Sredinski stružnica in stružnica za vreteno

EMCO Emcomat 17/20

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, poteza s peresom: 190 mm, hitrost vretena (min.): 41 obr/min, največja hitrost vretena: 1.800 obr/min, skupna masa: 1.920 kg, teža obdelovanca (maks.): 17 kg, najv. debelina jeklene pločevine: 32 mm, vrtilni moment: 250 Nm, višina mize: 900 mm, Used DONAU Rapid Radial Drilling Machine Type DR 32 - Fully overhauled by vaumatec in 2022 - Equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 support feet to relieve the table frame) Technical data: Drilling capacity (solid material): St 60/E335, Ø 32 mm (with feed rate 0.20 mm/rev): GG 22, Ø 45 mm Tapping capacity: St 60/E355, M26 Tapping capacity: GG22, M35 Tool holder: MT4 Column diameter: Ø 195 mm Spindle nose to table distance (min./max.): 260/660 mm Table height: 900 mm Bsdpfxsrn Riqo Afqjdk Quill stroke: 190 mm Column travel: 400 mm Spindle speeds, Range I: 41-1800 rpm Feeds: 0.1-0.15-0.20-0.3 mm/rev Spindle torque: max. 250 Nm Arm travel resistance (radial): 25 N Arm travel resistance (axial): 25 N Clamping force (radial): 3500 Nm Clamping force (axial): 5500 N Feed force: 7500 N Max. permissible mass: 17 kg Max. permissible moment of inertia: 0.002176 kgm Workpiece: Max. table load: 1000 kg Center of gravity: centered on the working surface

Stanje: dober (rabljeno), Leto izdelave: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Only approx. 1,000 spindle hours since spindle replacement Total machine hours: approx. 20,500 2024: Spindle replaced (18,000 rpm) 2024: Geometry re-calibrated Bedpfxowz I Acs Afqedk Travel paths: X 650 / Y 850 / Z 500 mm Rotary table: 360° continuous Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle taper: HSK-A63 The machine is equipped as follows: - 60-position tool changer - ICS (20 bar) with belt filter system - Air through spindle - Kessler table, 500 mm diameter - Infrared part measurement – 3D probe - Tool measurement via BLUM laser - Rotational viewing window - POS DCM collision module - Mobile electronic handwheel - Oil mist extraction - Heidenhain linear measuring systems X, Y, Z - Purge air for all linear measuring systems - Active air-to-air electrical cabinet cooler - Active cooling for 4th & 5th axis, controlled - Network and USB connection - Controlled spindle chiller - Heidenhain rotary measuring system - POS contour monitoring - External hinged belt chip conveyor - Coolant pump at head, controlled via M functions - Pump for chip rinse system - Chip rinsing equipment - Machine status indicator - Air at spindle - Oil/coolant separator, electromechanical - Automatic coolant level monitoring - 3-fold media connection at table center - Hydraulic unit incl. control via M function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + ICS unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run company. In 2024, the spindle was replaced and geometry was calibrated (guides repaired and aligned). Since then, the machine has seen only limited use.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 83 mm, stružna dolžina: 1.000 mm, premer struženja: 570 mm, premer struženja nad zgornjim sanežem: 340 mm, premer tulec: 80 mm, hod vretena: 200 mm, skupna masa: 3.200 kg, zunanji premer vpenjalne glave: 250 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machine is in very good condition. Available immediately! Bdjdpewxw S Ijfx Afqek Can be tested under power.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8044000703A, Siemens 840 D control Country of manufacture: EU – Poland Voltage: 400V Dimensions: 3082x2260x1775 mm (with chip tray) 4228x2260x1775 mm (with chip conveyor) Net machine weight: 3400 kg TECHNICAL SPECIFICATIONS CTX 310 ecoline V1/V3 New Design Working capacity Swing over bed: 330 mm Swing over cross slide (X): 260 mm Maximum turning diameter: Ø 200 mm Chuck diameter: Ø 210 mm X-axis travel: 182.5 mm Z-axis travel: 455 mm Centre height: 190 mm Distance between centres: 581 mm Feed drive Rapid traverse X and Z axes: 30 m/min Control: Siemens Sinumerik 840D Slim Line C-axis with Siemens control Speed: 0 – 100 rpm Torque: 112 Nm Accuracy: < 0.04° Spindle Spindle nose: 140 h5 mm Front bearing diameter: 100 mm Spindle bore: Ø 74.3 mm Bar capacity: 51 mm Main drive with Siemens control Drive power (40% / 100% duty cycle): 16.5 / 11 kW Torque (40% / 100% duty cycle): 166.5 / 112 Nm Max speed: 5,000 rpm Tool turret Number of tool stations: 12 Tool holder: DIN69880 (VDI 3425) Turret disc diameter: 30 mm Tool change (with locking): 0.95 sec Tool change (without locking): 0.4 sec Powered turret with Siemens control Number of driven tools: 12 Drive power (40% duty cycle) at 4000 rpm: 8.4 kW Torque (40%): 20 Nm Max speed: 4,500 rpm Tailstock Automatic movement: 396 mm Quill bore: flange Maximum quill axial force: 400 daN Hydraulic unit Tank capacity: 50 L Maximum pressure: 50 bar Bdedpfow T Sqyex Afqsk Cooling system Tank capacity: 175 L Capacity with conveyor: 200 L Pump power: 0.85 kW Pump flow at 5 bar: 30 L/min Electrical connection Maximum power: 21 kVA Current: 400V Frequency: 50–60 Hz Fuses: 33A Pneumatics Compressed air connection: 6 bar Environmental conditions Ambient temperature: +15 to +35°C Maximum humidity: 75% Unless otherwise stated, the technical information is provided without guarantee of accuracy or completeness.

Leto izdelave: 2017, Stanje: pripravljen za uporabo (rabljen), Laser power: 10kW (10,000W), Working area: 3000mm x 1500mm, Maximum material thickness: Mild steel: 25mm, Stainless steel: 30mm, Aluminium: 30mm, Copper: 12mm, Brass: 15mm. Positioning speed: 120m/min, Positioning accuracy: +/-0.05mm, Maximum workpiece weight: 1,100kg. Machine dimensions (X/Y/Z): approx. 9500mm x 3500mm x 3500mm, Extraction unit dimensions (X/Y/Z): approx. 1500mm x 1500mm x 4000mm, Machine weight: approx. 12,000kg, Operating hours: approx. 17,000h. Documentation available. On-site inspection possible. Expected to be available from June 2025. Bdedjvyiqgepfx Afqok

Stanje: novo, WM210V - ROGI VARIO METAL LATHE 230V-1Ph Swing over bed: ----- 210 mm Swing over cross slide: ----- 110 mm Centre height: ----- 105 mm Distance between centres: ----- 400 mm Bed width: ----- 100 mm Cross slide travel: ----- 75 mm Compound slide travel: ----- 55 mm Spindle bore: ----- 21 mm Spindle mount: ----- MT3 Spindle speed range: ----- variable 50 - 2500 rpm Thread cutting imperial: ----- 10 - 44 TPI (8) Thread cutting metric: ----- 0.5 - 3 mm (10) Quill travel: ----- 60 mm Quill diameter: ----- 30 mm Quill taper: ----- MT2 Motor power: ----- brushless 600 Watt Weight: ----- 75 kg STANDARD ACCESSORIES * 3-jaw 100 mm chuck - self-centering * 4-way tool post * Chip tray * Rear splash guard * Chuck guard * Leadscrew cover * Tool post guard * Change gear set * Digital speed display * Fixed centres * Forward / Reverse switch Bsdpfx Aoga Txcsfqodk * Toolkit in case OPTIONS * 4-jaw 100 mm chuck - independent * Flange for 4-jaw 100 mm chuck * Fixed steady rest WM210V * Travelling steady rest WM210V * Faceplate WM210V * Stand/cabinet WM210V

Stanje: novo, Centre distance ----- 500 mm Centre height ----- 125 mm Swing over bed ----- 250 mm Swing over cross slide ----- 150 mm Spindle taper ----- MT4 Spindle bore ----- 26 mm Bed width ----- 140 mm Spindle speed ----- 80-1600 rpm Tailstock taper ----- MT3 Motor ----- 750W Bdsdpfx Afepz Iy Aoqek Lathe equipped with automatic longitudinal and cross feed Including: cabinet base, 3-jaw chuck, 4-jaw chuck, faceplate, fixed steady rest, travelling steady rest, CE guard

Stanje: rabljeno, Leto izdelave: 2000, Technical Details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Turning length: 610 mm Cross travel (X-axis): 160 mm Longitudinal travel (Z-axis): 610 mm Control: Siemens 810D Spindle speed: 1 – 6300 rpm, stepless Spindle torque: 86 Nm Spindle bore: Ø 42 mm Spindle nose diameter in front bearing: Ø 80 mm Feed drive AC: X/Z: 5000 / 7000 N Rapid traverse X/Z: 16 / 20 m/min Tool turret – number of stations: 12 / VDI 30 Tailstock quill: ISO MK4 Tailstock quill travel: 500 mm stroke Main spindle power: 7.5 kW (100% duty: 11 kW) Electrical specification – voltage/frequency: 3/PE ~400V and 50/60Hz Total power consumption: 20 kVA (11 kW) Machine weight approx.: 4.0 t Machine dimensions approx. LxWxH: 3.0 x 2.0 x 2.1 m The CNC lathe features a C-axis. Distance main spindle – tailstock: 805 mm Hydraulic power chuck Röhm Ø 160 mm (without jaws), max. speed 7,500 rpm Tailstock with live center Tool turret (12 positions available for driven tools) Currently, 8 tool holders installed in the magazine, of which 4 pieces with collet chuck Coolant system, coolant supply via the tool turret Bdsdpou Ixwiofx Afqek Control cabinet with Rittal cooling unit type SK3393100 Workpiece collection tray Machine lighting Accessories: 1x driven tool In standard condition.

Stanje: rabljeno, Leto izdelave: 2015, Technical Details: X-axis travel: 960 mm Y-axis travel: 600 mm Z-axis travel: 480 mm Rotary table: D 350 mm Table load capacity: 200 kg Spindle speeds: 12,000 rpm Spindle motor power: 14/10 kW Control system: HEIDENHAIN iTNC 530 Rapid traverse: 32 / 32 / 24 m/min Tool changer: 30 positions Spindle taper: ISO BT 40 Machine weight approx.: 7.4 t Total power requirement: 45 kVA Space requirement approx.: 3.1 x 2.3 x 3.1 m 5-axis simultaneous universal machining center, NC rotary-swivel table D 350mm, A-axis (120/-42°), C-axis 360°, Through-spindle coolant (IKZ), Bdodpfjrm Txbox Afqsk Electronic handwheel, Chip conveyor, Direct measuring system, Operating hours: approx. 9,000 power-on hours, approx. 3,500 spindle hours

Stanje: rabljeno, Leto izdelave: 2014, Naprodaj je 1 CNC stružnica Spinner TTC 300, letnik 2014, vključno z enojnim podajalcem palic. Stroj je v zelo dobrem stanju, redno vzdrževan in takoj pripravljen za obratovanje. Bjdpfsw Rbb Asx Afqedk