Dvoglava kotna žaga Emmegi Classic Magic 500 TU/5

Emmegi Classic Magic 500 TU/5

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.935 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It offers a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip extraction, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 that we have for sale. Contact us for more information. Work Table and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of panel holders and sliding rails (EPS X-Y) Kedpfx Ajx D H Hcei Nedp • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right) with pneumatic system • 4 removable middle stops, stroke 140 mm (2 left + 2 right) with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Machining Units and Configuration • C3-A1 composition: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a working unit with 5 interpolating axes (units only usable when the electric spindle is vertical) • C3-P2 composition: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, located in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for chips and scrap (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical specifications and descriptions are taken from the original order confirmation and are for informational purposes only; they are not binding.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Schiavo Hydro 3000.6 Vertical glass washing machine with pre-wash zone, main washing zone, and drying zone. Wet zone is largely made of stainless steel and moisture-resistant materials. 150 mm one-piece washing brushes with stainless steel core. Including water tanks for water treatment. Including fan for glass drying. Outfeed zone with inspection lamps. Processing dimensions: Max. glass height: 3,000 mm Kodswd N Urepfx Ai Njdp Glass thickness: 3–22 mm Brushes: 6 units Connected load: 22 kW

Stanje: rabljeno, Leto izdelave: 2018, Delivery time approx. 5 months. Machine from school operation – TOP condition, low hours (edge banding unit unused). Without tools. Plus dismantling / delivery / installation and commissioning / training. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm. Edge banding – Made for You. The CNC machining centre is equipped with an extensive range of edge banding tools to meet every requirement in woodworking. MAIN ADVANTAGES: - High performance, featuring the advanced edge banding unit H80C, drilling spindles with 8,000 rpm and the most robust spindle technology on the market, providing over 1,000 maintenance-free operating hours. Kodpfxoyuw Srj Ai Njdp - Superior and more comprehensive equipment: suction cups can be excluded and configured with the FLEX worktable to optimally equip the machine according to requirements. - Easier and more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies 'MAESTRO EDGE'. - Easy to use: the lowered frame keeps the worktable accessible at all times; the control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, there are no safety barriers necessary. Frame construction: The base structure is a monolithic construction out of thick-walled steel, reinforced throughout the entire machine bed by welded square-section plates, providing exceptional rigidity. The shape of the machine bed, with a broad base, ensures lasting precision and stability. The supporting structure consists of a particularly robust monolithic steel base, heavily ribbed and very rigid; the especially wide footprint is specifically designed to provide stability, guaranteeing consistent accuracy regardless of operating conditions, with no need to anchor the machine to the floor. The base forms a large and solid support for the moving gantry: the working unit therefore benefits from a balanced, stable, and resilient support capable of withstanding maximum loads, ensuring superior performance and higher accuracy. The moving gantry is made from a solid single piece anchored to the base and runs on high-quality prismatic guides with ball-bearing carriages. The working unit is mounted on it and moves along the Y and Z axes on prismatic guides with ball-bearing carriages. Movement of the lower moving unit (X axis) and the working unit along the moving beam (Y axis) is via a helical rack and pinion system, giving more tooth-to-tooth engagement for greater acceleration and higher speeds along the X and Y axes. The specially designed helical teeth reduce wear and lower mechanical noise. The vertical Z axis is driven by a ball screw, ensuring perfect balance under dynamic loads and supporting rapid acceleration and deceleration. The main milling unit is directly coupled to the Z-axis slide, ensuring absolute machining quality.

Stanje: novo, Leto izdelave: 2026, Ne glede na delo, ki ga morate opraviti, je A700 edina žaga, ki jo boste kdaj potrebovali. Z največjo zmogljivostjo v svojem razredu in izjemnim razponom kotov zamika ±75º je zasnovana za pravo rezanje pod visokimi koti brez kompromisov glede velikosti aluminijastih profilov, ki jih je treba rezati. Primerna je za rezanje več profilov hkrati v snopu z visoko natančnostjo. Hitro obdelovanje aluminija z natančnim PLC krmiljenjem gibanja. Pnevmatsko vodena varnostna zaščita se odpira in zapira s pritiskom na gumb ter omogoča popoln in neoviran dostop do žagalne mize. Varnostno stikalo onemogoči delovanje žage ob dvigu zaščite. Izbirno CNC-krmiljeno pozicioniranje kota zamika žage z nadzorno ploščo na dotik. • Ø700 mm TCT žagin list s 4 kW pogonskim motorjem • AS / NZS 4024:2014 varnostni standard, dvoročno rezanje • Nadglavna varnostna zaščita z varnostnimi tuneli po 900 mm na vsaki strani žage Kjdpomb U Tujfx Ai Nedp • Varnostna zaščita se pnevmatsko dvigne s pritiskom na gumb • Varnostno stikalo onemogoči delovanje žage pri dvignjeni zaščiti • 2x vertikalna in opcijsko 2x horizontalna vpenjala z nastavljivim pritiskom • Kot zamika ±75° s fiksnimi pozicijami na 0°, ±15°, ±22,5°, ±30°, ±45°, ±60°, ±75° • Sistem za brizgalno mazanje žaginega lista • Pihalna pištola za zrak in notranja LED osvetlitev • 2 × Ø100 mm priključka za odvod ostružkov • Opcijski 2,2 kW odsesovalnik ostružkov • Opcijski avtomatiziran sistem za krmiljenje zamika Izjemno primerna za: • Serijsko proizvodnjo aluminija • Proizvodnjo aluminijastih konstrukcij pod kotom • Proizvodnjo oken in vrat • Proizvodnjo žaluzij, senčil in pohištva • Proizvodnjo varjenih aluminijastih konstrukcij • Proizvodnjo aluminijastih fasad

Stanje: novo, Vacuum Lifter BARBARIC B3, Swivelling, incl. Crane - Demonstration Unit - Includes: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg For vertical and horizontal transport of flat, standard panels (coated panels, natural wood panels) up to a panel size of 3,000 x 2,100 mm - Tilt range of 90° with pneumatic tilting device - Complete unit with hoist and corresponding safety devices (vacuum gauge and hand slide valve with mechanical safety lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable traverse (Traverse length: 1,500 mm) Includes: - Option: Reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg With 2 oval suction pads 500 x 250 mm on an adjustable traverse (Traverse length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version allows lifting of materials up to 250 kg. Includes: - Option: Comfort operation BARBARIC uniWood All controls for the hoist and vacuum lifter are integrated in a single control unit – our special handling grip. This enables operation of the system and load guidance in single-hand mode. The lifting process can be infinitely controlled via frequency converter. The comfort version is supplied complete with hoist and corresponding safety devices (vacuum gauge and 2-button safety release control). Includes: - Column-mounted slewing crane BARBARIC Kdsdpfx Aiou R Szas Nop Load capacity on the lifting device: 250 kg The indicated load capacity refers to the usable load on the lifting device. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consists of column, bracket, and smooth-running jib. Swivelling and trolley movement by hand. The prerequisite for installation is a proven concrete floor (C20/R5, min. 20 cm thick). Static verification of the floor must be carried out and documented by the customer. For fixing on cracked concrete or weak substrates, oversized base plates are available on request. Mounting: Supplied with adhesive anchors for concrete floors. If ordering without hoist, please specify the required cable or hose arrangement! Delivery includes: manual trolley, energy supply, and compressed air connection. - New demonstration machine -

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 712520122, FRUMECAR ECA 3000 vollmobile Betonmischanlage Zustand: NEU Leistung: 120 m³/h Mischer: Sicoma MAO Mischergröße: 3 m³ Zementsilos: 2x 55 t Garantie: 1 Jahr ab Inbetriebnahme Weitere Maschinen und Mischanlagen finden Sie auf unserer Website. Weitere Informationen Verwendungszweck: Bauwesen Verwendbares Material: Beton Allgemeiner Zustand: sehr gut Kdsdpehd Na Uofx Ai Nep Technischer Zustand: sehr gut Optischer Zustand: sehr gut

Stanje: rabljeno, Leto izdelave: 2020, max. workpiece length 3740 mm milling spindle 1 unit main motor 15 kW CNC control system Felder Format4 Type Profit H500S 16.38 CNC machining center for sale on behalf of customer ----- - From a wood window production facility. - Machine is still connected and ready for demonstration - Without machining tools Technical Description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Axis travel paths: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional locking mechanism for the C-axis - Boring head DH 18 6H1S: vertical boring unit with 12 spindles (7 spindles in X-direction, 5 spindles in Y-direction, slot saw in X-direction) Horizontal boring unit with 6 spindles, 4 in X-direction and 2 in Y-direction. 1 slot saw in X-direction, max. diameter 120 mm - Disc tool changer with 24 tool positions on the right side of the machine stand max. tool diameter 240 mm max. tool height 370 mm - Tool change position for circular saw blade mounted on the gantry/tool changer, max. saw blade diameter 350 mm - Tool changer on the left in the machine stand with 10 tool positions. max. tool diameter 180 mm max. tool length 230/300 mm collet distance 110 mm - Disc tool changer with 24 tool positions mounted on the gantry, traveling in X-direction max. tool diameter 240 mm max. tool height 370 mm - Mobile pick-up station for chip deflector - 6 workpiece supports, s-motion, position-controlled - 2 machining zones for pendulum operation - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved arch processing - Including all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - Software "WoodFlash" Lamello Clamex P Macro Notching Macro - "Greenline Package" for reduced energy consumption ----- Price for the above-mentioned machine on request! ----- Optional new Oppold tool set for H500: Windows Timber windows IV 68, 78 and 88 inward-opening, with changeable rebate on the side and top. Glazing rebate 20mm, frame and sash shoulder 20° bevel with loose and pre-milled glazing bead Old building timber windows IV 68, 78 and 88 inward-opening, without rain bar, with changeable rebate on side, top and bottom. Glazing rebate 20mm, frame and sash shoulder 15° bevel with hung weather bar Timber-aluminium windows (system provider: Gutmann Mira, slanted rebate system) HA IV 68, 78 and 88, inward-opening, 2 sash variants: square and slanted, changeable rebate bottom, side & top Entrance doors Timber HTIV 68, 78 and 88 with single rebate in the frame and double rebate in the sash, inward-opening, 1 sash variant, glazing rebate, without changeable rebate offset construction Kedpfjyq Sztex Ai Nsdp Timber-aluminium IV 68, 78 and 88 with single rebate in the frame and double rebate in the sash Lift-slide doors Timber-HS IV 68, 78 and 88, without frame production Timber-aluminium-HS IV 68, 78 and 88, without frame production Execution...

Stanje: rabljeno, Leto izdelave: 2018, Startech CN MAIN FEATURES Flexible and individually configured production combined with speed and precision. Drilling from above with reference to the top side of the panel enables absolutely precise machining. Numerical control with 7" color display: simple and intuitive. TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm: 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm: 300 x 90 x 10 Working area drilling/grooving mm: 0 x 800 / 0 x 800 X-axis travel mm: 750 Max. traversing speed X-Y axes m/min: 25 DRILLING UNIT Vertical spindles Quantity: 7 (4X-4Y, one in common) Horizontal spindles (along Y-axis) Quantity: 2 (1+1) Horizontal spindles (along X-axis) Quantity: 1 Fixed grooving saw (direction) X Diameter of grooving saw mm: 100 Max. thickness grooving saw mm: 5 Motor power kW (HP): 1.5 (2) Spindle speed rpm: 3350 Saw blade speed rpm: 4300 INSTALLATION Power supply V (Hz): 380 / 400 (50 / 60) Installed power KVA: 4.5 Compressed air requirement bar: 6 Air consumption Nl/cycle: 90 Extraction requirement m³/h: 1200 Extraction air velocity m/sec: 20 Extraction nozzle diameter mm: 120 GENERAL FEATURES Universal CNC drilling machine with a worktable featuring a fixed gantry and movable workpiece for the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving operations with integrated grooving saw in 'X' direction Self-supporting construction: Machine base made of steel tubular structure providing a large base for accommodating the worktable. The structure is positioned on 3 self-leveling feet. The electrical cabinet is integrated into the machine frame. Medium bakelite support table "Easy Motion": - an MDF sector for carrying out through drilling, which can be automatically swung away for horizontal drilling - an infeed roller to facilitate panel feeding - a rear roller conveyor to assist smooth panel movement - left and right stops - a central aligner with manual adjustment It is necessary to use the left and right stops to horizontally drill the two opposite panel sides in the 'X' direction. Panel positioning along the X-axis by means of suction. Carriage assembly: This is a gantry structure made of steel tube. The main working unit is installed on the gantry. F10L drilling unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles 32 mm - 2 horizontal drill heads, 1 in X direction with one drill, 1 double drill head in Y direction (1+1 drill holder D10 mm) - Speed 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic stroke per spindle 70 mm - Horizontal pneumatic stroke of drill unit Positioning of workpiece and movement of working unit: A CNC-controlled suction unit clamps the workpiece and positions it sequentially under the working unit during machining. Movement in X and Y axes is via THK guides with transmission on reinforced toothed racks. Movement in the Z axis is pneumatic on "ball-bushing" guides, with adjustable positioning at the stop. Positioning of the work units is performed using state-of-the-art technology and drives. - CONTROL: The control system has been specifically developed for industrial applications. Kodpfx Aevwbp Aoi Nsdp

Stanje: novo, Leto izdelave: 2025, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. Kdsdpeiidm Nofx Ai Nsp The machine is on display at our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - available immediately -

Stanje: rabljeno, Leto izdelave: 1995, Cutting width: 375 mm Cutting height: 150 mm Saw blade dimensions: 500 x 30 mm Motor power: 2 x 3 kW Cutting length: 5100 mm Rotational speed: 2800 rpm Air pressure: 6 bar Machine weight: approx. 700 kg Kdodpotv Rgrjfx Ai Njp Space requirement: approx. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Robust cast construction of the saw unit * Large cutting area, allowing simultaneous cutting of 2 profiles * Easy adjustment of the movable unit via roller guide * Double bearing of the swivel mechanism * Safe clamping via dual-pressure system * Double guide for saw feed * Hydropneumatic saw feed * Correction scale for external dimensions * Left saw unit fixed * Swivel range 45°-90° * Including extraction unit (without piping), ALKO Mobil-Jet 100, year of manufacture 2002