Varjenje rotacijska miza

DUMETA D-DWP-100

Stanje: novo, Table diameter: 350 mm Table load capacity: 0.1 t Swivel range: 0–90 degrees Table load horizontal: 100 kg Table load vertical: 50 kg Bore diameter: 30 mm Cgjdpfx Asgvkk Njfnop Table rotation speed: 0.5 – 5 rpm Voltage: 230 V Total power requirement: 0.2 kW Machine weight approx.: 0.2 t Required space approx.: 0.5 x 0.5 x 0.5 m Welding Table with Hollow Shaft D-DWP Rotary tilt tables with bore for rotating, tilting, and welding small workpieces up to 100 kg. - Rotary and tilt axis - Steplessly adjustable speed - Compact design - Including foot pedal

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Cjdpfx Aofxyhfefnogp Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: novo, The NEOMIG-i 500 G is a three-phase multiprocess welding machine with a separate wire feeder. Its advanced digital technology and duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. Integrated synergic functions facilitate setup and reduce spatter during welding. Equipped with the WF wire feeder, it offers precise welding parameter control to guarantee perfect quality. MULTI-PROCESS MIG/MAG: - Steel and stainless steel wire: Ø from 0.6 to 1.6 mm - Aluminium wire: Ø from 0.8 to 1.6 mm - CuSi and CuAl wire: Ø from 0.8 to 1.6 mm - Flux-cored wire (reverse polarity): Ø from 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile, and cellulose electrodes. Cgodpfxsmxkdpj Afnjp TIG DC Lift / Pulsed. Gouging.

Stanje: novo, Bernardo Horizontal Bandsaw HBS 275 - 400 V Cgodjd Du T Iopfx Afnjp Technical Specifications Cutting capacity round 90°: 225 mm Cutting capacity square 90°: 200 x 200 mm Cutting capacity flat 90°: 245 x 150 mm Cutting capacity round 45°: 160 mm Cutting capacity square 45°: 160 x 160 mm Cutting capacity round 60°: 100 mm Cutting capacity square 60°: 100 x 100 mm Working height: 910 mm Saw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds 400 V: 45 / 90 m/min Coolant pump S1 100%: 100 W Motor output S1 100%: 1.1 kW Motor input S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight approx.: 190 kg Scope of delivery • Saw blade • Workpiece stop • Base frame • Band tension pressure gauge • Quick-action vice • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Stanje: novo, Leto izdelave: 2025, New machine. Please request the current daily price and delivery time. Dimensions and Weights: Length (product): approx. 2129 mm Width/Depth (product): approx. 1046 mm Height (product): approx. 1687 mm Weight (net): approx. 645 kg Electrical Data: Drive motor power: 3 kW Supply voltage: 400 V Mains frequency: 50 Hz Hydraulic pump motor power: 1.4 kW Coolant pump motor power: 100 W Total connected load: 3.8 kW Cgjdpforah S Hjx Afnjp Machine Data: Saw band speed(s): 20 – 80 m/min Saw band length: 3770 mm Saw band width: 34 mm Saw band thickness: 1.1 mm Cutting angle: -45 – 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting Ranges: Cutting range 0° round (solid material): 355 mm Cutting range 0° square (solid material): 300 mm Cutting range 0° upright rectangle (solid material): 300 x 490 mm Cutting range -45° round (solid material): 290 mm Cutting range -45° square (solid material): 250 mm Cutting range -45° upright rectangle (solid material): 250 x 250 mm Cutting range +45° round (solid material): 350 mm Cutting range +45° square (solid material): 290 mm Cutting range +45° upright rectangle (solid material): 290 x 340 mm Cutting range +60° round (solid material): 230 mm Cutting range +60° square (solid material): 180 mm Cutting range +60° upright rectangle (solid material): 180 x 220 mm

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) Cedsnh R Ekepfx Afnegp OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials. Two-pole drive motor enables saw band speeds of 30 and 65 m/min. Electromechanical blade tension monitoring via microswitch. When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking at the cylinder is needed. Cjdpfx Afeg U Uv Renegp Saw arm inclined by 25°, resulting in longer saw band service life. Precise and robust band guides with adjustable carbide plates. After completion of the cutting process, the saw band stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting ranges 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular (hollow section, horizontal): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular (hollow section, horizontal): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular (hollow section, horizontal): 90 x 90 mm Item no.: 3680001 Location: In stock, 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2023, doseg roke: 1.400 mm, nosilnost: 6 kg, New welding robot TIG OKIO AB6-C1400 -Country of origin: China -Model: AB6-C1400 -Number of axes: 6 -Reach: 1400 mm -Maximum payload: 6 kg -Control cabinet Codpfjqnt N Dsx Afnjgp -Remote control -Wire feeder -Welding power source: TIG WSM400R -Cooler

Stanje: kot nova (razstavni stroj), A demonstration belt grinder WIEGAND with two belt speeds, ideal for steel and stainless steel Belt dimensions: 2000 x 150 mm Belt speed: 18 / 37 m/sec Cgedpfjpgmufox Afnjp Power: 2.2 / 3.8 kW, 400V/50Hz Weight: 110 kg Technical data and dimensions: Subject to change/errors excepted

Stanje: novo, Cutting capacity at 90 degrees, round: 240 mm Cutting capacity at 90 degrees, square: 240 mm Cutting capacity at 90 degrees, rectangular: 165 x 310 mm Saw band length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Csdpfshpktvsx Afnegp Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Emulsion pump - Eccentric clamp - Base frame - Saw band - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.