Stresalnik mikrotitrskih plošč

Edmund Bühler 6166 000

Stanje: novo, Swing diameter 420 mm Turning length 1500 mm Swing diameter over cross slide 250 mm Swing diameter in the bed gap 590 mm Center height 210 mm Turning length in the bed gap 260 mm Spindle speed(s) 16 (45-1800) rpm Tailstock taper MK 4 Quill stroke 120 mm Bljdpfx Ask Egrpofqor Quill diameter 50 mm Spindle nose DIN ISO 702-2 No. 6 Spindle bore 52 mm Spindle taper MK 6 Longitudinal feed 17 / 0.05 - 1.7 m/min Face feed 17 / 0.025 - 0.85 m/min Total power requirement 4.6 kW Machine weight approx. 1340 kg Space requirement approx. 2440 x 915 x 1375 mm Fully equipped lead and feed screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduation 0.04 / 0.02 mm - Four-way tool post - All guides adjustable with gib strips - Top slide adjustment range ± 90° - Guaranteed spindle nose concentricity better than 0.015 mm - Main spindle runs in oil bath - Gear wheels smooth-running, hardened and ground, mounted with 2 adjustable precision taper roller bearings - Handwheels decoupled and tested to EN 23125 - Two-channel right-left selector switch tested to EN 23125 - Switches with life cycle calculation, tested to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI adjustable via control panel shift lever, no change gears required - Forward/reverse on carriage operable via shift spindle - Central lubrication in carriage - Machine base and bed cast as single Meehanite piece - Leadscrew cover - Emergency stop pedal - Safety handwheels with disengagement function in X and Z axes - Tailstock adjustable ± 10 mm for taper turning - Tailstock quill and handwheel with adjustable fine graduation 0.025 mm - Rapid, simple, tool-free adjustment via clamping lever - Strongly ribbed prismatic bed, induction-hardened and precision ground, made of cast iron - Coolant system with separate tank, fill level indicator, and oil separator; easy and complete draining and cleaning to DIN standard - LED machine lamp at chip guard Models TH 4210D and TH 4215D with digital position display DPA21 - User-friendly membrane keypad, splash-proof, sealed and glare-free - Glass linear scales Scope of delivery - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MK 6 / MK 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial machine fill with quality oil - Operating tools Including special accessories: OPTIMUM 3-jaw lathe chuck, self-centering, Ø 250 mm Quick-change tool post SWH5-B set

Stanje: novo, *Technical Specifications: - Air-cooled, 25.5 kW based on +10°C supply temperature at an ambient temperature of +32°C - Supply temperature range: +5°C to +30°C (Optionally, lower temperatures down to -5°C possible) - Air flow rate: 8,000 m³/h - Max. air inlet temperature: +30°C - Optional heating capacity up to 24 kW *Pumps: - Delivery rate up to 150 l/min - Delivery pressure up to max. 4 or 7 bar - Motor power: 1.1 or 2.2 kW Bodpsg Ewwrofx Afqolr *Dimensions: - L/W/H: 1,450 mm x 750 mm x 1,680 mm - Unladen weight: approx. 480 kg - Circulating medium connection: DN 32 internal thread *Details & Highlights: - Internal refrigerant: R 123 a - Power supply: 380-425V/50Hz - Control and regulation unit SBC-T - Setpoint and actual value display, alarm indication - Fully hermetic reciprocating compressor - Refrigerant collector with safety valve according to DIN EN 378 - Capacity control - Frost protection monitoring - Flow monitoring - Protective grid over condenser - Oil sump heater - Draining device - Level monitoring via float magnetic switch - Installed dirt trap in the return line of the circulating medium - Bypass valve between supply and return for pump protection, set at the factory - High and low pressure limiter according to DIN EN 378 - Stainless steel tank, capacity: 80 litres, open system, fully insulated - Self-supporting chassis with castors, mobile - System designed for indoor installation - Control cabinet: IP 54 Other performance categories available upon request. Visit our website for further details. *This device complies with European directives. Other directives and standards are only met if explicitly stated in the order confirmation. This technical specification reflects the standard configuration. Customer-specific requirements deviating from the standard will be specified in offers or order confirmations.

Leto izdelave: 2021, Stanje: rabljeno, We are selling our chemical nickel working tank. Bedpfeqzgb Ssx Afqslr The tank is made of acid-resistant stainless steel and is electropolished on the inside. Equipped with a Sager and Mack pump and filter. Includes a Munk Protektostat, frequency converter for the pump, and a heater with control unit and timer. Heating time from 10–93°C is approx. 1 hour 30 minutes. Internal dimensions: L1200 x W600 x H950 mm. The fill height is 880 mm, corresponding to a volume of approx. 635 litres. Installation dimensions: L2100 x W900 mm. Total connected load: approx. 50A. Upon request, we can also offer a customised solution for you.

Stanje: dober (rabljeno), Keyence Model: VR-6200 + VR-6000 Technical Data: Measurable XY range: 300 mm × 150 mm *2 Object table XY travel: 278 mm × 134 mm Z travel: 69 mm Load capacity: 4.5 kg Working distance: 75 mm Imaging device: 4-megapixel CMOS, monochrome Macro mode: Magnification (based on a 15-inch monitor): 12× Horizontal: 24.0 mm Vertical: 18.0 mm Magnification (based on a 15-inch monitor): 25× Horizontal: 12.0 mm Vertical: 9.0 mm Magnification (based on a 15-inch monitor): 38× Horizontal: 8.0 mm Vertical: 6.0 mm Magnification (based on a 15-inch monitor): 50× Horizontal: 6.0 mm Vertical: 4.5 mm Micro mode: Magnification (based on a 15-inch monitor): 40× Horizontal: 7.6 mm Vertical: 5.7 mm Magnification (based on a 15-inch monitor): 80× Horizontal: 3.8 mm Vertical: 2.9 mm Magnification (based on a 15-inch monitor): 120× Horizontal: 2.5 mm Vertical: 1.9 mm Magnification (based on a 15-inch monitor): 160× Horizontal: 1.9 mm Vertical: 1.4 mm Zoom: 1× to 4× Bodjr Dby Ispfx Afqelr Display resolution: 0.1 μm Height measurement range Without image stitching in Z Macro mode: 10 mm Micro mode: 1 mm With image stitching in Z Macro mode: 50 mm Micro mode: 30 mm Repeatability (σ) Without image stitching in Z 0.4 μm *1 With image stitching in Z 1.0 μm *1 Measurement accuracy Without image stitching in Z ±2.5 μm *1 With image stitching in Z ±4.0 μm *1 Only 50 operating hours! Includes software CD, without PC! Condition: (like new!) For further technical information, please refer to the manufacturer. Scope of delivery: (As illustrated!) (Specifications subject to change and errors excepted!) Should you have any questions, we are happy to assist you by phone.

Stanje: novo, VHX-600E, Keyence Digital Microscope - New Model: VHX-600E Type: VHX-600E Bljdpfx Asq S Ti Esfqjr Condition: New

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 240 V, vhodna frekvenca: 60 Hz, Used Keyence Digital Microscope VHX 600E set in flight case Manufacturer: Keyence Model: VHX 600 E Voltage: 100-240 VAC (50/60 Hz) Set consists of: - Digital microscope computer + power cable - Digital camera - Lens - Camera holder + mount - Keyboard + mouse Bjdpfx Ajv Dh Ryefqolr - Console controller - Flight case

Stanje: nepreverjeno (rabljeno), merilnik debeline sloja Bsdpoim Sc Sofx Afqolr

Stanje: rabljeno, DHS 1-G / DHS1G, Feinmess Dresden GmbH Display Handling System SN:020702 Bodpfoq S Tdgex Afqslr Model: DHS1-G Condition: Used