Omara za sušenje Omara za ogrevanje

ELIOG Industrieofen DU 200/04-03-09 bis 200°C

Leto izdelave: 2023, Stanje: novo, IMMEDIATE AVAILABILITY! Vibratory Finishing Machines with Separator The VKUE series machines are suitable for surface processing of metallic and non-metallic workpieces. These machines feature a large screening area, enabling easy separation of workpieces from the abrasive media. Optional Accessories Prjdpfx Agon Smbrepsd - Pneumatic sound cover - Pneumatic flap control - Frequency control - Dosing pump - Magnetic valve - Basic control panel - Rinsing tube (various types available) The images are for reference only. Optional accessories are available at an additional cost.

Stanje: novo, Leto izdelave: 2025, Spray-Flood Cleaning System – Parts Cleaning Machine Washing (600 liters) + Rinsing (430 liters); electrically heated; The cleaning process can be performed via spraying, flooding (injection flood cleaning), and with ultrasonic support. The basket can remain stationary, oscillate, or rotate during the cleaning cycle (freely selectable via the program). Prodpfx Agehu Sg Iepjd Drying via hot air and vacuum drying. Basket usable dimensions (LxWxH): 600 x 400 x 300 mm Maximum load weight: 150 kg Loading table in front of the machine included Control: Siemens S7-1200 with 20 programs

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, READY FOR IMMEDIATE USE! This degreasing system operates under vacuum using modified alcohol. Degreasing of metal components contaminated with oil and chips from mechanical processing. Prodpohg Ugijfx Agped Usable solvents: modified alcohols Hydrocarbons class AIII (flash point > 55° C) Ultrasonic Weber 750W 40kHz Double loading table Double bag filter Oiling for corrosion protection (spraying) Cartridge filter Very good condition (the system has been used very little) 6 months warranty From Metalclean AG service System process: spraying, immersion, ultrasonic cleaning, vapor degreasing including vacuum drying. Data: Basket dimensions: 480 x 320 x 200 h mm Maximum loading weight: 50 kg Average batches per hour: up to 5 System dimensions: 1600 x 1600 x 2400 mm (h) System weight: 2300 kg Electrical power requirement: 16 kW Energy consumption: 10 kW/h Solvent volume: approx. 250 liters

Stanje: novo, Leto izdelave: 2018, For sale is an unused Rösler FKS 35 Tandem with soundproof cabin, manufactured in 2018. The system is still in its original packaging and available from our warehouse. You are welcome to arrange a viewing appointment on site after prior telephone consultation. Prjdpfx Ajl D Ex Djgpod

Stanje: novo, Leto izdelave: 2024, skupna višina: 860 mm, skupna dolžina: 2.400 mm, skupna širina: 1.200 mm, skupna masa: 920 kg, vrsta nastavitve višine: mehanski, Manufacturer: GERD WOLFF Technical Details: • Length: 2400 mm • Width: 1200 mm • Height: 200 mm • Weight: 920 kg • Hole diameter: 28 mm • Hole spacing: 100 mm • Plate thickness: 25 mm Advantages and Features • 3-day gas nitriding process • Increased corrosion resistance • Anti-adhesion protection against welding spatter • Maximum load capacity Podpfx Ajvbbqnjgperd • Enhanced fatigue strength • Improved vibration resistance • Fine scaling • Reinforcement by weld seams and ribs on the underside • Optimal working height: 820–865 mm • 6x height-adjustable support legs • Compatible accessory set available (optional) Our welding tables are manufactured using HT 300 cast quality and are gas nitrided as a complete unit following mechanical processing. Additionally, they feature precise fine scaling engraved using laser technology. To ensure adequate stability, our welding tables are reinforced on the underside with weld seams and ribs (see images). Furthermore, each table undergoes a 3-day gas nitriding process, which considerably enhances corrosion resistance as well as the tables’ fatigue and vibration strength. All of our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, the maximum is 665 mm. This allows for a variable working height from 820 mm to 865 mm. Other available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 The images do not depict the original size and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a renowned manufacturer. 3D welding table – 3D clamping systems – 3D precision welding tables

Leto izdelave: 2005, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 1.600 kg, največja dovoljena obremenitev: 1.000 kg, notranja višina: 1.200 mm, notranja dolžina: 1.390 mm, notranja širina: 1.390 mm, nazivna moč: 64.000 kW (87.015,68 KM), zmogljivost črpalke: 500 l/min, tlak črpalke: 450.000 letvica, kapaciteta rezervoarja za vodo: 800 l, številka stroja/vozila: 25191, Industrial machine and parts cleaning device. Equipped with 3 washing chambers: one main and two auxiliary. Technical condition: Excellent – used only a few times. Model number: C-1600-33EHSS-PD1 Serial number: 25191 List of main machine components: - Washing chamber door (with actuators) - Upper washing nozzle - Lower washing nozzle Pjdpforkz Stsx Agpjrd - High-pressure piping - Control cabinet - Main washing pump - Auxiliary pump 1 - Auxiliary pump 2 - Water heater (for each chamber) - Drain valve - Water level sensor - Parts washing basket - Oil separator - Steam vent - Water pressure indicators - Automatic water filling and chemical dosing system Additionally, the set includes a reverse osmosis water filter.

Leto izdelave: 2017, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Wiesheu EBO 60x80 Combi Oven, bouwjaar 2017 - Euromat 64 L 2600-A-FBBBCBAA Predpfxsp Sr N Rs Agped - EBO 68 M X1625-A-BBADA

Stanje: rabljeno, TECHNICAL DATA - Maximum workpiece dimensions: 650 x 420 [mm] - Maximum workpiece thickness: 160 [mm] - Maximum weight: 350 [kg] - Travels (X, Y, Z): 320 x 220 x 180 [mm] - Table traverse speed: 900 [mm/min] - Wire feed speed: 0 - 10 [m/min] - Wire tension: 80 to 2500 [g] - Wire guide: Ø 0.25 [mm] - Tank capacity: 260 [l] - Dimensions: 3,200 x 2,200 x 2,000 [mm] - Weight: 1,900 [kg] Prjdpfx Ageuhcbcepod EQUIPMENT - CNC FANUC 16W control - Cooling unit - Lubrication tank with pump - Automatic wire threading

Leto izdelave: 2006, Stanje: rabljeno, Ultrasonic and Electrolytic Cleaning, Wire Cleaning Line, Wire Cleaning System, Wire Treatment System Psdpof Nku Rsfx Agperd Manufacturer: Sirio-Wire Model: M0209 Number of wires/strands: 12 (6+6) Wire diameter: 1.0 – 5.5 mm; however, even thicker wires have been processed on the system with very satisfactory cleaning results. Year of manufacture: 2006 The system was operated for only around three years before production was relocated to another site. Process: Ultrasonic and electrolytic cleaning in hot bath A detailed description of the process can be found on the manufacturer’s website (siriowire) under 'Ultrasonic and Electrolytic Cleaning.' The system is in good, operational condition and is complete except for the pumps. In the photos, the operator catwalk and the collection tray that the system sits in are missing; these photos will be added shortly. The last three images show systems of this type in operation.

Stanje: novo, Table height: 800 mm Prsdpfx Agjfk Ailspjd Dimensions (LxWxH): 2980 x 1480 x 800 mm Table width: 1480 mm Table length: 2980 mm Weight approx.: 630 kg Special workbench systems of the SST, SFT, and SWT fix series serve as 3D clamping workstations for the efficient production of assembly, welding, and adhesive constructions, such as fixtures, railings, frames, etc. With the aid of the comprehensive range of clamping accessories (see catalog section: welding table accessories), these table systems can also be used as flexibly configurable fixtures, enabling high-quality production of small to medium series. The special workbenches feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick working surface equipped with a Ø28 mm hole grid. Additionally, the tabletop includes a 100 x 100 mm grid marking for easy alignment of workpieces and fixtures. The table perforation allows the use of a wide variety of clamping elements and positioning aids. For special applications, the tabletop surface can be optionally fitted with stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70, in deviation from the standard. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in case of wear. This design makes the table system especially durable and sustainable in use. Price must be reconfirmed with manufacturer before ordering!!