Stroj za rezkanje

EMCO FB-4

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 450 mm, dolžina pomika po osi Y: 300 mm, dolžina podajanja os Z: 350 mm, 3-osni digitalni prikazovalnik Horizontalno in vertikalno rezkalno vreteno Pinola Gbedpfx Agewyit Hoyei Tehnični podatki: Dolgobna posuv X / vzdolžno pomikanje X: 450 mm Prečna posuv Y / prečno pomikanje Y: 300 mm Navpična posuv Z / navpično pomikanje Z: 350 mm Velikost mize: 800x400 mm Vpenjalni konus vretena: SK40 Območje obratov: 50-2500 min⁻¹ Območje pomika: 8-400 mm/min Pogonska moč: 3,2 kW Teža stroja: 1500 kg Tehnični podatki, pribor in opis stroja niso zavezujoči.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, TECHNICAL DATA Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Gbjdpfx Aewuurwogyei Distances Between T-slots: 65 mm From spindle centre to underside of counter support: 160 mm Feeds Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Rapid traverse Longitudinal rapid traverse: 4000 mm/min Cross rapid traverse: 4000 mm/min Vertical rapid traverse: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55–3000 Head, swivelling: 0–140° Spindle feed Quill diameter: 90 mm Quill travel: manual Feed: 75 mm Weight: approx. 2300 kg SCOPE OF SUPPLY Includes (non-exhaustive list): - ABENE milling machine - Heidenhain control - Tool holder set - Coolant pump - Leveling feet - Mounting block - Complete operating documentation Exact scope of supply as per photo series

Stanje: dober (rabljeno), Leto izdelave: 2004, potovalna razdalja osi X: 450 mm, pomik osi Y: 300 mm, pomik po osi Z: 350 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 50 obr/min, poteza s peresom: 100 mm, Orodjarska rezkalna stroj V/H Proizvajalec: Emco Tip: FB-4 Leto izdelave: 2004 Krmiljenje: prikazovalnik Heidenhain ND-760 Tehnični parametri: ----- • Pomiki X-Y-Z: 450 x 300 x 350 mm • Vpenjalna površina: 800 x 400 mm • Vpenjanje orodja: SK-40 • Hodi pinole: 100 mm • Rezkalna glava vrtljiva ± 90° • Vreteno: 50 – 2.500 obr/min • Izbiranje hitrosti: 18 stopenj • Električno centralno mazanje • Strojna luč • Hladilni sistem • Kabina proti brizganju (zložljiva) • Teža: 1.550 kg • Dimenzije DxŠxV v mm: 1.485 x 1.500 x 1.700 mm Dodatna oprema: ----- • 4x nastavljive noge za stroj Gbedsx Tzk Rjpfx Agysi • Navodila za uporabo • Vpenjalni ključ • Nasprotni ležaj za vodoravno obdelavo • Set gredi za vodoravno obdelavo • Zaščitni pokrov mize (trenutno odstranjen) Na voljo sta dve identični stroji, obe servisirani in delno prenovljeni v Q4-2025.

Stanje: dober (rabljeno), Leto izdelave: 2003, Internal item no.: 25045 Universal Milling Machine Emco FB4 Year of manufacture: 2003 + Accessories (Hydraulic machine vice Allmatic 110 / 12x SK40 tool holders in rack) + Electrically tested until 11/2028 (according to inspection sticker) + 3-axis digital readout Heidenhain ND780 Travels: X 450 / Y 300 / Z 350mm Quill stroke: 100mm Main drive: 3.2kW Gbjdsw Hrycjpfx Agyei Speed range: 63 - 3,150 rpm Milling table: 800x400mm Automatic central lubrication Dimensions (LxWxH): 200 x 200 x 200cm Weight: 2,100kg

Stanje: dober (rabljeno), Leto izdelave: 2010, X Y Z: 1270 x 508 x 508 mm, miza 1324 x 457 mm, 12000 o/min, BT 40, upravljanje HAAS, 24-postajni ATC, 40 KM, transportni polž za ostružke, hlajenje, petosna rotacijska miza Haas TR210. Gbedpfx Agjxpw Rvoyei

Stanje: delavnici obnovljeno (rabljeno), Univerzalni rezkalni stroj za orodje Blagovna znamka: harich (DECKEL) Model: B (FP 2) brezstopenjski prenovljen s CE geometrijski prevzem z merilnim protokolom z garancijo Oprema: - 3-osni digitalni merilni sistem FAGOR Innova 30i-M - Fiksna ali univerzalna miza Gbjdpfxovfdatj Agyei - Vertikalna rezkalna glava SK 40 - Centralno mazanje, ročno upravljano - Naprava za hladilno tekočino - Navodila za uporabo CE in varnostna oprema: - nova električna napeljava stroja z razdelilno omarico - elektronsko nadzorovan pokrov na vertikalni rezkalni glavi - Zaščitni pokrov vpenjalne glave z električnim varovanjem - Pogonski motor z zavorno funkcijo - Krmilna konzola z gumbom za nujni izklop, odklepanje, zagon in zaustavitev, potenciometer za nastavitev podajanja - nova dokumentacija za stroj in razdelilno omarico - Izjava o skladnosti CE

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition, CE-compliant, from Training Workshop!! Technical Data: • Year of manufacture: 2010 • Machine No.: 347283 • Rigid angle table • Spindle speed: stepless up to 4500 rpm • Feed: stepless in 3 axes from 0 to 2000 mm/min Gedpfxjxuppue Agyobi • Rapid traverse (X and Y axis): 5000 mm/min Z axis: 4000 mm/min • Travel (X/Y/Z): 400/350/400 mm • Table surface: 650 x 350 mm • Table load: 250 kg • Vertical quill stroke: 60 mm • Vertical quill and horizontal quill – SK40 • Hydraulic drawbar system • Weight approx. 1800 kg • Space requirement approx.: 2.3 x 2 x 2 m • Drive power: 15 KVA Accessories and Features: • Heidenhain TNC 320 CNC control • Hydraulic clamping vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control manual, and programming examples • Handwheels • Coolant system • Electronic handwheel HR410 About the Machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 320 CNC control. This universal milling machine is in excellent condition with very low operating hours. It was used exclusively for training purposes. The TNC 320 control is very user-friendly. Furthermore, the machine features hydraulic clamping for both vertical and horizontal operation. Conversion from vertical to horizontal is extremely simple thanks to the swiveling vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. You are welcome to inspect and test the Kunzmann under power at our site. A total of 7 Kunzmann WF4/3 machines with Heidenhain TNC 320 CNC control are available. All machines are immediately available.

Stanje: novo, Table width: 3000 mm Table length: 1500 mm Torch heads: 1 Control system: CNC Feed rate: 20,000 mm/min Total power requirement: 15 kVA Required floor space: approx. 4.5 x 2.5 m * Heavy-duty machine bed with precision guides for smooth machine movement * Ball-bearing cross carriage for height adjustment with 400 mm vertical stroke * Thermal separation of drive and cutting areas ensures maximum precision * Automatic height sensing and torch height control during cutting * Torch holder with collision protection and automatic shut-off in case of collision * Machine setup or relocation possible using a plug & play process with forklift, pallet truck, or crane * 3-sided access to the cutting area due to cantilever design SATOTEC Downdraft Table: The SATOTEC table system features a robust table construction for a max. cutting thickness of 150 mm. For cutting workpieces up to 150 mm thick, oxy-fuel cutting technology is required. The workpiece support frame is fitted with replaceable flat steel slats, 3 mm thick and mounted at a 45° angle. The slat spacing is 50 mm. Kjellberg Q1500 Power Source: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm, both dry and under water * Recommended cutting range 0.5 to 40 mm * Maximum pierce thickness 30 mm, upgradable using ProPierce Technology * Marking, notching, and center punching possible even on coated metal materials * Inverter power source with digitally controlled, fully electronic process * Integrated cooling with semi-automatic filling and draining Gas Control: Fully automatic, processor-controlled plasma all-gas console Q-Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control TEKA EcoCube 5.5 kW Extraction Unit Filter medium: dry, grease-free or oil-free dust/fume Filter area: 100 m² (4 cartridges at 25 m² each) Filter cartridge: BIA M, Type Nano Separation efficiency: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan capacity: 4,500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50Hz or 480V 60Hz Current draw: 11.5 A Gedjpm U U Nepfx Agysbi Current type: 3Ph+N+PE Fan mounted on the system, incl. silencer bend, right side Motor control: frequency inverter Noise level: 75 dB(A) + max. 10 dB(A) during cleaning pulse Intake socket: NW 250 mm via intake duct, left side Exhaust: via silencer bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: light gray - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Closing hooks and toggle latches - Compressed air connection and condensate drain each fitted with a bulkhead fitting - Compressed air connection with hose tail d=8mm - System equipped with grounding stud - Cables in UL specification - EATON frequency inverter on the left in the attached control cabinet

Stanje: rabljeno, Leto izdelave: 1996, Prehod vretena: 80 mm Maks. premer struženja: 395 mm Maks. dolžina struženja: 750 mm Krmiljenje: Sistem TX 8H Maks. hitrost vretena: 3.150 obr./min CNC stružnica | TRAUB - TNA 400 Stroj je v dobro ohranjenem stanju. Gbedexbtqvepfx Agyei

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 480 mm, pomik po osi Z: 310 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, poteza s peresom: 120 mm, skupna višina: 1.820 mm, skupna širina: 1.780 mm, skupna dolžina: 1.400 mm, širina mize: 500 mm, dolžina mize: 900 mm, teža obdelovanca (maks.): 190 kg, razdalja od mize do središča vretena: 390 mm, Oprema: dokumentacija / priročnik, Table surface (swivel table): 900 x 500 mm Max. workpiece weight: 190 kg Travel X: 600 mm Travel Y: 450 mm Travel Z: 380 mm Quill travel Z1: 120 mm Speed range: 40 - 2000 rpm Gear steps: 18 Drive power: 3.75 kW Tool taper: SK 40 (DIN 69871A) Weight approx.: 1,560 kg including extensive standard accessories, such as: Work area enclosure 3-axis digital readout CONTUR Hydraulic tool clamp for vertical spindle, tool holder SK 40, DIN 69871A, pull stud DIN 69872, incl. hydraulic unit Monitored spindle guard 3 pcs. conventional handwheels Complete electrical equipment for three-phase 400 V, 50 Hz Ball screw spindles for X, Y, and Z axes Vertical milling head Fixed swivel table, 900 x 500 mm clamping surface Swiveling mechanism for vertical milling head LED machine light Protective bellows for vertical and horizontal guideways Gbedpfxshu Rwfs Agyoi Automatic central lubrication for axes and ball screw spindles Coolant system with pump Set of 4 mounting elements Including tool holder package consisting of: 1 x ER40 collet chuck 7 x collets (Ø 6, 8, 10, 12, 16, 20, 25 mm)