Dvojstebrična portalna rezkalna naprava

DROOP & REIN FPFL2200SA30KCN

Stanje: rabljeno, Leto izdelave: 1965, Core drilling diameter - max. 50 mm Drilling depth 2000 mm Swing diameter mm Drilling diameter max. 110 mm Total power requirement 30 kW Machine weight approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling Ø - Solid drilling approx. 2 - 50 mm - Boring out approx. 100 mm Drilling depth max. 1,600/possibly up to 2,000 mm (see stroke/installation length) Stroke of drilling carriage approx. 4,000 mm Distance between the two spindle heads 5,000 mm Center height above guideway 350/450 mm Feed rate of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt pulley: 260 - 650/650-1625 RPM Main spindle drive 24 kW Coolant pump drives: 1 x 7.5/15 kW - 1 x 15/28 kW Total drive approx. 60 kW 380 V - 50 Hz Total length of machine/guideways 7500/5000 mm Total weight approx. 10,000 kg Accessories / Special equipment: "Machine consists of the following elements: The main spindle on the left, followed by a BOZA, table group driven by ball screw spindle, BOZA with increased center height, and at the end a spindle head of the B 16 series with drive motor approx. 7.5 kW n = 900/2400 and 2400/6000; very large and elaborate coolant system with filtration unit, extensive accessories and drilling tools up to 100 mm Ø. " Suitable for rotating workpiece/fixed drilling tool/ELB and BTA processes, as well as for stationary workpiece and rotating drilling tool. Can operate with internal oil supply (ELB) as well as external oil supply (BTA). " Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate/min = 17/40/120 or 220/500 l/min. Capacity approx. 2,500 l. " Feed of the main carriage via ball screw spindle and steplessly controllable DC motor; currently, a cross-adjustable table approx. 500 mm, size approx. 800 x 800 mm, is mounted for clamping cubic and cylindrical workpieces. Electrical control via cam track approx. 2,500 mm and limit switches for rapid traverse, feed, and return. " 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck approx. 315 mm Ø, " Modernized control panel with speed display, feed setting and display, kW display, feed/rapid traverse switch (forward/reverse), etc. " 2 separate control cabinets, separate BOZA, sleeves, reducers, clamping aids, etc. Condition: good - soon ready for demonstration, machine is very valuable due to accessories Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice Further deep hole drilling machines constantly in stock - please contact us. Dksdpfx Abot Hwucogop

Stanje: zelo dobro (rabljeno), Leto izdelave: 1972, Funkcionalnost: popolnoma funkcionalen, Prodajamo ta stružnica. Priključena, možnost preizkusa. Stroj ima priloženo dodatno opremo. Stružni premer: 2.000 mm. Stružna dolžina: 10.000 mm. Največja masa obdelovanca: 60.000 kg. Premer obdelave: 2.000 mm. Video stroja je možno poslati preko aplikacije WhatsApp. Dkedpfx Aboxwmbmsgjp

Stanje: rabljeno, Leto izdelave: 1984, premer struženja nad prečnim suportom: 1.600 mm, premer struženja: 2.000 mm, premer struženja nad ležiščem sani: 2.000 mm, stružna dolžina: 35.000 mm, teža obdelovanca (maks.): 63.000 kg, Centre Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of Manufacture: 1984 Tandem construction on one bed with left and right headstocks Mirror double tailstock on both left and right sides Double carriage Steady rest included Roller rest included Operator panel with scales requires servicing and replacement Motorized tailstock for both left and right sides 3-bedway construction Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Field of application: Shipyards Propeller shafts Hydraulic cylinder shafts Camshafts Defense & Aeronautics Rolls and shafts for steel mills Crankshafts Dksdpfjynky Aex Abgsp Specifications Metric US Standard Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over carriage: 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Spindle speed: 180 RPM Feed rate X-axis: 5,000 mm/min Feed rate Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Dimensions (estimated): Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are implied. We recommend you verify all key details.

Stanje: dober (rabljeno), FEATURES Table diameter ⌀: 3200 mm Maximum turning/swing diameter ⌀ - With the cross-rail forward: 3300 mm - With the cross-rail backward: 5600 mm Minimum turning/swing diameter ⌀ - With the cross-rail forward: 800 mm - With the cross-rail backward: 3100 mm Maximum turning height: 750 mm Control: FAGOR 8025 Headstock RPM (2 ranges): - 0.5 - 10 rpm - 10 - 40 rpm Motor power: 80 HP Dkedpfx Abor I Ayksgsp Maximum table load: 30,000 kg

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Machine repainted in white in 2014 (per SIEMENS ENERGY specification) Technical Data Working Area - Max. swing diameter over bed: 570 mm - Max. swing diameter over cross slide: 365 mm - Max. turning length: 1500 mm - Centre height over flat bed: 280 mm - Max. workpiece weight: 400 / 1000 kg - Max. clamping length: 1300 mm Spindle - Spindle head as per DIN 55027, size 8, internal taper 70 - Spindle bore: Ø 62 mm - Spindle diameter in front bearing: 100 mm - Spindle length (depth): 200 mm - Max. chuck diameter: Ø 315 mm - Speed range: 3–2500 rpm - Max. faceplate diameter: Ø 560 mm - Max. faceplate speed: 700 rpm Dkjdpfx Ajx Ahx Djbgop - Max. torque: 1800 Nm Cross Slide – Travel - Longitudinal travel (Z-axis): 1160 mm - Cross travel (X-axis): 345 mm - Tool system Parat-3 - Tool size DIN 770 (h x b): 32 × 25 mm Tailstock - Manual tailstock adjustment - Quill taper: MK5 - Quill diameter: 80 mm - Quill stroke: 190 mm Accessories / Special Equipment - Control: SINUMERIK 810 D - 32-bit processor, digital control - ManualTurn with cycle support - 10.4’’ colour LCD monitor - Operating manual 094.0003.1330-00 - 3-jaw chuck Ø 315 mm - Faceplate Ø 350 mm (up to Ø 560 with thin plates) - Radius turning - Turret: Parat size 3, 4-position, 4 × 90° manual indexing - Chip conveyor Bürener Maschinenfabrik - Particularly suitable for: see manufacturing range Cycle lathe DUS560TI (APL 11301) Includes one combined 4-jaw Wescott chuck with fitted jaw set A tool holder (Tripan) is installed – without tools or tool holders One fixed steady rest Chip conveyor with coolant tank and integrated pump The machine is in operation. Currently, no significant defects or limitations in use are known. Operating manual is available. An internal assessment inspection report from 2017 and the machine data sheet are attached.

Stanje: rabljeno, Radial Drilling Machine CSEPEL Type RFh 75 / 1500 Machine No. 13704 Year of manufacture: 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle taper: MK 5 Rated arm reach: 1500 mm Maximum spindle reach: 1500 mm (to column) Minimum spindle reach: 440 mm (to column) Distance spindle nose – clamping surface: 370 - 1700 mm Vertical adjustment of arm: 950 mm Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Quill travel: 380 mm Spindle speed: 19-1900 rpm, 21 steps Feed: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Mains connection: 380 Volt, 50 Hz, 15 kW - Forward/reverse spindle rotation via hand lever switch Dkedpfxolhwr Rj Abgjp - Hydraulic gear shifting for spindle speed and feed - Hydro-mechanical central clamping - Motorized arm height adjustment - Without coolant system - Machine lamp - Operating manual Required space: Length 2720 mm x Width 1170 mm x Maximum height 3770 mm Transport height with motor on column: 3500 mm Transport height without motor on column: 3250 mm Weight: 6.3 tons Good condition

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1969, Višina konic: 355 mm Razdalja med konicama: 3000 mm Maks. premer obdelave nad posteljo/izrezi/naklonom: 715/790/520 mm Vrtina vretena: 86 mm Sprejem vretena po DIN 55027: Vel. 11 Stožec konjička: MK 5 Dksdpfxoxpuu Eo Abgep 21 hitrost vretena: 5,6 - 560 min⁻¹ 42 podajalne hitrosti vzdolžno/prečno: 0,09 - 5,6/0,045 - 2,8 mm 22 Whitworth navojev: 2 - 28 Gg 28 metskih navojnih korakov: 1 - 14 mm 27 modulnih navojev: 0,25 - 3,5 modul 32 modulnih navojev: 4 - 56 modul 32 Diametral-Pitch navojev: 8 - 112 DP Pogon motorja, polpreklopni: 380 V, 7/11 kW Teža pribl.: 7 t Potrebna površina pribl.: 6000 x 2300 mm

Stanje: dober (rabljeno), Manufacturer: Ursviken Type: VPF 1000/800-5.0 Control: Siemens SIMATIC panel Year of manufacture: 1970 Dkodpfskvmi Sjx Abgep Hydraulic press for the production of large components such as dished ends, tanks, boilers, shipbuilding, and steel construction. Upgraded in 2015 with Siemens SIMATIC panel and Rittal E-Cabinet Installation height: 2,950 mm Maximum die height: 1,500 mm Movable table & ram in X direction Extensive die set package with radii: 10/20/30/50/60/80/100 mm Pressing force: 210 kg/cm² Maximum stroke: 800 mm Machine embedded 2,350 mm below ground level Specifications: Metric | US Standard Capacity: 1,000 t Distance between uprights: 5,010 mm Table length: 3,000 mm Table width: 2,000 mm Table height: 550 mm Ram stroke: 1,450 mm Approach speed: 50 mm/min Working speed: 5 mm/min Return speed: 50 mm/min Dimensions (approx.): Length: 0 mm Width: 0 mm Height: 0 mm Weight: 0 kg Please note: The information provided on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is supplied in good faith, but accuracy cannot be guaranteed. As such, no representation or contractual obligations shall be assumed. We recommend verifying all critical details.

Stanje: dober (rabljeno), Leto izdelave: 2007, Stroj je v zelo dobrem stanju. Postaja za nalaganje in razlaganje PROMOT ni vključena v obseg dobave. Na voljo je različno orodje/pribor za stroj. Tehnične podatke o stroju si lahko ogledate na zadnjih dveh slikah. Djdpexf Iamefx Abgjkp

Stanje: dober (rabljeno), Leto izdelave: 2010, Stroj ima možnost pogonskih orodij in Y-os. Rezalna orodja niso priložena. Deli, prikazani z roko, niso vključeni. Tehnične podrobnosti so prikazane na slikah. Dkodpfxoxpw Nlj Abgsp