Obdelovalni center Emmegi Comet E Pendolare

Emmegi Comet E Pendolare

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar diameter of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with 2 high-performance spindles with a 66 mm bar capacity, 2 turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis for both upper and lower turret. A 35-bar high-pressure coolant system with filtration and an additional tank is included. Please refer to the attached brochure for further details or contact us directly. Equipment: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Coolant washing nozzle - TA/06000/10 coolant chiller, 8000 W - Machine status light - Tool life management - Tool load monitoring - Programmable automatic part catcher (pneumatic) - The parts extractor is equipped with a pneumatic gripper for part removal (opens and closes pneumatically) - Pneumatic ejector for sub spindle with 100 mm adjustable stroke, end position detected by sensor Kljdpfx Aasxmhdnjcjn - Coolant supply through right-hand spindle - Interface for bar loader (unimag) - Preparation for extraction unit, connection flange Ø100 The machine is supplied with chip conveyor, coolant unit and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information available on request.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machinable length: 200 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 1.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 10 - Number of driven positions: 5 - Driven tool speed: 5,000 [rpm] Ksdpfxsuhazgj Aacoln FRONT TOOL POST - Number of positions: 4 SUB OPERATIONS - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Footprint: 2,110 x 1,085 [mm] - Machine height: 1,832 [mm] - Machine weight: 2,200 [kg] MACHINE HOURS - Operating hours: 32,264 [h] ACCESSORIES - Controller: Meldas - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: FMB MINIMAG 20

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25.12.15, Fresan FP 100P - C-frame Eccentric Press - 100 Tons (1000kN) TECHNICAL DATA: * Capacity: 100 tons (1000kN) * Strokes per minute: 60 (adjustable) * Distance between table and ram: 445 mm * Stroke adjustment: 0 - 132 mm * Ram adjustment: 95 mm (motorized) * Table dimensions: 700 x 1000 mm Kodonxh T Repfx Aacoln STANDARD SPECIFICATIONS: * Equipment compliant with CE regulations * Welded steel frame construction * Crankshaft made from alloy steel AISI 4140 (42CrMo4). Extremely durable and ductile. CNC-ground for minimal surface friction. * Bronze bearings, grade SnBz-12 * Pneumatic clutch-brake combination * Completely enclosed, helical-geared gearbox in oil bath * Press safety valve * Safety PLC & safety switches & light curtains (Pilz) * 6-way ram guidance with used-oil collector * 7-inch HMI touchscreen control panel * Adjustable stroke rate with AC inverter * Motorized ram adjustment * Mechanical overload protection (Hydraulic protection can be retrofitted to a standard machine) * Pneumatic counterbalance cylinders (ISO, 4 units) * Automatic central lubrication & used-oil collector (thin oil / slideway oil) OPTIONAL EQUIPMENT: * Extra clamping plate * Parts ejector (upper and/or lower; mechanical or pneumatic) * Material feed, loading and unloading systems (decoiler, recoiler, straightener, pneumatic or servo feeder) * Customized machine

Leto izdelave: 2007, Stanje: zelo dobro (rabljeno), Inline blik-/pottenwasmachine & droger Klodpsh Eazzefx Aacen Volledig roestvrij staal Voor containers tot maximaal 180 mm breed en 250 mm hoog Wordt geleverd in huidige staat of Getest en aangepast aan klantspecificaties

Stanje: rabljeno, Leto izdelave: 1969, Wheel diameter - max. 160,175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Centre distance between centres 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Axis distance between cutter and workpiece - max. 138 mm Axis distance between cutter and workpiece - min. 30 mm Milling head - swivelling 120° Cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Kjdovzhf Sjpfx Aacjln Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 650 mm, pomik po osi Z: 550 mm, največja hitrost vrtenja: 12.000 obr/min, skupna masa: 7.500 kg, For sale: CNC 5-axis machining center, brand DMG, model DMU 60 P The machine is fully functional and ready for immediate use. In 2021, a new spindle was installed and all maintenance work has been carried out. History: 2019: New ball screw (KGT) Klodjwbhq Hepfx Aacjn 2021: New spindle 2022: Single-shift operation 2023: Occasional job orders 2024: Taken out of operation but still connected to the power supply 12/2025: Disassembled, cleaned, and placed into storage Technical data: X-axis travel: 600 mm y-axis travel: 650 mm z-axis travel: 550 mm Control system: Heidenhain TNC 426 Spindle speed range: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool stations: 60 positions Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed speed: 20 - 10,000 mm/min Total power requirement: 44 kVA Space requirement approx.: 7.0 x 6.0 x 2.7 m Machine weight approx.: 7.5 t No chucks or vices are included in the offer. Transport and loading can be organized throughout Europe upon request and for an additional charge. Prices are quoted plus VAT. Viewing by appointment is possible. Contact us—our team will be pleased to assist you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell your machine? For further information or to contact us, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, DOOSAN PUMA 400LMA FANUC 32i (Jahr 2011) HAUPTSPEZIFIKATIONEN: - CNC FANUC 32i mit 10,4” LCD-Farbdisplay und Manual Guide - Umlaufdurchmesser über Bett: 770 mm - Umlaufdurchmesser über Schlitten: 590 mm - Max. Drehdurchmesser: 560 mm - Max. Drehlänge: 2.064 mm - X/Z-Verfahrwege: 357 mm / 2.155 mm - Stangendurchlass: 90 mm - Hydraulisches Spannfutter Durchmesser 400 mm - Spindel: 22 kW / 3.000 U/min (ASA A2-8) - BMT 75P Revolver mit 12 Stationen und angetriebenen Werkzeugen - Angetriebene Werkzeuge: 7,5 kW 3.000 U/min INKLUSIVE AUSSTATTUNG: - S-HS-12 Hydraulikspannfutter Durchmesser 305 mm mit Backensatz - C-Achse 360º (0,001º) - Automatischer Werkzeugvermesser - Programmierbarer Reitstock - Hochdruckpumpe 14,6 bar - Späneförderer - Vorbereitung für hydraulische Lünette (Sockel, Logik, Hydraulik) - SMW SLU X-4-ZS Hydraulik-Lünette Durchmesser 30-245 mm - Komplettes Halterset mit 4 Innen-, 4 Außen- und 4 angetriebenen (2 winkel- und 2 gerade)* Kedoyb Sqpjpfx Aacjln - Satz Handbücher und Dokumentation ZUSTAND: Maschine in EXZELLENTEM Zustand, unter Strom in Barcelona zur Besichtigung.

Stanje: dober (rabljeno), Leto izdelave: 2000, Težki stružnica ERNAULT SOMUA P72 s tremi vodili Ksdpfx Ajxq D Tysacsln premer nad ležiščem 2200 mm premer nad vozičkom 2000 mm hitrost 1,5 do 3000 obr/min - 75 KM teža stroja 39 t dovoljeno breme 16 t stroj si je mogoče ogledati v delovanju

Stanje: rabljeno, TECHNIČNI PODATKI MIZA - Velikost mize: 3100/800 [mm] - Najv. obremenitev mize: 7000 [kg] - Hodi osi X/Y/Z: 3000/1000/1200 [mm] - Hitrost hitrih pomikov (X/Y/Z): 15000/15000/15000 [mm/min] REZKALNA GLAVA Kjdow Tnhbopfx Aacjln Ročna glava REZKALNO VRETENO - Vpenjanje orodja: ISO50 - Hitrost vrtenja vretena: 4000 [obr/min] - Moč pogona vretena: 27 [kW] MENJEVALEC ORODIJ - Tip menjalca: Parapluie - Število orodij v zalogi: 24 TEŽA IN DIMENZIJE - Potrebni prostor: 7913/5043 [mm] - Višina stroja: 3440 [mm] - Teža stroja: 13410 [kg] ELEKTRIČNO NAPAJANJE - Napetost: 400 [V] - Skupna moč pogona: 38 [kW] DELAVNI ČAS - Ure pod napetostjo: 24689 [ur] - Delovne ure: 23809 [ur] - Ure vretena: 7658 [ur] OPREMA - Krmiljenje: Heidenhain iTNC530 - Elektronski ročni volan - Vmesnik: RS232/RJ45/USB - Teach-in programiranje - Rezervoar za hladilno tekočino - Držalo za orodje

Stanje: rabljeno, Pomik osi X: 1250 mm Pomik osi Y: 1100 mm Klsdpfx Ajx Dz Rcjacjn Pomik osi Z: 900 mm Izvlek vretena (W): 710 mm Os B: 360° Vpenjalna dimenzija mize: 1000x1120 mm Maks. obremenitev mize: 3000 kg Konus vretena: ISO 50 Število vrtljajev vretena: 2500 /min Moč glavnega elektromotorja: 20 kW Skupne dimenzije stroja DxŠxV: 6130x3600x2750 mm Skupna masa stroja: 12400 kg Krmilni sistem: Heidenhain iTNC 530 Dodatki: kabina za upravljavca, ohišje stroja, merilna sonda TS 460, držala za orodje Število ur na vretenu: 8500