Stroj za upogibanje cevi

Duralbend ATLAS BRF32 - Auto Pipe Bending Machine

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel VA 0.2 260 N/mm²) → Total connected load 3 kW → Tube feed-in length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display allows for easy and intuitive programming and operation of the machine. After the tube is inserted, it is fixed in place by the chuck in the carriage, ensuring precise positioning and permitting the production of dimensionally accurate geometries. Standard features also include a tube geometry check before the bending process: if the bending process is started at the wrong position, the machine will not release the bending operation—misoperation is prevented. Optional additional features increase comfort, boost output, and thus enhance the system’s efficiency. Data exchange with the optional TBS-3D pipe calculation software (PC version) is done via USB stick or network. Existing tube geometries can be imported using the software. Standard features: → Servo drive on bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Servo-driven feed Laedpfx Ahetr U Hlsujc → Servo-driven rotation → Three-jaw chuck for clamping the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping force → Programmable early mandrel retraction PLC control: → 10" colour touchscreen → ETH 10/100, X2X Link, 2x USB → Foot switch operation → Data transfer via LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly at the machine. After entering length and angle, the controller automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Stanje: novo, Leto izdelave: 2025, Pipe diameter: 48.3 mm Wall thickness: 3.25 mm Bending radius min. / max.: 180 mm Bending speed: 20°/sec Total power requirement: 2.4 kW Machine weight: approx. 700 kg Space requirement: approx. 3880 x 800 x 1250 mm TUBOMAT complete system - length: 3000 mm Standard equipment for bending: • Electronic Siemens SIMATIC control • Function selection and operation via 4.3 inch touch panel • Familiar 4-position bending angle preselection or program mode • 80 memory slots, up to 10 sets • Actual/target value display for bending angle • Compact, forward-mounted bending head • Optimized tooling concept • Hydraulic bending drive, operated via proven hand lever • Hydraulic pipe clamping • Hydraulic pressure die positioning • Hydraulic mandrel retraction • Mobile machine design Saw unit for optimal right-angled cuts: • Visualization of saw position by line laser • Foldable saw guard • Adjustable saw feed Deburring unit for internal and external deburring Universal base mount as drive unit for assembly attachments • With swivel device for optimal accessibility Including optional equipment: - Includes 6 each of length and angle stops - length 3000 mm - 2-axis positioning display for length and rotation (displayed on touch panel) - length 3000 mm - Early mandrel retraction for optimum bend quality Laedpfx Aoxcuicohuec • For the use of ball mandrels • Mandrel is automatically retracted during the bending process • Adjustment programmable stepless up to 10° - Automatic mandrel lubrication as minimum quantity oil lubrication - TUBOLUB Z-M (5 litres / container) for minimum quantity lubrication - Interface for network connection and data import from PIPEFAB - Assembly attachment for cutting ring assembly with measuring system (automatic pressure adjustment) - Software - PIPEFAB 4.0 BE basic tube bending software package • Oracle Express database for single-user application • Creation of isometric drawings (single tube) • ConCSVImp - CSV import interface • Calculation of bending data considering springback, elongation and rebound • Checking of clamping lengths, start and end lengths • Output of bending data (printout) • BendSim - bending simulation and graphical display via parametric tooling layout • BendCon - generation and transfer of NC bending data for TUBOMAT - IsoTools – 3D display, labeling tools - ConSTEP - STEP file import interface - Tool holders - Bending tools consisting of bending die, clamping piece and fixed glide shoe - Bending mandrels 3000 mm for steel tubes, version with lubrication channel for minimum quantity oil lubrication - Pre-assembly studs - Counterhold plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes - Commissioning - Packaging costs

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Pressure: 25 tons Outreach: 160 mm Installation height: 500 mm Ljdpfx Ajfcw Apjhujac Table surface: 650 x 650 mm Ram surface (round): 140 mm Stroke: 130 mm Power requirement: 4 kW Weight: 2,000 kg Height: 2,100 mm Width: 1,100 mm Depth: 1,500 mm

Stanje: rabljeno, Single-column hydraulic press, straightening press, punching frame ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Lasdpfx Aod Swtaohujc Pressing force: 150 tons Throat depth: 125 mm Ram stroke: 35 mm Table size: 280 x 210 mm Ram face: Ø 125 mm Installation height (ram to table): max. 265 mm Table height above floor: 403 mm Hydraulic operating pressure: max. 500 bar - Without hydraulic power unit - Ram face with 4 x M16 threads and 20 mm guide slot, centrally located centering bore Ø 15 mm - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement (L x W x H): 700 x 300 x 1450 mm Weight: 1250 kg Good condition

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, laserska moč: 6.000 W, potovalna razdalja osi X: 3.030 mm, pomik osi Y: 1.520 mm, pomik po osi Z: 310 mm, skupna dolžina: 9.500 mm, skupna širina: 4.500 mm, skupna višina: 2.050 mm, Oprema: CE označba, centralizirani mazalni sistem, hladilna enota, menjalnik šob, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, VS-3015CE 6KW vlakenski laserski stroj za rezanje pločevine Delovno območje (mm): 3000×1500 Pomik osi X (mm): 1520 Pomik osi Y (mm): 3030 Pomik osi Z (mm): 310 Laedpfx Aov Ngraohujc Natančnost pozicioniranja osi X/Y: ≤0,03 mm/m Ponavljajoča natančnost pozicioniranja osi X/Y: ≤±0,02 mm Največja kombinirana hitrost pozicioniranja: 150 m/min Največje pospeševanje: 2G Dvostranska upravljalna plošča, prilagodljivo nameščanje pod različnimi koti, enostavna demontaža in možnost namestitve v standardni 40HQ kontejner. Industrijski klimatski sistem s konstantno temperaturo in vlago za stabilno delovanje. Avtomatski sistem za mazanje in vbrizgavanje olja, pametni nadzor tlaka zraka ter protivtrkalna zaščita za inteligentno varnost.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2008, številka stroja/vozila: LSP 100T, Proizvodna hidravlična stiskalnica s H-okvirjem 100t z vodenjem Proizvajalec Stenhoj Danska Leto izdelave 2008 Ljdpfxog Rn Efj Ahueac Maks. pritisk sile 1.000 kN / 318 bar Stiskalni valj, dolžina hoda 400 mm Miza stiskalnice s T-utorom zgoraj 1.500x900 mm spodaj 1.500x1.050 mm Prehod stojala 1.700 mm Stanje kot novo, stroj je bil uporabljen le za poskusna zaganjanja in je od takrat skladiščen. Vse informacije brez garancije. Brez stroškov prevoza.

Stanje: novo, minimalni premer metričnega navoja: 3 mm, največji premer metrickega navoja: 16 mm, skupna masa: 500 kg, dolžina podajanja os X: 3.000 mm, dolžina pomika po osi Y: 1.500 mm, dolžina podajanja os Z: 200 mm, vrtilni moment: 24 Nm, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 50 obr/min, moč: 0,005 kW (0,01 KM), The CMA 3-axis controlled tapping center is designed, among other things, for post-processing of laser-cut sheet metal parts and complete machining of, for example, small parts and tubes. Laodpfx Ahsrbz T Nsusc The machine offers the following machining capabilities: - Tapping - Drilling (standard / with chip breaking / tube drilling cycle) - Countersinking - Flow drilling (with optimized feed curve) - Reaming - Simple graphical programming - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to e.g., Demmeler and Siegmund welding tables) - Radial tool compensation via patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector - Intuitive safety system using light barriers Standard version: Automatic tool changer with 10 positions, mounted on the machine gantry

Stanje: rabljeno, Leto izdelave: 1993, Technical Details: Tube diameter: 80 mm Minimum tube diameter: 6 mm Control unit for program: Gelma MM-1 Tube feed length: 1800 mm Ljdju Ibyyepfx Ahuoac Approx. machine weight: 0.232 t Machine dimensions (LxWxH): approx. 1.9 x 0.7 x 1.3 m Semi-automatic TUBE BENDING MACHINE Operating modes: manual and semi-automatic operation Application: for multiple, repeatable bending operations of tubes (e.g. hydraulic piping) The swiveling unit with pre-selection for 3 different bending angles, usable in single or automatic mode. Currently, the machine is equipped with a stop rod for a tube size of Ø 10 mm for 6 angle settings. Bending radius depends on the material used. The tube bending machine is mobile/movable. Equipment/Accessories: 6 cam rods/stop rods 6 control discs Bending tool for Ø 12 mm

Stanje: pripravljen za uporabo (rabljen), Predmet moje dražbe so trakasti transporterji dolžine 3,3 m in širine traku 0,7 m. Na voljo imam 3 enake kose. Cena velja za trakasti transporter dolžine 3 m. Lsdpfx Aotrdy Iehueac Možna dostava.

Stanje: novo, Table diameter: 900 mm Table load capacity: 1 t Swivel range: 0–135 degrees Eccentricity: 200 mm Table rotation speed: 0.12 – 1.2 rpm Torque: 2000 Nm Total power requirement: 0.75 kW Space requirement approx. 1.5 x 1.02 x 0.9 m The D-HB series rotary tilt tables feature a heavy-duty design for exceptional stability, making them particularly suitable for heavy and precise positioning tasks as well as rotary welding operations. Features: - Easy installation - Increased productivity Ljdpfjgvkikex Ahujac - Improved weld quality due to optimal positioning and speed control - Reduced crane hours and handling times while enhancing workplace safety - Self-locking gearbox prevents overrun or backlash under eccentric loads - Electronic components by Schneider, Siemens, and Delta - Infinitely variable, frequency-controlled turntable speed - High stability through robust construction - CE certification - The D-HB series includes a remote control with foot pedal for left-right / start-stop operations.