Obdelovalni center

Droop & Rein Modimill

Stanje: dober (rabljeno), Leto izdelave: 1999, x-travel 2400 mm y-travel 2850 mm z-travel 1000 mm Control: FIDIA C20 Gedpfx Abovwgphe Teca Table dimensions (lengthways): 2200 mm Table dimensions (crossways): 1800 mm Table load capacity: 12 t Workpiece changer: 30 positions Tool holder: ISI SK-50 Spindle speeds: 5000 rpm Drive power – milling spindle: 30 kW This universal machining center ModiMill by Droop & Rein is in good condition and can be inspected under power at the seller's premises by appointment. Description: - 30-position tool changer: 20 slots ISO SK-50 10 slots HSK 63 - Two milling spindles: SK-50 with 5000 rpm HSK 63 with 18000 rpm - Rotary table 2200 x 1800 mm

Stanje: dober (rabljeno), Leto izdelave: 2000, Daewoo Puma 230, Year of manufacture: 2000, Control: Fanuc 18 iT, Turning length: 548 mm, Turning diameter: 350 mm, Turret: 10-position, Tailstock: dragged, Three-jaw chuck diameter: 254 mm, Tool measuring arm, Chip conveyor, Coolant unit, Main spindle with new bearings, Gcodpfx Abewx I Efs Tsa Box ways, Accessories,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 83 mm, stružna dolžina: 1.000 mm, premer struženja: 570 mm, premer struženja nad zgornjim sanežem: 340 mm, premer tulec: 80 mm, hod vretena: 200 mm, skupna masa: 3.200 kg, zunanji premer vpenjalne glave: 250 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machine is in very good condition. Gcsdpfewxw S Iex Ab Tja Available immediately! Can be tested under power.

Stanje: rabljeno, Leto izdelave: 2009, obratovalne ure: 6.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 800 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, model krmilnika: Heidenhain iTNC530, največja hitrost vretena: 36.000 obr/min, GF Mirkon XSM600U X: 800 mm Y: 600 mm Z: 500 mm A-axis: +30° / -100° C-axis: 360° continuous Gcodpfx Abowa R A Nj Tea Spindle HSK50: max. 36,000 rpm, 25 kW Handwheel HR410 Tool changer: 60 positions Rotary table including 3R clamping system Chip conveyor Coolant system with 20 bar through-spindle coolant (IKZ) Tool measurement system: Blum Laser 3D probe: M&H Pallet automation with 21 pallets – pallets are not included in the scope of delivery The machine is offered on behalf of the customer!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, x-travel 14,000 mm y-travel 5,000 mm z-travel 1,500 mm w-axis 3,000 mm Column clearance 4,000 mm Gantry column: Distance table – spindle nose 4,500 mm Workpiece weight 100 t Table dimensions – longitudinal 9,000 mm Gsdpfovwgm Hex Ab Toca Table dimensions – cross 3,000 mm Spindle taper ISO SK 50 Spindle speed 2–2,500 rpm Spindle drive 113 kW Spindle diameter 200 mm Spindle torque 9,500 Nm Feed range x-axis 1–10,000 mm/min Feed range y-axis 1–10,000 mm/min Feed range z-axis 1–10,000 mm/min Rapid traverse 20,000 mm/min Height above floor 8,600 mm Control SIEMENS 840C Machine weight approx. 360 t >>> retrofit 2011

Stanje: rabljeno, Leto izdelave: 2010, x-axis travel: 730 mm y-axis travel: 730 mm z-axis travel: 730 mm Control: Matrix Nexus Mazatrol Main spindle: Speed range – main spindle: 35 – 18,000 rpm Drive power – milling spindle: 35 / 26 kW Tool holder: ISO 40 DIN 69871A Number of gear stages: 2 Pallet changer: Number of pallets: 6 (5+1) Pallet size: 500 x 500 mm Gcodpfx Abjup H Dre Toa Max. workpiece weight: 700 kg Max. workpiece diameter: 800 mm Max. workpiece height: 1,000 mm Pallet change time: 7 sec B-axis (table): 0.001° Tool changer: Number of tool stations: 160 positions Tool holder: ISO 40 DIN 69871A Max. tool diameter: 95 mm Max. tool diameter with adjacent empty pocket: 150 mm Max. tool length: 420 mm Max. tool weight: 12 kg Tool-to-tool change time: 2.7 / 3.2 sec Feed rates: Rapid traverse: 60 m/min Max. feed rate: 60,000 mm/min Total power requirement: 78.5 kVA Machine weight approx.: 16.4 t Space requirements approx.: 7.5 x 3.5 x 3.0 m CNC horizontal machining center MAZAK – Nexus 5000 II - Pallet changer 6 (5+1) positions - WITHOUT tools

Stanje: rabljeno, Leto izdelave: 1953, Turning length / mm Swing diameter over the table // mm Faceplate diameter / mm Faceplate diameter: approx. 3600 mm Centre height over the table: approx. 1500 mm Swing diameter over table: 2600 mm Swing diameter in pit: 3600 mm Swing diameter over bed: 1300 mm Turning length: approx. 2400 mm Max. workpiece weight: 22,000 kg Max. torque at faceplate: 5000 mkg Faceplate ring gear pitch diameter: 1900 mm Main spindle bore: 120 mm Speed range normal: 0.71–35.5 rpm increased: 1–50 rpm increased: 1.4–71 rpm Total power: 38 kW Gcedpeua Iw Tefx Ab Tja Total weight: approx. 42.5 tonnes

Leto izdelave: 2005, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, lastna masa: 1.600 kg, največja dovoljena obremenitev: 1.000 kg, notranja višina: 1.200 mm, notranja dolžina: 1.390 mm, notranja širina: 1.390 mm, nazivna moč: 64.000 kW (87.015,68 KM), zmogljivost črpalke: 500 l/min, tlak črpalke: 450.000 letvica, kapaciteta rezervoarja za vodo: 800 l, številka stroja/vozila: 25191, Industrial machine and parts cleaning device. Equipped with 3 washing chambers: one main and two auxiliary. Technical condition: Excellent – used only a few times. Model number: C-1600-33EHSS-PD1 Serial number: 25191 List of main machine components: Gsdorkz Stopfx Ab Tjca - Washing chamber door (with actuators) - Upper washing nozzle - Lower washing nozzle - High-pressure piping - Control cabinet - Main washing pump - Auxiliary pump 1 - Auxiliary pump 2 - Water heater (for each chamber) - Drain valve - Water level sensor - Parts washing basket - Oil separator - Steam vent - Water pressure indicators - Automatic water filling and chemical dosing system Additionally, the set includes a reverse osmosis water filter.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 700 mm, pomik osi Y: 500 mm, pomik po osi Z: 540 mm, hitro pomikanje X-os: 48 m/min, hitri pomik os Y: 48 m/min, hitri pomik na osi Z: 48 m/min, model krmilnika: Heidenhain TNC 640, skupna višina: 29.620 mm, skupna dolžina: 32.000 mm, skupna širina: 28.480 mm, obremenitev mize: 200 kg, premer vrtljive mize: 380 mm, skupna masa: 6.000 kg, največja hitrost vretena: 12.000 obr/min, dovod hladilne tekočine: 36 letvica, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Victor centrum obróbcze 5-osiowe VC-AX380 ze sterowaniem Heidenhain TNC640 5-osiowa obróbka symultaniczna z narzędziem kalibracyjnym KinematicsOpt oraz kulą kalibracyjną. Gsdpjq Tafxjfx Ab Tsca Opcje standardowe: - System chłodzenia z pompą do chłodziwa wysokociśnieniowego MTH4-40/4 i przewodami zasilającymi - Obudowa pełna chłodziwa - Chłodnica oleju wrzeciona - Separatot oleju - Przenośnik wiórów spiralny - Pistolet do płukania i dmuchawa powietrzna - Narzędzia obsługowe i instrukcje Opcje dodatkowe: - Powietrze przez wrzeciono - Klimatyzator w szafie sterowniczej - Przenośnik wiórów - 40 narzędzi - 36 bar wewnętrznego doprowadzenia chłodziwa (IKZ) z dupleksem Mahle - System płukania stołu - Sonda pomiarowa detalu TS460 - Automatyczne drzwi - Interfejs - Uchwyt 3-szczękowy 8" Zdjęcia poglądowe – rzeczywisty wygląd może się różnić. Dostępne z magazynu w Bergneustadt (sprzedaż w międzyczasie zastrzeżona).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, DESCRIPTION Hermle C 800 V CNC Vertical Machining Centre, manufactured in August 2000 in Germany. This milling center operates in three axes, with maximum X / Y / Z travel distances of 800, 600, and 500 mm. The machine is equipped with a Sinumerik 840D numerical control system and features a LAN connection to an external computer. Additionally, this machining centre comes with a chip conveyor, hydraulic clamping, a magazine for 87 tools, a swivel probe, and an electrical cabinet cooling unit. The spindle reaches a maximum speed of 15,000 rpm. Recorded spindle hours: approximately 4,500 hours. The total weight of the machining centre is around 7 tons. Technical specifications of the Hermle C 800 V CNC machining centre – Travel (X / Y / Z axis): 800 / 600 / 500 mm – Rapid traverse: 35 m/min – Maximum spindle speed: 15,000 rpm – Oil mist extraction – Spindle power: 19 kW – Operating voltage: 400V; 3PH; 50Hz – Control voltage: 220V AC; 24V DC – Machine dimensions (L x W x H): 2.3 x 3 x 2.65 m – Total weight: 7,000 kg Equipment of the Hermle C 800 V CNC machining centre – CNC control: Sinumerik 840D – Tool magazine capacity: 87 slots – Tool holders: SK40 – Through-spindle coolant pump: 40 bar – Electrical cabinet air conditioning – Swivel probe – Chip conveyor Available separately as pictured: Tool pre-setting device Various SK40 tool holders Heidenhain TS32 touch probe (as new) Gcsdsiva Dkepfx Ab Tja