Hidravlična stiskalnica

EITEL EP160

Leto izdelave: 2018, Stanje: zelo dobro (rabljeno), For processing aluminium and steel profiles Fully functional, in very good condition Year of manufacture: 2018 Processing length: 7,200 mm 3-axis control with 15” screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control unit Safety light barrier at the front and side safety fence Minimum quantity lubrication Centralised lubrication Thread cutting without compensating chuck Simple programming via the control unit High-speed spindle up to 18,000 rpm Incl. 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Predpfx Aewynitegpjd Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Travel speed X/Y/Z-axis [m/min]: 60/60/60 Max. milling cutter diameter: 25 mm Max. saw blade diameter: 180 mm Max. tool length: 200 mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total operating hours: 30,844 h Total spindle hours: 11,583 h

Stanje: novo, New lathe with large spindle bore. Brand: KMS Model: CS6250C Centre distance: 1000 mm Swing over bed: Ø 500 mm Swing over cross slide: Ø 300 mm Swing in gap: Ø 710 mm Turning length in gap: 240 mm Bed width: 390 mm Spindle bore: Ø 105 mm Spindle speeds: 12 steps (36 - 1600 rpm) Tailstock quill diameter: 75 mm Tailstock travel: 150 mm Tailstock taper: MT 5 Machine dimensions: approx. 2630 x 975 x 1270 mm (L x W x H) Machine weight: approx. 2100 kg Machine equipped with: - Longitudinal and cross feed - Rapid traverse in both longitudinal and cross feed - Movable and adjustable stops for automatic longitudinal feed - Leadscrew for threading (metric/inch/module/DP threading possible) - Quick-change tool post, type Multifix - 2-axis digital readout (Brand: Sino) Psdpfxjhhm Eds Agpord - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock) - 4-jaw chuck Ø 400 mm, bore 105 mm (Camlock) - Faceplate Ø 630 mm (Camlock) - Steady rest Ø 120–260 mm - Follower rest Ø 20–80 mm - Coolant system

Stanje: dober (rabljeno), Leto izdelave: 1977, Pressure: 250 t Clearance between uprights: 1120 mm Stroke: 250 mm Distance table/ram, max. stroke up, max. adjustment up: 500 mm Table size: 1100 x 900 mm Table height above floor: 950 mm Lateral upright passage: 700 mm Ram area: 1100 x 900 mm Downward speed: mm/s Upward speed: mm/s Working speed: mm/s Oil capacity: 730 l Drive power: 56 kW Weight: 25 t Prodpfxex Ug De Agpjd Space requirement (W x D x H): 2.3 x 1.55 x 3.96 m Additional information: Equipped with electro-hydraulic drive, hydraulic (20) and electric control system according to UVV regulations, light curtain (Sick), upper and lower stroke limitation, pressure- and position-dependent control, shear-blow damping, short-stroke control, new control system (Mitsubishi), safety controller (PNOZ Multi), screen control with touch-screen, control cabinet

Stanje: novo, Leto izdelave: 2025, Centre height: 250 mm Spindle bore: 103 mm Centre distance: 1,000 mm Swing over bed: 500 mm Psdpfod I A Dhox Agpsrd Swing in gap: 710 mm Swing over cross slide: 300 mm Speed range: 9 - 1,600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Diametral pitch threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Quill travel: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2,750.00 kg Dimensions: 2,500 x 1,100 x 1,380 mm

Stanje: rabljeno, Leto izdelave: 2007, Speed 2800 RPM Drill diameter 2 - 40 mm Drill length 200 mm Point angle 40 - 180° Total power requirement 0.76 kW Machine weight approx. 170 kg Space requirements approx. 850 x 850 x 1200 mm Equipment: - Chuck - Coolant system - Machine lamp - Operating manual Pjdpfevdxz Aex Agpjrd

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 330 mm, izvrtina vretena: 78 mm, premer struženja nad ležiščem sani: 520 mm, višina središča: 260 mm, stružna dolžina: 1.000 mm, poteza s peresom: 127 mm, premer tulec: 68 mm, skupna dolžina: 2.160 mm, skupna širina: 810 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 20 obr/min, širina postelje: 300 mm, skupna masa: 1.810 kg, nosilec puše: MK 4, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Centre height: 260 mm Centre distance: 1000 mm Spindle bore: 78 mm Spindle nose to DIN 55029 Camlock D8 Spindle speed range: 20–2000 rpm Predpfx Agsh Rvxhepsd Drive power: 7.5 kW Equipment includes: - Infinitely variable speed control - Hardened and precision-ground Z-axis guideways - Turcite coatings (on the counter-surface) of the carriage and cross slide - Manual central lubrication with a pump for the longitudinal and cross slides - Complete coolant system with rear splash guard and splash guard on the carriage - Chuck guard - Control rod with 3 adjustable cams - Machine lamp - Fixed centre - Set of machine mounting plates

Stanje: novo, Pressure: 30 t Stroke: 350 mm Table working area (width): 750 x 260 mm Pressure: 221 bar Oil capacity: 37 dm³ Maximum working speed: 9.8 mm/sec Return speed: 14 mm/sec Total power requirement: 3 kW Machine weight: approx. 385 kg Cylinder inner diameter [mm]: 130 Piston rod diameter [mm]: 55 Piston bottom diameter [mm]: 80 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with variable speeds Prsdpfx Agji A S I Dopod - Height-adjustable worktable - Joystick for piston and speed control The workshop press (30T) features a fixed cylinder and a motorized, height-adjustable worktable. It is equipped with pressure regulation, a pressure gauge, variable speed settings, and a joystick for controlling the piston movement and speed. The joystick allows both vertical piston movement and speed adjustment, making this motorized hydraulic press ideal for precision work.

Stanje: dober (rabljeno), Proizvajalec: WEINGARTEN Tip: ER 125 Velikost mize: 800x620 mm Prsdpfen D Ebaex Agpjd Na nosilnem delu stiskalnice je vidna majhna razpoka; bila je tako uporabljena leta. !!

Stanje: dober (rabljeno), Leto izdelave: 2002, številka stroja/vozila: 022885001, Offer 24342 Technical Data: - Fully automatic saw with hydropneumatic feed and MPS control Prodpfx Ajt N Rk Nsgpsd - Pre-programmable work cycles with infinitely variable speed regulation - Especially suitable for stainless steel cutting - Workpiece clamping in pneumatic machine vice - Saw blade diameter: 370 mm - Cutting speeds steplessly adjustable: 15 – 70 rpm - Mitre adjustment: right up to 45°, left up to 45° – 60° - Cutting capacity at 90°: round 130 mm, rectangle 180 x 100 mm, square 120 x 110 mm - Mitre cutting at 45°: round 130 mm, rectangle 120 x 100 mm - Maximum opening width of pneumatic machine vice: 160 mm - Drive: 400 V / 3 kW - Pneumatic connection: 6 – 8 bar - Coolant equipment - Infeed roller conveyor: 1000 mm - Outfeed roller conveyor with stop and digital measuring device: 4000 mm - Required space approx.: W 7500 x H 2050 x D 1100 mm - Weight approx.: 1200 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max.: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, infinitely adjustable Electronic saw height control Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Predpsuiy Ngefx Agpod Working range, round at 90° max.: 170 mm The machine has been completely overhauled in-house and is in as-new condition. Among other improvements, the following upgrades have been performed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to pusher with servo control - New electrical components - New pneumatic hoses - New pneumatic components - Conversion to valve manifold - Enhanced extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishment of the enclosure The machine is further equipped with: - Minimum quantity lubrication - Chip separator extension (for high-quality cut surfaces without return marks) - Preload magazine for careful handling of painted/anodized surfaces - Scrap piece ejection via pusher - Hinged scrap piece tray Optional features: - Magazine width: 3000 mm - Pusher length: 6000 mm - Pusher length: 8000 mm - Motor upgrade: 5.5 kW - Bar clamping device for parallel cutting of multiple workpieces - Online support connection - Delivery and commissioning at your facility - Operator training