Hidravlične giljotinske škarje

EHT ECOCUT I / 10-31

Stanje: dober (rabljeno), Leto izdelave: 1977, Pressure: 250 t Clearance between uprights: 1120 mm Stroke: 250 mm Distance table/ram, max. stroke up, max. adjustment up: 500 mm Table size: 1100 x 900 mm Hfedox Ug Depfx Ab Ter Table height above floor: 950 mm Lateral upright passage: 700 mm Ram area: 1100 x 900 mm Downward speed: mm/s Upward speed: mm/s Working speed: mm/s Oil capacity: 730 l Drive power: 56 kW Weight: 25 t Space requirement (W x D x H): 2.3 x 1.55 x 3.96 m Additional information: Equipped with electro-hydraulic drive, hydraulic (20) and electric control system according to UVV regulations, light curtain (Sick), upper and lower stroke limitation, pressure- and position-dependent control, shear-blow damping, short-stroke control, new control system (Mitsubishi), safety controller (PNOZ Multi), screen control with touch-screen, control cabinet

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, obratovalne ure: 164 h, delovna širina: 3.100 mm, obratovalna hitrost: 8 mm/s, hitrost vzvratne vožnje: 75 mm/s, skupna masa: 10.500 kg, skupna dolžina: 4.500 mm, skupna širina: 1.700 mm, skupna višina: 2.500 mm, vhodna napetost: 380 V, stiskalna sila: 200 t, moč servomotorja: 15 W, Z ročnim navodilom, seznamom delov in vso razpoložljivo tehnično dokumentacijo. Hfodpfovm Elasx Ab Tor

Stanje: rabljeno, Leto izdelave: 1986, Sheet thickness 6.0 mm Pressure 18 t Shearing angle - upper blade 90° Blade length 225 x 225 mm Hedpsg Ip Efofx Ab Tofr Operating voltage 380 V Total power requirement 5.5 kW Machine weight approx. 650 kg Space requirement approx. 1.10 x 0.80 x 1.05 m - Adjustable angle stops

Stanje: novo, zadnji prislon: 750 mm, - Capacity 1050 x 6 mm - NC electric backgauge - Foot pedal - Rear photocell safety guard - Support arms - Cutting line illumination - Brake motor - Emergency stop Hodpjgg N Hbsfx Ab Tefr - Documentation - Weight: 1800 kg - 400V

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Technical Data: Maximum cutting width: 3100 mm Hsdpeummw Tjfx Ab Tofr Maximum cutting capacity with St40 steel: 15.0 mm Motorized adjustable back gauge: 1500 mm Motorized adjustable cutting gap Adjustable cutting angle Working height: 860 mm Motor power: 22 kW Side safety guard with rear light barrier Dimensions (L x W x H): approx. 4650 x 3600 x 2050 mm Weight: approx. 13.5 t We are only able to display a small selection of our current range of used machines here. Please also visit our homepage! The seller accepts no liability for typing or data transmission errors. The machine's condition regarding appearance, technology, and wear is consistent with its age; used machines are sold without any guarantee.

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm Hodpfxonh R Ekj Ab Tsfr • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Leto izdelave: 1993, Stanje: rabljeno, Bending length: 3,000 mm Clearance between uprights: 2,750 mm Max. pressing force: 180 t Control system: CYBELEC DNC70 Throat depth: 220 mm Hfedpfxskh Niqe Ab Tsr Total power requirement: 15 kW Machine weight: 11,000 kg

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Blast container for blasting with glass beads, ceramic, corundum, chilled iron grit, garnet sand, etc. The blast container features a fully covered screw conveyor floor and a genuine abrasive recycling system. No more sweeping, vacuuming, or shoveling of abrasive in the blast chamber while processing your workpieces, thanks to our recirculation system. Abrasive cleaner windsifter with four-way adjustment: airflow volume, flow speed, extraction proximity to the abrasive, and abrasive bed height setting. Electric vibrating screen for continuous coarse separation. Bucket elevator with trapezoidal thread spindle for belt tensioning and speed monitoring. Container lining made of 4mm, 70 Shore fabric-reinforced rubber guarantees a service life of up to 30 years when used correctly. The container can be fully opened from the side for simple forklift loading. The container can be upgraded with crane roof hatch, floor reinforcement, or lateral blast chamber extension. For stainless steel blasting, the container can be equipped with an actual magnetic drawer or drum-type magnetic separator, as well as a stainless steel grating. Filter unit with easy-maintenance access doors, big bag dust collection, secondary filter H13/14, and silencer. Blast pot with pressure regulator and water separator. The container is characterized by its reliability and easy maintenance. All system components are easily accessible at the rear of the container. Only 4 ball bearings on the screw conveyor floor and 4 ball bearings on the bucket elevator. Special warranty of 5 years included on all essential components of the blasting system. Safety features: door/gate limit switches, dead-man control, emergency lighting, blast chamber viewing window, emergency stop inside the blast chamber and on the control cabinet, quick-release pressurized vessel vent. Hodpfxeuwlzys Ab Tsfr

Stanje: dober (rabljeno), Leto izdelave: 1982, Cutting capacity: 13 mm, cutting length: 3050 mm, motorized rear gauge: 1000 mm, support arms: 1000 mm with scale, adjustable cutting angle, adjustable blade gap, 22 kW motor, foot pedal Hedpfxjizkm Ee Ab Tefr

Stanje: pripravljen za uporabo (rabljen), najv. debelina jeklene pločevine: 10 mm, zadnji prislon: 1.000 mm, moč: 21 kW (28,55 KM), skupna dolžina: 4.330 mm, skupna širina: 2.200 mm, skupna višina: 2.110 mm, lastna masa: 10.000 kg, dolžina obdelovanca (maks.): 3.100 mm, CNC Elgo zadnji prislon Ročna nastavitev zračnosti rezila Zadnja varnostna zaščita Udarec/min: 9 > 40 udarcev/min Nastavljiva rezalna naprava: 0,1 > 1,5 mm Hfodpfxev Taias Ab Ter Nastavljiv rezalni kot: 0,5° > 2,5° Potrebna napetost: 380V Število držal za pločevino: 17x