Elektromotor 11 kW 1460 RPM

Elektrim SSg 160M-4

Stanje: delavnici obnovljeno (rabljeno), Stock no. 2553 1 used, partially overhauled and function-tested extruder, consisting of: Material hopper Single-screw extruder BATTENFELD type UNI-EX 1-75-25 B Screw diameter: 75 mm – 25 L/D, barrel air-cooled Screw speed up to 130 rpm Drive 120 kW – DC (overhauled), drive via belt pulley Heating zone control sections for downstream equipment Control cabinet, melt pressure sensor Dusdpfx Asiyyndsflsl Inspection / test run possible at short notice by arrangement at our Wuppertal facility. Matching accessories available: > Screen changer > Pelletizing (strand, hot face cut, or water ring) > Miscellaneous Further extruders and complete lines are available for demonstration ex works Wuppertal. We look forward to your enquiry or your visit.

Leto izdelave: 1996, Stanje: dober (rabljeno), Weinig Unimat 23 Four-Sided Planer – Manufactured in Germany – Ribbed table – Year of manufacture: 1996 – Feed rollers embedded in the table TECHNICAL SPECIFICATIONS: planing width: 230 mm planing height: 160 mm ribbed table spindle diameter: 40 mm 1st bottom spindle: 7.5 kW 2nd right spindle: 7.5 kW 3rd left spindle: 7.5 kW 4th top spindle: 11 kW 5th bottom spindle: 7.5 kW infinitely adjustable feed speed: 6–36 m/min Dusdpfx Afeh Dwl Delol feed motor power: 5.5 kW six driven top steel rollers two driven top rubber rollers three feed rollers in the table pneumatic feed pressure pneumatic shoe pressure spindles with brakes length of infeed table: 1970 mm electric height adjustment central lubrication (divided) diameter of dust extraction outlets: 140 mm machine dimensions (L/W/H): 410 / 200 / 180 cm weight: approx. 3000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Vecoplan VAZ 1300 Shredder Hopper inlet: 2.26 m x 1.65 m Duedpfx Aswu Nwheflel

Leto izdelave: 1999, Stanje: rabljeno, Used Entex Extruder PL-WE150 complete with control cabinet, previously used for powder coatings, in good condition. Dujdpfobqt Arjx Aflol We can also offer you an Entex PL WE 70!

Leto izdelave: 2003, Stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 1 used, partially overhauled in 2023, underwater pelletizing system Dedpfx Afeiyyf Isljul Throughput up to approx. 450 kg/h depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: Complete compounding and pelletizing lines with single-screw or twin-screw extruders.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Skoraj nov sekalnik Vecoplan VTH 250x650 HxB Moč: 75 kW Dsdpjxtif Hefx Aflsul Cassel detektor kovin Približno 40 tekočih metrov vibrirajočih žlebov

Leto izdelave: 2022, Stanje: novo,

Leto izdelave: 2004, Stanje: dober (rabljeno), Manufacturer: Hein Lehmann Size: 2,000mm x 6,300mm Duedpfx Aeh Ty Tqsfljl Decks: 1 Year of manufacture: 2004 With frame.

Leto izdelave: 2002, Stanje: delavnici obnovljeno (rabljeno), Fully automatic finger jointing line: Type Doppel-Pack with automatic infeed with multi-blade cross-cut saw with stacking unit Specification: Wood infeed length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Outfeed wood length: 6030 mm Max. wood cross-section with 10 mm finger size: Hardwood 120 cm² Softwood 150 cm² Finger joint execution vertical and horizontal Glue type: PVAC white glue, double-sided glue application Electrical data: Dusdpfx Asg D Ugkoflol Connection voltage: 400 V Control voltage: 24 V 50 Hz Plant completely wired up to the control cabinet. Finger length / possible wood cross-section and glue type can still be adapted Performance: 6 milling tables/min Working height: 960 mm Table width: 600 mm Glue application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Table width: 600 mm Glue application: double-sided application

Leto izdelave: 1997, Stanje: zelo dobro (rabljeno), Einwellenzerkleinerer von Weima Dedpfxsivptts Afloul Modell: WL6S Hauptantrieb: 22 kW