Navpična stružnica CNC

EMAG VLC 400

Technical Details
Maximum workpiece diameter: 400 mm
Maximum workpiece length: 300 mm
Control: SIEMENS 840Dsl
Swing diameter: 520 mm
Chuck diameter: 500 mm
Travel paths x / y / z: 995/+,-30/580 mm
Additional Information
Total operating hours: 1848h

1.2.2 TURRET BASE UNIT AND Y-AXIS SLIDE UNIT
The Y-axis slide unit is mounted laterally on the machine base body. A responsive, position-controlled, and maintenance-free servo motor is used for axis drive. It drives the slide via a high-precision ball screw. A linear measurement system is installed in the Y-axis. Position scatter: 2 μm.
TURRET BASE UNIT
Shortest indexing times thanks to direct drive, cooled for consistent accuracy.
MAIN SPINDLE 37.7 KW

1.2.3 HP TURRET DRIVE UNIT FOR DRIVEN TOOLS (C442)
With internal coolant supply to the tool.*
Max. speed: 6,000 rpm
Nominal speed: 3,200 rpm
Torque at 100% duty cycle: 54 Nm / 18.1 kW
Torque at 40% duty cycle: 83.6 Nm / 28.0 kW
Torque at 10% duty cycle: 100 Nm / 33.5 kW

1.2.4 TOOLHOLDER UNIT FOR DRIVEN TOOLS, 12xBMT75
For BMT75 toolholders

1.2.6 CIRCULATING WORKPIECE TRANSPORT SYSTEM, O-VERSION
Drag frame system for 10 workpieces
Workpiece height (incl. pallet) max. 300 mm
Max. workpiece weight: 60 kg

1.2.7 SET (10 pcs) DRAG FRAMES for O-belt
For workpiece diameters 150 - 400 mm

1.2.8 BLOW-OFF FOR WORKPIECE AND CLAMPING DEVICE (PICK-UP)

1.2.10 COOLANT SUPPLY 15 bar
Coolant pump delivery capacity approx. 80 l/min at 15 bar.
COOLING UNIT (6.5 KW, water – air)
A cooling unit (with 2-circuit technology) regulates the machine’s thermal management. Spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW

1.2.11 COOLANT DOUBLE FILTER, MANUAL SWITCHOVER
Filter fineness 100 μm, with electronic and mechanical contamination indicator

1.2.12 CHIP CONVEYOR, HINGED BELT VERSION – REAR DISCHARGE
Chip discharge height: 1100 mm. With integrated coolant tank, capacity approx. 500 l.

1.2.13 EMULSION MIST EXTRACTION
Extraction capacity approx. 800 m3/h

1.2.14 RINSING GUN

1.2.16 WORKPIECE MEASUREMENT
With probe, fully protected against chips and coolant outside the work area.
Gedpfxew Hxuao Ah Dskc

1.2.17 PROBE BLOW-OFF

1.2.19 ENGRAVING SOFTWARE PACKAGE

1.2.20 TOOL LIFE MONITORING – SISTER TOOL MANAGEMENT

1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU – EUROPE
(SIEMENS 840Dsl, FANUC 31i/32i)

1.2.23 3-COLOR SIGNAL LIGHT

1.3.2 AXIAL DRILL-MILLING HEAD – BMT75 CC

1.3.3 ANGLE DRILL-MILLING HEAD 90° – BMT75 CC (i=1:1)

1.3.4 SET OF TOOLS FOR OP10 + OP20

1.3.7 HYDRAULIC POWER CHUCK CYLINDER Gr.150 – with 1 media feedthrough
Coolant is supplied to the workpiece through the main spindle and clamping device.

1.3.10 3-JAW POWER CHUCK KNCS-N 500-155 QUICK CHANGE
d max. = 2200 rpm (Reference speed per DIN 6386)
- Set of hard base jaws
- Set of soft top jaws

1.3.11 ACCESSORIES FOR KNCS-N 500-155
Consisting of:
- Chuck flange DIN 55026 A11
- Drawbar adapter with through-hole and shut-off valve for central air or coolant supply
- Mounting bolts

1.3.12 FLUSHING NOZZLE IN CHUCK BORE

Additional toolholders with tools

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.