Elektromotor 5 kW 1450 vrt / min

Elektrim eRFY55/4-5

Stanje: delavnici obnovljeno (rabljeno), Stock no. 2553 1 used, partially overhauled and function-tested extruder, consisting of: Material hopper Single-screw extruder BATTENFELD type UNI-EX 1-75-25 B Screw diameter: 75 mm – 25 L/D, barrel air-cooled Screw speed up to 130 rpm Drive 120 kW – DC (overhauled), drive via belt pulley Heating zone control sections for downstream equipment Control cabinet, melt pressure sensor Inspection / test run possible at short notice by arrangement at our Wuppertal facility. Matching accessories available: > Screen changer > Pelletizing (strand, hot face cut, or water ring) > Miscellaneous Dodpfxeiyyndo Aflsul Further extruders and complete lines are available for demonstration ex works Wuppertal. We look forward to your enquiry or your visit.

Leto izdelave: 2003, Stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Dujdjiyyf Iepfx Aflel Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: Complete compounding and pelletizing lines with single-screw or twin-screw extruders.

Stanje: novo, Leto izdelave: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with reversible rotation (right/left) Large-dimensioned cast iron milling unit, mounted directly on the table With extraction hood beneath the worktable for improved dust removal Solid and precise cast iron table Quick and effortless speed changes High-performance 5.0 kW motor Standard safety hoop guard Quality made in Italy Equipment details Cast iron milling unit: Mounted directly on the milling table Dsdpfxjhp Rcrs Afleul Milling spindle mounted high with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful motors Equipped with a robust three-phase motor Milling protection The standard milling guard comes with a height-adjustable guide rail and protective plate for maximum safety Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw Integrated extraction port ensures clear visibility Table opening A large table opening enables the use of larger panel raising cutters as well as tenoning and slotting tools both above and below the table Safety hoop guard Supplied as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap Enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx.: 240 kg Extraction Extraction port diameter: 2 x 120 mm Worktable Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation details Required space length: 1,945 mm Machine body width/depth: 575 mm Required space width/depth: 920 mm Working area length: 1,600 mm Note on space requirements: The specified dimensions take into account the maximum travel or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Note on working area: Please add the specified measurements to the required space to obtain the recommended free area for the machine. Electrical data Supply voltage: 400 V Drive motor power: 5.0 kW Network frequency: 50 Hz Milling spindle Usable spindle length: 100 mm Spindle speed(s): 3,500 / 7,000 / 10,000 rpm Spindle projection max. above table: 130 mm Spindle shaft diameter: 30 mm Milling tool diameter, max. Max. lowerable tool diameter: 180 mm SCOPE OF DELIVERY Safety hoop guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Stanje: rabljeno, številka stroja/vozila: 9993, 9-knife rotor 3 stator knife rows Rotor diameter: 400 mm Working width: 500 mm Infeed cross-section for window profile bars Djdjghgnispfx Afloul approx. 200 x 460 mm Drive motor: 30.0 kW

Leto izdelave: 1986, Stanje: zelo dobro (rabljeno),

Stanje: novo, Main machine features: The TH 530 thickness planer is a straightforward, robust design intended for daily workshop use, featuring a planing shaft width of 530 mm. It is equipped with a large, heavy-duty, ribbed cast iron table, which eliminates any vibrations during operation. The machine boasts an exceptionally powerful motor driving the cutterhead (equipped with serrated knives), ensuring that even the most challenging wood planing tasks are handled with ease. Each knife is easily replaceable in case of wear or damage. Table height adjustment is automatic after entering the required dimensions. These advantages enable highly precise cutting settings. Djdohhnfwjpfx Aflsul Highlights: - Worktable mounted on 4 threaded rods - Electronic control for automatic table height adjustment - Planer shaft ø120 mm, 4 knives - Suitable for processing large workpieces Max. planing width: 530 mm Max. planing height: 300 mm Min. length of workpiece: 400 mm Cutterhead diameter: 120 mm 2 feed rollers in the table Number of knives: 4 Knife dimensions: 530x30x3 mm Cutterhead speed: 5,000 rpm Power supply: 400 V Total power: 5.8 kW 2 feed speeds Electric table lift Extraction port: 150 mm Machine available immediately! Machine dimensions: Length: 1,000 mm Width: 1,000 mm Height: 1,160 mm

Stanje: rabljeno, številka stroja/vozila: 10461, 3-knife rotor (offset knives) 2 rows of stator knives Rotor diameter 300 mm Working width 600 mm Djdjghgg Rspfx Afloul Infeed opening approx. 440 x 600 mm

Stanje: pripravljen za uporabo (rabljen), HEW R 160M/6-4 L motor, serial number as per photo, mounting holes spacing: 255 x 210 mm, drive shaft diameter: 42 mm, used, normal signs of use, 100% fully functional, scope of delivery as shown in photos. IMPORTANT: Costs for packaging and shipping to be requested separately! ATTENTION: Please enquire for charges for packing and transport separately! Dsdpfx Afsi D Ictoloul

Stanje: rabljeno, Three-phase motor, electric motor - Power: 11 kW - Speed: 1,460 rpm - Shaft: Ø 42 x 110 mm - Mounting: B3 - Protection class: IP55 - Dimensions: 600/315/H365 mm - Weight: 103 kg Dedpfxefitfis Afljul

Stanje: rabljeno, Three-phase motor, electric motor Duedecu Erxjpfx Aflel - Power output: 11 kW - Speed: 1,450 rpm - Shaft diameter: Ø 42 mm - Design type: B3 - Protection class: IP 33 - Dimensions: 600 x 360 x H370 mm - Weight: 116 kg