Varjenje rotacijska miza

DUMETA D-TLP-HE-15

Stanje: dober (rabljeno), Leto izdelave: 2003, nosilnost: 150 kg, doseg roke: 2.700 mm, Model: KR150 Stanje: RABLJENO Leto: 2003 Krmilna omara: KRC2 Vključeno: Manipulator + krmilna omara KRC2 + vsi kompleti kablov Za ponudbo in možnosti obnove nas prosim kontaktirajte. Kot PLC Merkezi EOOD imamo na zalogi več kot 300 robotov in delamo z znamkami KUKA, ABB, FANUC in Motoman. Bodpfx Aiehakfaeqoln

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW Bjdpfouz If Njx Aiqeln - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangle 300 x 180 mm Saw blade length 2,765 x 27 x 0.9 mm Table height 950 mm Band speed 35 + 70 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m Double mitre metal band saw, GBS 250 Super AutoCut (20413) - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing rotary table - Quick-release vice - Heavy-duty, large material support - Automatic coolant system Blodpfx Asurc S Reiqen

Stanje: novo, Table diameter: 490 mm Table load capacity: 300/150 kg Bledpjgvkktofx Aiqjn Swivel range: 0-90° manual Table load, horizontal: 300 kg Table load, vertical: 150 kg Bore diameter: 65 mm Table rotation speed: 0.4 - 4.0 rpm Voltage: 230 V Total power requirement: 0.2 kW Machine weight: approx. 0.1 t Space required: approx. 0.5 x 0.52 x 0.5 m The D-DWP welding positioners are equipped with a hollow shaft in the turntable. This feature significantly expands the options for flexible positioning and circumferential welding of your component. For example, this is particularly advantageous when welding with backing gas. Utilising these tilting rotary tables can increase your production rate and further improve product quality. Thanks to their compact design, the D-DWP series can be integrated into any existing production facility in a space-saving manner. Features: - Foot pedal included - Stepless speed control - Very high stability – compact model - Through-hole in the turntable - CE marking

Leto izdelave: 2022, stanje: kot nova (razstavni stroj), Welding turntable Protec KT 1200 kg Motorized, infinitely variable tilt and speed control Motor 0.75 kW with remote control Foot switch Table diameter 1200 mm Height 1000 mm Length 1400 mm Width 1500 mm Bodpfx Aiscrmyfjqeln Speed range from 0.05 to 0.5 rpm

Stanje: novo, Table length 1590 mm Table width 1490 mm Table height 840 - 890 mm Machine weight approx. 0.4 t Welding table / perforated table: Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15. Surface is untreated. Side walls 165 mm Height adjustable from approx. 880 - 980 mm Bottom side ribbed for reinforcement. Including floor bearings Accessories optional!! Bsdpfx Aoh Dqb Deiqsln Surface flatness 0.2 - 0.4 mm over 1000 mm. The table can be moved with a pallet truck. Pallet truck not included in the scope of delivery.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2008, številka stroja/vozila: LSP 100T, Proizvodna hidravlična stiskalnica s H-okvirjem 100t z vodenjem Proizvajalec Stenhoj Danska Leto izdelave 2008 Maks. pritisk sile 1.000 kN / 318 bar Stiskalni valj, dolžina hoda 400 mm Miza stiskalnice s T-utorom zgoraj 1.500x900 mm spodaj 1.500x1.050 mm Prehod stojala 1.700 mm Stanje kot novo, stroj je bil uporabljen le za poskusna zaganjanja in je od takrat skladiščen. Vse informacije brez garancije. Brez stroškov prevoza. Bledpfx Aijg Rn Efeqen

Stanje: dober (rabljeno), Leto izdelave: 2001, Stroj je v dobrem stanju. Deli, ki so prikazani ročno, niso vključeni. Rezalna orodja niso priložena. Blsdpfx Aiorpk Rmoqon

Stanje: novo, Table diameter 900 mm Table load capacity 1.0 t Swivel range 135 degrees Rotational speed 0.12 - 1.2 rpm Faceplate height 820 mm Welding current 500 amperes Total power requirement 0.75 + 0.55 kW Blsdpfx Aefv Axxeiqjn Machine weight approx. 1.1 t Space requirement approx. 1.5 x 1.0 x 0.9 m • Self-locking gearbox, therefore no overrun or backrun under eccentric load. • Electronic components from Schneider, Siemens, and Delta. • Infinitely variable speed control of the turntable via frequency inverter. • High stability due to robust construction. • Welding current transmission. • CE certificate. • Excellent price / quality ratio. • The D-HBE series is supplied as standard with a wired remote control and foot switch.

Stanje: novo, Leto izdelave: 2024, nosilnost: 1.500 kg, Special Price Promotion: €2,000 Discount Bjdpfx Aieuua Inoqsln Perforated Table 1200 x 2400 x 200 mm Tabletop Thickness: 20 mm, Hole Diameter: 28 mm Swivel Range: 360° Height Adjustment: Hydraulic Motor, 800 to 1200 mm Rotational Speed: 0.5 rpm Motor Power: 0.75 kW We offer the tables in various sizes and load capacities: Load capacity 500 kg, Dimensions: 1000 x 1500 x 200 mm, 28 mm holes, with manual or automatic height adjustment Load capacity 1000 kg, Dimensions: 1000 x 2000 x 200 mm, 28 mm holes, with manual or automatic height adjustment Load capacity 1500 kg, Dimensions: 1200 x 2400 x 200 mm, 28 mm holes, with manual or automatic height adjustment Load capacity 2000 kg, Dimensions: 1200 x 2400 x 200 mm, 28 mm holes, with manual or automatic height adjustment Load capacity 3000 kg, Dimensions: 1200 x 2400 x 200 mm, 28 mm holes, with manual or automatic height adjustment Load capacity 5000 kg, Dimensions: 1500 x 3000 x 200 mm, 28 mm holes, with manual or automatic height adjustment