CNC stružno-rezkalni center

EMCO E 65

Stanje: rabljeno, Leto izdelave: 2016, proizvajalec krmilnikov: Siemens, model krmilnika: 828D - ShopTurn, Opis: Glavno vreteno: Tehnologija: Vreteno z jermenskim pogonom Hitrost vrtenja: 5.000 min⁻¹ Moč (maks.): 22 kW Navor (maks.): 305 Nm Premer prehoda palice: 65 mm Vpenjanje obdelovanca: 3-čeljustna pretočna glava, SMW Autoblok 210 BB Nosilec orodja (X/Y/Z): Tehnologija: Revolver z 12 postajami Vpenjanje orodja: VDI 30 Pogon orodja: 5.000 min⁻¹, 5 kW, 20 Nm Hodi v X/Y/Z: 260/80/610 mm Hitri pomik v X/Y/Z: 30/15/30 m/min Konjiček: Tehnologija: Hidravlično gnano Pritisk (maks.): 8.000 N Hod: 500 mm Stožec: MK4 Oprema/pribor: Upravljanje ostružkov: Kad za ostružke Upravljanje hladilne tekočine: IKZ črpalka z visokim pritiskom, 14 bar Dovod surovca: Pripravljena vmesnik za avtomatski podajalec palic Odvajanje gotovih delov: Lovilec delov s transportnim trakom Hedpfx Aajyxuhyegonk Nosilci orodja: Razne rabljene toge in gnane držala Dodatna oprema: Pištola za splakovanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 154 h, potovalna razdalja osi X: 215 mm, pomik osi Y: 100 mm, pomik po osi Z: 605 mm, skupna višina: 1.725 mm, skupna širina: 1.690 mm, skupna masa: 4.650 kg, proizvajalec krmilnikov: MAZATROL, model krmilnika: SMOOTH Ez, število osi: 3, This 3-axis Mazak QTE-200MY SG was manufactured in 2023. It features a maximum swing diameter of 695 mm, a standard cutting diameter of 235 mm, and a maximum turning diameter of 340 mm. The main spindle operates at speeds up to 5,000 rpm with a motor power of 15.0 kW. It is equipped with a 12-position turret and rapid traverse rates of 30, 10, and 30 m/min in the X, Y, and Z axes, respectively. Contact us for further information about this machine. Additional equipment • Transformer for Europe (CE marking) • Roller guide with spherical roller bearings • SD card interface + USB storage interface • 1 set of control buttons • Foundation kit (steel plates) • CE certification (with noise filter) • C-axis positioning 0.0001° increment • 12-position turret • Y-axis control • Bar feeder interface Additional information Automatic parts catcher High-pressure coolant system Preparation for chip conveyor 8" open chuck Measuring arm Signal tower Rotary center Chain chip conveyor with side discharge Cylindrical and polar coordinate engraving function Automatic picking cycle with load detection Quick-change tool holder system Bar stock diameter Workpiece Maximum swing diameter: 695 mm Standard cutting diameter: 235 mm Maximum cutting length: 535 mm Maximum turning diameter: 340 mm Maximum bar diameter: 65 mm Maximum chuck weight: 200 kg Hnedpfx Aajx D R Svogek Maximum workpiece weight: 500 kg Distance between spindle nose and workpiece end: 81 to 686 mm Turret Number of tool stations: 12 Tool size (external turning): 25 mm Tool size (internal turning): 40 mm Tool size (driven drill): 20 mm Tool size (driven end mill): 20 mm Tool size (driven tap): M20 Indexing time per station: 0.23 s Indexing time for full rotation: 0.63 s Tailstock Quill bore (Morse taper): MT No. 5 Tailstock travel (body movement): 565 mm Maximum thrust: 5000 N Tools: Milling spindle power (continuous): 3.7 kW Milling spindle power (40% duty cycle): 5.5 kW Maximum milling spindle speed: 4,500 rpm Minimum milling spindle speed: 20 rpm Media: Tank capacity: 225 L Coolant pump: MTA70H-250 Power: 0.25 kW Compressed air flow rate: 75 to 370 L/min (ANR) Dimensions Machine depth: 2785 mm

Stanje: dober (rabljeno), Leto izdelave: 2006, Maszyna używana wyłącznie do tworzyw sztucznych. Szczegółowe dane techniczne znajdują się w załączonym dokumencie PDF. Części prezentowane ręcznie nie wchodzą w zakres dostawy. Hnjdpfxsu Ibihj Aagek

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 15.845 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S6E182501, izvrtina vretena: 65 mm, največja hitrost vretena: 5.000 obr/min, moč vretenovega motorja: 22 W, Stroj je zelo dobro ohranjen, 90% proizvodnje v uporabi ene osebe. Servisiran po priporočilih proizvajalca. Hedpfx Aoyvtugsagonk

Stanje: zelo dobro (rabljeno), dolžina podajanja os X: 450 mm, dolžina pomika po osi Y: 300 mm, dolžina podajanja os Z: 300 mm,

Leto izdelave: 2012, stanje: pripravljen za uporabo (rabljen), X-axis: 210 mm, Z-axis: 610 mm, swing diameter over bed/compound slide: 540/360 mm, maximum turning diameter: 310 mm, length: 1,730 mm, width: 2,860 mm, height: 1,880 mm, weight: 4.3 t, equipped with FMB unirobot MH5L-XP automation. Hedpfx Aog Rcf Ijagjnk

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), X-axis: 210 mm, Z-axis: 610 mm, swing diameter over bed/cross slide: 540/360 mm, max. turning diameter: 310 mm, length: 1,730 mm, width: 2,860 mm, height: 1,880 mm, weight: 4.3 t, with automation FMB unirobot MH5L-XP. Hsdpfx Asg Rcf Soagjnk

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, moč vretenovega motorja: 29.000 W, največja hitrost vretena: 5.000 obr/min, skupna masa: 620 kg, število osi: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. This highly productive CNC turning-milling center features a main and counter spindle with a maximum torque of 250 Nm and speeds of up to 5,000 rpm. The milling spindle delivers up to 12,000 rpm. It is equipped with a 40-position tool magazine, a 12-position turret, and the modern Sinumerik ONE control system. If you are looking for high-quality turning and milling capabilities, consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for further information. • Main spindle (direct drive): • Max. torque: 250 Nm • Counter spindle (direct drive): • Max. drive power: 29 kN (as supplied) • Max. torque: 250 Nm • Speed range: 0–5,000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12,000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12,000 rpm • Kinematics and axes: • Upper cross-slide with turning/milling spindle as motor spindle; hydraulic clamping during turning operations • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tool equipment: • Tool magazine with 40 stations, HSK-T63 • 12-station radial turret with direct drive, tool interface BMT55P • Spindles and clamping: • High-pressure cylinder with draw tube for the main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in the counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing at main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based user interface • 22" multi-touch display • IPC with 240 GB Hnjdox D E Hbopfx Aagjk • SHOPTURN dialog programming • 3D simulation and drawing • Remainder material detection • Unlocking of external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for programming the C-axis • USB interface, network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status indicator • Fluids and operating materials: • 2 cooling fluid lines at 25 bar • 2 rinsing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measuring system: • Glass scales: X1 (incl. air supply), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1,200 mm • Belt filter system, 980 liters • Waste water pump • Control/monitoring options: • Electronic handwheel BAOD-SL (portable, magnetic holder for Siemens controls) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage monitoring BK-MICRO • 4-axis turning / balancing cut (SINUMERIK option) • Alternative end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specs as supplied): • Bar length: 300–1,200 mm • Bar diameter: 10–104 mm • Material support area (front view): 800 x 1,250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min.

Stanje: dober (rabljeno), Leto izdelave: 2007, with UniRobot FMB Control: SIEMENS 828D Swing over bed: Ø 540 mm Swing over cross slide: Ø 360 mm Spindle – tailstock distance: 680 mm Max. turning diameter: Ø 310 mm Max. part length: 520 mm Max. bar diameter: Ø 65 mm Travel paths: X= 210, Z= 610 mm Max. chuck size: Ø 254 mm Main spindle: 15/18 kW (100%, 60% duty cycle) Speed range: 60 – 4200 rpm stepless Max. torque: 192 Nm C-axis Rapid traverse: 1000 mm/min TOOL TURRET 12 stations all driven Hnedpfx Asv S Ekyeagok tool holding: VDI 30 Speed range: 0–5000 rpm Max. drive power: 5 kW Max. torque: 20 Nm Automatic tailstock, hydraulic Travel: 500 mm Internal taper: MT 4 Robot cell FMB MH5L-XP With Yaskawa Motoman MH 5 L robot Max. payload: 5 kg Max. working radius: 895 mm Weight: 27 kg Working range: S-axis (rotation): -170° ~ +170° L-axis (lower arm): -65° ~ +150° U-axis (upper arm): -138° ~ +255° R-axis (wrist roll): -190° ~ +190° B-axis (bend/angle): -135° ~ +135° T-axis (wrist twist): -360° ~ +360° With coolant system, chip conveyor, extraction unit Total weight (machine/robot): approx. 5,300 kg

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Pomik X/Z: 210mm/610mm, pomik Y: +/-40mm, premer vrtenja nad prečnim suportom: 360mm, prehod vretena: 65mm, število orodnih mest: 12, držalo orodja: VDI30, hitrost vrtenja: 4000 obr/min, hitri pomik: 24m/min, sila podajanja: 5000Nm. Dimenzije stroja X/Y/Z: pribl. 4000mm/2500mm/2500mm, masa: pribl. 6000kg, krmiljenje: Siemens Sinumerik 810D, delovne ure: 4894h. Vključuje oljni hladilnik, zbiralnik delov, samostiskalno vpenjalno glavo Kitagawa BB08, napravo za vpenjanje s penastimi pušami, držala za stružne rezila in držala za vrtalne palice. Dokumentacija je na voljo. Ogled na lokaciji je možen. Hjdjxuvn Dopfx Aagsnk