi - Premiki X/Y/Z = 7400-7600/850/650 mm - Osa A 0-180 stopinj - Hitri premiki 60-65 m/min - Vreteno 24000 RPM, 11 kW S1 - ATC z 8 pozicijami Ljdpfjyl Shvex Adksri - 2442 ur rezanja vretena - Pod napetostjo - Zelo dobro stanje