Enota obračanja plovila

DUMETA D-HGZ-20-D

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Set for finger jointing in medium and high volume production. The machine is technically efficient and in good condition. The set includes several tool kits. Features: – Industrial set with a single tenoning machine. Operator-supervised pack loading allows for processing of lower grade raw material, – Process controlled by microprocessors (automatic control), – Rotation of the pack after each cycle on a rotary table (butt joint) or flipping the pack on its back (face jointing for furniture, unique GOMA solution), – Set includes an automatic press loading station, – Possibility of intermediate cutting on the press, TENONER WITH FEED TABLE Specification Values Spindle diameter (milling): 50 x 210 mm Spindle speed: 6,000 rpm Main motor: 18.5 kW Tool dimensions: 250 x 160 mm Saw spindle: for trimming board ends Special chipper: 300 x 8 mm Chipper motor: 6 kW / 3,000 rpm Feed table: infinitely variable speed Working width x height: 600 x 30–160 mm Glue nozzle profile: according to tooling FC-10 PZ6/2 PRESS Specification Values Board width: 30–160 mm Nodpfx Aolu D Tfobbjcl Board thickness: 20–70 mm Finished board length: 6,000 mm Pressing force: 3 – 7.5 – 10 T Hydraulic power unit: 3 kW / 140 bar

Leto izdelave: 2023, Stanje: kot nova (razstavni stroj), Technical data: - Load capacity: 15,000 kg - Dead weight: 960 kg - Workpiece diameter (insertable): approx. 50 – 3,200 mm - Roller diameter: 250 mm - Roller width: 240 mm - Rotation speed: approx. 100–2,000 mm/min Nedpfx Asd Iuqaobbscl - Two-pedal foot switch - Potentiometer for stepless speed control

Leto izdelave: 2009, Stanje: delavnici obnovljeno (rabljeno), The roller stand is also available for rental (trial rental possible). Maximum load: 100t per set, consisting of 1x drive and 1x idler unit Workpiece diameter: 500 – 7,500 mm Nedpfxjmk Ikts Abbjcl Rotation speed: approx. 130 - 1250 mm/min Roller material: polyurethane Control: wired handheld pendant Additional options available, e.g.: additional idler units, foot switch

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, hladilna zmogljivost: 56 kW (76,14 KM), vrsta hlajenja: voda, vhodna frekvenca: 50 Hz, ogrevalna zmogljivost: 67 kW (91,09 KM), vrsta goriva: plin, "SANYO" PANASONIC ECO G Gas Heat Pump Air Conditioner Model: SGP-E190J2GU2W Nissan FY5 engine Power supply: 230 V AC, 1 phase, 50 Hz Max. electrical power input: 1.16 kW, 5.4 A (continuous operation) Device protection rating: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Thermal input (GCV) (cooling): 43.5 kW Thermal input (GCV) (heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high-side: 30 bar Design pressure low-side: 16 bar FOR OUTDOOR USE ONLY! Ncjdpfxjd Tiu Eo Abbol We have 4 units in stock!

Stanje: novo, Leto izdelave: 2024, Drilling and Milling Unit Kudu with CNC Control and Tool Changer (3-axis) Drilling and milling unit with traversing machining head – the table remains stationary while the drilling head moves. The unit supports both manual and fully automatic operation modes. After each drilling cycle, the machining unit automatically repositions itself in both the X and Y axes to the next drilling position. The operation is kept very user-friendly. Data transfer to the machine control is possible in DXF/DWG file formats via a programming station. Alternatively, programming can be performed directly at the machine control. The machine is highly robust and built from proven machine components. Technical Specifications: - Measuring length: 6,000 mm - Total length: 8,050 mm - Rigid machine base frame - Drilling head speed: up to 2,500 rpm (standard version); delivered with the optimal speed for your application - Tool holder: SK 40 - X, Y, and Z-axis driven by servomotors - Rapid traverse in X-axis: 20 m/min - Rapid traverse in Y-axis: 5 m/min - Distance from table top to tool holder bottom: 400 mm - Table width: 480 mm - Working height: 1,050 mm - Drilling diameter: 3 to 30 mm in St. 50 (tool-dependent) - Tapping: M4 – M30 (with compensation chuck) - Y-axis machining travel: 300 mm - X-axis tolerance: ±0.1 mm Ncedpofu Ivzofx Abbel - Y-axis tolerance: 0.06 mm - Z-axis tolerance: 0.06 mm - Drilling head drive motor: 5.5 kW - Machine weight: 2,300 kg - Machine dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) - Power supply: 32 A - Air supply: 8 bar - Front safety via light barrier - Rear access protection via machine fence - Control: 21.5" touch screen panel with reinforced front glass - Simple programming at the machine - Milling of long holes and circles - Lubrication via minimum quantity spraying system - Without material clamps - Remote maintenance via TeamViewer possible (LAN interface) - Tool storage for drilling tools, with dimensions and speed - Simulation of work processes - Digital handwheel Your Advantages: - Workpiece surfaces are protected - Clear, graphical user interface - Machining right to the end of the workpiece is no problem - 50% space saving compared to moving-table systems - Chips are collected in an integrated chip tray - Easiest programming & operation - Minimum quantity spraying system (standard) - Programming errors are eliminated through CAD/CAM You are welcome to inspect the desired system at our production/demo facility at any time. Please feel free to contact us. Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2025, Enostavno vzdrževalna naprava za odstranjevanje prahu, posebej razvita za agresiven peskalni prah z predsobo s prizmatičnim ločevalnikom, v osnovi sestavljena iz: a) 1 kos kartušnega suhega filtra, tip PF 2.16.B250 za 30.000 m³/h (na voljo tudi druge velikosti) Sestavljen iz stabilnega, vakuumsko neprepustnega 3 mm jeklenega ohišja, razdeljenega na surovi plinski prostor s filtrskimi kartušami, filtrsko predsobo s prizmatičnim ločevalnikom in čistim plinskim prostorom s čiščenjem filtra z uporabo stisnjenega zraka, vsak z ločenimi servisnimi vrati Easy Open. Lijak za zbiranje prahu z režnim ventilom ali zvezdastim dozatorjem za odstranjevanje prahu z Big Bag vrečami. Krmiljenje magnetnega ventila z indikatorjem diferenčnega tlaka za optimalno nastavitev čiščenja filtrov. Ncjdpfx Abjdrtalsbsl Servisna vrata kot nihajna vrata – enostavno vzdrževanje.

Stanje: rabljeno, Leto izdelave: 2004, WEINIG GRECON DOUBLE-END FINGER JOINT LINE MOD. PJ 150/500 - CE - USED - Infeed wood length: 150 - 700 mm - Wood width: 40 - 150 mm Nsdswry I Espfx Abbecl - Wood thickness: 18 - 80 mm - Press length: 6100 mm - Pressing force: 120 kN - Milling motor: 15 kW - Scorer: 5.5 kW - Year: 2004 CE

Stanje: novo, Table diameter: 490 mm Table load capacity: 300/150 kg Swivel range: 0-90° manual Table load, horizontal: 300 kg Table load, vertical: 150 kg Nedpfx Absgvkktobscl Bore diameter: 65 mm Table rotation speed: 0.4 - 4.0 rpm Voltage: 230 V Total power requirement: 0.2 kW Machine weight: approx. 0.1 t Space required: approx. 0.5 x 0.52 x 0.5 m The D-DWP welding positioners are equipped with a hollow shaft in the turntable. This feature significantly expands the options for flexible positioning and circumferential welding of your component. For example, this is particularly advantageous when welding with backing gas. Utilising these tilting rotary tables can increase your production rate and further improve product quality. Thanks to their compact design, the D-DWP series can be integrated into any existing production facility in a space-saving manner. Features: - Foot pedal included - Stepless speed control - Very high stability – compact model - Through-hole in the turntable - CE marking

Stanje: novo, Load capacity 10 t Workpiece diameter 100 - 3200 mm Drum diameter 300 x 120 mm Feed rate 100 - 1000 mm/min Total power requirement 2 x 0.55 kW Njdjf Ep Dijpfx Abbjcl Features • Electronic components from Siemens/Schneider/Delta • Frequency-controlled drive unit speed • Rollers: steel/rubber • High stability due to robust construction • CE certificate • Excellent price-performance ratio • Cable remote control • Dual foot pedal • 3-year warranty (see warranty conditions)

Stanje: novo, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Oprema: CE označba, dvostranski, Line for longitudinal jointing with two milling machines. The press is 6000 mm long. The machine is new and has never been used. All corresponding tools are included with the machine. Ncsdjwptnmepfx Abbel