Električna stiskalnica CNC - 40 ton

DURMA AD-ES 1240

Leto izdelave: 2024, Stanje: novo, The DA-69T controller offers both 2D and 3D programming, including automatic calculation of bending sequences and collision detection. Complete 3D machine setup covers multiple tool stations and provides instant feedback on product feasibility and handling. DA-69T Features: • 3D and 2D graphical touchscreen programming operation • 3D visualization in simulation and production modes • 17-inch high-resolution TFT color display • Full Windows application suite • Compatible with Delem Modusys (modular scalability and adaptability) • USB and peripheral interface • Open system architecture • Sensor bending and correction interface • Profile-T3D offline software • Significant contribution to environmental protection – combating climate change and the greenhouse effect for the benefit of future generations. • Fully electronic drive • Up to 30% higher productivity • Up to 50% energy savings thanks to start-stop technology • Faster than a hydraulic press brake • Lower operating costs • Significantly reduced service and spare part costs (the electric press brake is technically much simpler and nearly maintenance-free) • No harmful oils required • Quiet – efficient – independent of hydraulic oil – low-noise operation • More relaxed and stress-free bending • Full working area • Touchscreen operation Machine dimensions: (L x W x H): 2,150 mm x 1,650 mm x 2,800 mm Technical details: Bending length: 1,250 mm Clear distance between uprights: 1,300 mm Pressing force: 400 kN (40 tons) Controller: CNC ModEva 19T Backgauge controlled axes: X, R (Z optional) Stroke length: 200 mm Installation height: 440 mm Table width: 104 mm Table height: 1,000 mm Throat depth: 410 mm X-axis travel range: 650 mm X-axis travel speed: 500 mm/s Approach speed (Y): 180 mm/s Bending speed (Y): 20 mm/s Working speed (R): 350 mm/s R-axis travel range: 250 mm Motor power: 7.5 kW Weight: approx. 4,500 kg Standard equipment: Cybelec ModEva 19T controller CNC-controlled crowning Upper clamping system: Durma (European) Kjdpfxod Sak Ss Ahvsnd Lower clamping system: 60 mm holder Backgauge: AC servo motors with ball screw drive Options included: Fiesseler AKAS II M FPSC-B-C safety system Controller: Delem DA 69T CNC-controlled backgauge X, R, Z1, Z2 Hydraulic upper tool clamping Durma (Type Wila) Hydraulic lower tool clamping Durma (Type Wila) Hydraulic power pack for clamping D-Bend simulation software The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. More machines are available, ready for demonstration, at our Staufenberg facility. Further information is available on request.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, laserska moč: 6.000 W, najv. debelina pločevine: 25 mm, najv. debelina jeklene pločevine: 25 mm, teža obdelovanca (maks.): 800 kg, skupna masa: 5.000 kg, skupna dolžina: 5.000 mm, skupna širina: 2.500 mm, skupna višina: 2.200 mm, trajanje garancije: 12 meseci, dolžina podajanja os X: 3.000 mm, dolžina pomika po osi Y: 1.500 mm, delovno območje: 3.000 mm, With the OR-S1530, Oree Laser offers a compact and user-friendly large-format laser cutting system. Our company, SF-Tech Engineering GmbH, is the official Swiss representative of Oree Laser. All machines are newly imported and assembled to customer specifications. Training and after-sales service are also provided by us. In our showroom, you can test the OR-S1530 together with all accessories (high-pressure compressor, extraction system, etc.). Technical Data Working area: 3060mm x 1530mm External dimensions: L: 4950mm, W: 2300mm, H: 2130mm Weight: approx. 4,500kg Positioning accuracy: 0.03mm Max. cutting speed: 115m/min Maximum acceleration: 0.8G Laser power: 6,000 Watts Kjdpfx Ahor D N Dzjvond Laser source: MAX Cutting head: Raytool or BOCI Fume extraction: Zone-controlled extraction The side machine door can be easily raised or lowered at the push of a button. The total height of the machine is 2,200mm. The worktable can be slid sideways out of the machine by hand, allowing safe and efficient loading and unloading. There are now two versions available: 1. 60% pull-out table, without ground support, max. load capacity 800kg. 2. 120% pull-out table, with folding support arms, max. load capacity 900kg. Don’t hesitate to visit us in our showroom at 6281 Hochdorf.

Stanje: dober (rabljeno), Leto izdelave: 2012, • Euromac MTX Flex 12 1500/22/2500 • Extensive tooling package included. • Year of manufacture: 2012 • Multitool 6 • Multitool 10 • CE safety features • Table extensions up to 4 meters • Vacuum system • X-axis 2500 mm with repositioning up to 10,000 mm • Y-axis 1500 mm MTX Flex 12 features: Knjdpfx Ahowk Ntujvsd • 3 auto-index stations, Type D – 360° programmable • 3 fixed stations, Type D • 6 fixed stations, Type B with ACTIVE Die System • Direct DRIVE system • Automatic repositioning of hydraulic sheet clamps • Standard 2 sheet clamps • Easy sheet loading system • Automatic lubrication of multitool and tool holders • Moveable operator console • Machine software: TPT (TOP PUNCH TOUCH) with 21.5” LED touchscreen • Table with brushes • Front folding table (L 850) • External cooling system • UPS system: protects the console PC from voltage dips and ensures up to 30 minutes power supply in case of power outage • Die holders: 2x D, 1x C, 2x and 1x B to A adapter • Punch adapters: D/B, D/C, B/A • Operating instructions (hard copy and digital) • Prepared for online service (internet connection required) • USB memory stick • Electrical preparation for loading and unloading system.

Stanje: rabljeno, Leto izdelave: 2014, Swing over bed: 508 mm Turning length: 724.5 mm Control system: Hurco Ultimax Swing over cross slide: 336 mm Spindle speeds - stepless: 0-4500 rpm Spindle bore: 65 mm Feed rates: 0-30 m/min Rapid traverse in X and Z axes: 30 m/min Ksdpfjv T Np Aox Ahvsnd Operating voltage: 400 V Connected load: 30 kVA Cross slide travel: 203.2 mm Longitudinal travel: 580/640 mm Required space approx.: 4.3 x 2.1 x 2.6 m Tool speeds: 0-5000 rpm Tool drive power: 5.5 kW Main drive motor: 15/22 kW Machine weight approx.: 5.6 t C-axis: 360 x 0.001 ° Equipped with a 12-position turret with driven tool stations (C-axis), sub-spindle, power chuck, coolant system, and chip conveyor. Control: Hurco Ultimax. Comes with extensive accessories.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 800 mm, pomik po osi Z: 800 mm, širina mize: 700 mm, dolžina mize: 2.000 mm, Control: HEIDENHAIN TNC-426 X-axis travel: 2000 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Taper: ISO 50 Knedovfr Hbopfx Ahved Speed range: 20 – 3000 rpm Spindle power: 17 kW

Stanje: novo, potovalna razdalja osi X: 5.000 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 1.500 mm, hitro pomikanje X-os: 30.000 m/min, hitri pomik os Y: 30.000 m/min, hitri pomik na osi Z: 30.000 m/min, položaj glave za glodanje: Universal-Diagonal-Fräskopf, največja hitrost vretena: 6.000 obr/min, širina mize: 1.100 mm, obremenitev mize: 14.000 kg, dolžina mize: 5.100 mm, skupna masa: 35.000 kg, vrtilni moment: 1.178 Nm, moč vretenovega motorja: 53 W, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, POVSEM NOVA POSTELJNA REZKALNA STROJ Krmiljenje in motorji: Digitalna krmiljenje HEIDENHAIN TNC 640 Paket HEIDENHAIN (motorji, merilni sistemi in ročni volan) IKZ: Knjdeq Ixh Hjpfx Ahvjd Notranja dovod hladilne tekočine – 36 bar Dodatna oprema: Standardni menjalec orodij z dvojnim prijemalom, 40 pozicij Dvojni členarjeni pasni transporter za odrezke (vzdolžno), eden spredaj in eden zadaj Priprava za 4. os (okrogla miza) Obodna zaščita Natančnost: Natančnost pozicioniranja: 0,025 mm Ponovljivost: 0,008 mm Odgovarjamo le na povpraševanja iz Nemčije // Obdelujemo le povpraševanja iz Nemčije

Stanje: generalkompletno obnovljen (rabljeno), Portalrichtpresse Druckkraft: 450 t Hub: 50 mm Lichte Weite: 1000 mm Arbeitsbereich: Länge: 5.200 mm Breite: 2.300 mm Knodpfxefcnu Ij Ahvjd Höhe: 1.000 mm Gewicht: 45.000 kg Schraubenabstand links-rechts: 1.000 mm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, laserska moč: 4.000 W, moč: 4 kW (5,44 KM), trajanje garancije: 12 meseci, Oprema: dokumentacija / priročnik, SEJEMSKI STROJ PO AKCIJSKI CENI!!! SF 1530G 4KW Max 5G laserski vir s Precitec glavo. Omogoča tudi rezanje aluminija! Ta kompaktni stroj s stransko izvlečno mizo prihrani prostor, hkrati pa omogoča obdelavo velikih plošč. Območje rezanja: 1500x3000 mm. Idealno tudi za vaše podjetje! Možno rezanje do 18 mm (navadno jeklo S235)!! Knjdpfx Ahsqwzuxevsd

Leto izdelave: 2022, Stanje: novo, immediately available CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600kN - Max. bending length: 3100mm - Year of manufacture: 2022 - CNC-controlled hydraulic crowning - Cybelec Modeva 19T control - WILA upper tool clamping system - 60mm table with 13.5mm x 22mm groove for sectional dies - 2 front support arms, adjustable on linear guides Kjdpfx Aeiwfp Tehvend - CE-compliant with Fiessler AKAS IIF (automatic height adjustment) - 24-month warranty - Commissioning, training available

Stanje: novo, Table height: 650 - 1050 mm Knedpfxjfk Aifj Ahvod Dimensions (LxWxH): 2480 x 1230 x 650 to 1050 mm Table width: 1230 mm Table length: 2480 mm Approximate weight: 733 kg This allows the user to flexibly adjust the working surface height to suit specific requirements, thereby improving both efficiency and ergonomics. The height adjustment is provided as standard via manual hydraulics, within a range of 650 – 1050 mm (greater or lower adjustments available upon request). Like the SST fixed series, the worktop also features a 100 x 100 mm grid pattern with Ø 28 mm holes. When used in combination with machining equipment, inspection or rework fixtures (deburring, marking, inspection) can be adjusted to match the height of the machine clamping table. The table systems can be easily relocated using a pallet truck. These mobile systems, with various clamping and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely serviced on site immediately after removal from the machine and then transferred to maintenance for repairs. The fully bolted construction of the clamping plate allows the working surface to be replaced cost-effectively if it becomes worn. Price must be requested from the manufacturer prior to ordering! For accessories and further information, please follow this link: